1,684 research outputs found
Galactic-Center Hyper-Shell Model for the North Polar Spurs
The bipolar-hyper shell (BHS) model for the North Polar Spurs (NPS-E, -W, and
Loop I) and counter southern spurs (SPS-E and -W) is revisited based on
numerical hydrodynamical simulations. Propagations of shock waves produced by
energetic explosive events in the Galactic Center are examined. Distributions
of soft X-ray brightness on the sky at 0.25, 0.7, and 1.5 keV in a +/-50 deg x
+/-50 deg region around the Galactic Center are modeled by thermal emission
from high-temperature plasma in the shock-compressed shell considering
shadowing by the interstellar HI and H2 gases. The result is compared with the
ROSAT wide field X-ray images in R2, 4 and 6 bands. The NPS and southern spurs
are well reproduced by the simulation as shadowed dumbbell-shaped shock waves.
We discuss the origin and energetics of the event in relation to the starburst
and/or AGN activities in the Galactic Center. [ High resolution pdf is
available at http://www.ioa.s.u-tokyo.ac.jp/~sofue/htdocs/2016bhs/ ]Comment: 13 pages, 20 figures; To appear in MNRA
Physicochemical influence on the spatial distribution of faecal bacteria and polychaetes in the Densu Estuary, Ghana
Coastal ecosystems are increasingly impacted by man-made disturbances including pollution from agriculture, aquaculture and municipal waste. This study employed multiple ecological indicators to assess environmental quality of the Densu Estuary and understanding of environmental controls on the spatial distribution of organisms. Physicochemical parameters were measured in situ. Water and sediment samples were collected from ten stations and analysed for nutrients, total suspended solids and organisms using standard methods. The water quality index for the Densu Estuary ranged from 359.5 to 484.4, suggesting an unhealthy ecosystem. The abundance of indicator species, e.g. faecal bacteria (Escherichia coli, Enterococcus species) and polychaetes (Capitella and Nereis species) varied significantly (p<0.05) among stations. Contaminated sites are located landwards with high human impacts. Faecal bacteria and polychaete abundance correlated significantly (p<0.05) with the respective physicochemical parameters. Canonical analysis (74.11%) showed the physicochemical influence on the spatial distribution of species. The pH significantly (p<0.05) controlled the spatial distribution of faecal bacteria and polychaetes in the Densu Estuary. The results suggest environmental pollution in the Densu Estuary, useful baseline information for effective legislation towards its sustainable management
Aquatic Biota in Winter Flooded Paddy Field with Organic Farming : Case Study in Field Science Center, Tohoku University, Japan
Poster Sessio
Electric field and tip geometry effects on dielectrophoretic growth of carbon nanotube nanofibrils on scanning probes
Single-wall carbon nanotube (SWNT) nanofibrils were assembled onto a variety
of conductive scanning probes including atomic force microscope (AFM) tips and
scanning tunnelling microscope (STM) needles using positive dielectrophoresis
(DEP). The magnitude of the applied electric field was varied in the range of
1-20 V to investigate its effect on the dimensions of the assembled SWNT
nanofibrils. Both length and diameter grew asymptotically as voltage increased
from 5 to 18 V. Below 4 V, stable attachment of SWNT nanofibrils could not be
achieved due to the relatively weak DEP force versus Brownian motion. At
voltages of 20 V and higher, low quality nanofibrils resulted from
incorporating large amounts of impurities. For intermediate voltages, optimal
nanofibrils were achieved, though pivotal to this assembly is the wetting
behaviour upon tip immersion in the SWNT suspension drop. This process was
monitored in situ to correlate wetting angle and probe geometry (cone angles
and tip height), revealing that probes with narrow cone angles and long shanks
are optimal. It is proposed that this results from less wetting of the probe
apex, and therefore reduces capillary forces and especially force transients
during the nanofibril drawing process. Relatively rigid probes (force constant
>= 2 N/m) exhibited no perceivable cantilever bending upon wetting and
de-wetting, resulting in the most stable process control
Development of a dose distribution shifter to fit inside the collimator of a Boron Neutron Capture Therapy irradiation system to treat superficial tumours
The Kansai BNCT Medical Center has a cyclotron based epithermal neutron source for clinical Boron Neutron Capture Therapy. The system accelerates a proton to an energy of 30 MeV which strikes a beryllium target producing fast neutrons which are moderated down to epithermal neutrons for BNCT use. While clinical studies in the past have shown BNCT to be highly effective for malignant melanoma of the skin, to apply BNCT for superficial lesions using this system it is necessary to shift the thermal neutron distribution so that the maximum dose occurs near the surface. A dose distribution shifter was designed to fit inside the collimator to further moderate the neutrons to increase the surface dose and reduce the dose to the underlying normal tissue. Pure polyethylene was selected, and a Monte Carlo simulation was performed to determine the optimum thickness of the polyethylene slab. Compared with the original neutron beam, the shifter increased the thermal neutron flux at the skin by approximately 4 times. The measured and simulated central axis depth distribution and off axis distribution of the thermal neutron flux were found to be in good agreement. Compared with a 2 cm thick water equivalent bolus, a 26% increase in the thermal neutron flux at the surface was obtained, which would reduce the treatment time by approximately 29%. The DDS is a safe, simple and an effective tool for the treatment of superficial tumours for BNCT if an initially fast neutron beam requires moderation to maximise the thermal neutron flux at the tissue surface
AlN/AlGaN HEMTs on AlN substrate for stable high-temperature operation
We demonstrate an AlN/AlGaN high-electron-mobility transistor (HEMT) fabricated on a free-standing AlN substrate. A metal stack,
composed of Zr/Al/Mo/Au, was found to show low contact resistivity for source and drain ohmic contacts. The fabricated AlN/AlGaN HEMT
exhibited a maximum drain current of 38 mA/mm with a threshold voltage of -3.4 V. Negligible drain current degradation was observed at temperatures from 300 to 573 K, emonstrating that our AlN/AlGaN approach on an AlN substrate is promising for stable high-temperature operation
Dimension of the Torelli group for Out(F_n)
Let T_n be the kernel of the natural map from Out(F_n) to GL(n,Z). We use
combinatorial Morse theory to prove that T_n has an Eilenberg-MacLane space
which is (2n-4)-dimensional and that H_{2n-4}(T_n,Z) is not finitely generated
(n at least 3). In particular, this recovers the result of Krstic-McCool that
T_3 is not finitely presented. We also give a new proof of the fact, due to
Magnus, that T_n is finitely generated.Comment: 27 pages, 9 figure
- …