717 research outputs found
Seebeck power generation and Peltier cooling in a Normal metal-quantum dot-superconductor nanodevice
We theoretically investigate the Seebeck and Peltier effect across an
interacting quantum dot(QD) coupled between a normal metal and a
Bardeen-Cooper-Schrieffer superconductor within the Coulomb blockade regime.
Our results demonstrate that the thermoelectric conversion efficiency at
optimal power output (optimized with respect to QD energy level and external
serial load) in NQDS nanodevice can reach up to , where is
Carnot efficiency, with output power for temperature
below the superconducting transition temperature. Further, the Peltier cooling
effect is observed for a wide range of parameter regimes, which can be
optimized by varying the background thermal energy, QD level energy,
QD-reservoir tunneling strength, and bias voltage. The results presented in
this study are within the scope of existing experimental capabilities for
designing miniature hybrid devices that operate at cryogenic temperatures.Comment: 13 pages, 2 figure
A Strongly Correlated Quantum-Dot Heat Engine with Optimal Performance: An Non-equilibrium Green's function Approach
We present an analytical study of a strongly correlated quantum dot-based
thermoelectric particle-exchange heat engine for both finite and infinite
on-dot Coulomb interaction. Employing Keldysh's non-equilibrium Green's
function formalism for different decoupling schemes in the equation of motion,
we have analyzed the thermoelectric properties within the non-linear transport
regime. As the simplest mean-field approximation is insufficient for analyzing
thermoelectric properties in the Coulomb blockade regime, one needs to employ a
higher-order approximation to study strongly correlated QD-based heat engines.
Therefore initially, we have used the Hubbard-\Romannum{1} approximation to
study the quantum dot level position (), thermal gradient (), and on-dot Coulomb interaction () dependence of the thermoelectric
properties. Furthermore, as a natural extension, we have used an approximation
beyond Hubbard-\Romannum{1} in the infinite- limit (strong on-dot Coulomb
repulsion) to provide additional insight into the operation of a more practical
quantum dot heat engine. Within this infinite- limit, we examine the role of
the symmetric dot-reservoir tunneling () and external serial load
resistance () in optimizing the performance of the strongly correlated
quantum dot heat engine. Our infinite- results show a good quantitative
agreement with recent experimental data for a quantum dot coupled to two
metallic reservoirs.Comment: 14 pages 7 figure
Assessment Of Blood Pressure Regulatory Controls To Detect Hypovolemia And Orthostatic Intolerance
Regulation of blood pressure is vital for maintaining organ perfusion and homeostasis. A significant decline in arterial blood pressure could lead to fainting and hypovolemic shock. In contrast to young and healthy, people with impaired autonomic control due to aging or disease find regulating blood pressure rather demanding during orthostatic challenge. This thesis performed an assessment of blood pressure regulatory controls during orthostatic challenge via traditional as well as novel approaches with two distinct applications 1) to design a robust automated system for early identification of hypovolemia and 2) to assess orthostatic tolerance in humans. In chapter 3, moderate intensity hemorrhage was simulated via lower-body negative pressure (LBNP) with an aim to identify moderate intensity hemorrhage (-30 and -40 mmHg LBNP) from resting baseline. Utilizing features extracted from common vital sign monitors, a classification accuracy of 82% and 91% was achieved for differentiating -30 and -40 mmHg LBNP, respectively from baseline. In chapter 4, cause-and-effect relationship between the representative signals of the cardiovascular and postural systems to ascertain blood pressure homeostasis during standing was performed. The degree of causal interaction between the two systems, studied via convergent cross mapping (CCM), showcased the existence of a significant bi-directional interaction between the representative signals of two systems to regulate blood pressure. Therefore, the two systems should be accounted for jointly when addressing physiology behind fall. Further, in chapter 5, the potential of artificial gravity (2-g) induced via short-arm human centrifuge at feet towards evoking blood pressure regulatory controls analogous to standing was investigated. The observation of no difference in the blood pressure regulatory controls, during 2-g centrifugation compared to standing, strongly supported the hypothesis of artificial hypergravity for mitigating cardiovascular deconditioning, hence minimizing post-flight orthostatic intolerance
Mean-Field Study of Normal Metal-Quantum Dot-Superconductor System in the Presence of External Magnetic Field
In this paper, we have analyzed the spectral and transport properties of a
weakly correlated single-level quantum dot hybridized with one normal
conducting and another Bardeen-Cooper-Schrieffer (BCS) superconducting lead
(N-QD-S system) in the presence of an external magnetic field. We have employed
Green's function equation of motion (EOM) approach within a self-consistent
Hartree-Fock (HF) mean-field approximation to analyze the Hamiltonian. We
studied the effect of on-dot Coulomb correlation and an external magnetic field
on the sub-gap Andreev levels of a quantum dot, strongly coupled to a
conventional s-wave superconductor as a function of impurity parameters. We
have shown that for a finite magnetic field, the Andreev bound states (ABSs)
split into a spin-up and spin-down contribution (i.e. Zeeman splitting) and
cross the Fermi energy level, resulting in a quantum phase transition, which is
an indication of a change in the fermion parity of the ground state. Further,
within the non-linear regime, we discuss the total electrical conductance for
various values of Zeeman energy and on-dot Coulomb interactions. We have
compared our results with the existing experimental and theoretical results.Comment: 7 pages, 5 figure
Performance assessment of wheat genotypes based on the superiority index using additive main and multiplicative interaction effects and BLUP analysis
The simultaneous use of additive main and multiplicative interaction effects (AMMI) and best linear unbiased predictors (BLUP) has been reflected in the multi-location evaluation of trials for number of crops. The additional advantages of both these approaches would be combined in superiority index (SI) to have an edge over the commonly used approaches. The promising wheat genotypes had been considered under multi location trails in Peninsular zone of India during the cropping seasons of 2018-2019 and 2019-2020. The highly significant environmental effects contributed 44.1% & 35.3% of total sum of squares in the AMMI analysis, 20.6% & 26.2% were augmented by G × E interaction, while 10.8% & 7.5% were contributed by the genotypes.Wheat genotypes of UAS3001, MACS6222, GW322, and DDW48 expressed their superiority in BLUP values. Superiority indexes and adaptability measures had identified WHD964 and DDW48 genotypes for the second year of study. More than 75% variations among the considered measures were due to the first two interaction principal components (IPCA’s) under Biplot analysis. Number of superiority index measures were clustered with adaptability measures in the same quadrant. Superiority index, the weighted measure of yield and consistent performance of genotypes would be more appropriate for stability and adaptabilities studies
Wheat genotypes as assessed by Additive main & multiplicative interactions (AMMI) and Best linear unbiased prediction (BLUP) for stability analysis under rainfed timely sown trials in Northern Hills Zone of India
Stability analysis of wheat genotypes under rainfed timely sown trials in Northern Hills Zone of India by Additive main & multiplicative interactions (AMMI) analysis observed highly significant effects of the environment, GxE interaction and genotypes during 2018-19 and 2019-20. The ranking of genotypes had altered with utilization of more number of IPCA’s in AMMI and WAASB measures. Environments contributed about 53%, GxE interaction accounted for 30.5% and Genotypes explained only 5.4% of the total sum of squares due to treatments in the first year. Wheat genotypes HS668, VL2035, VL2036 , HS562 had been selected by Analytic measures of adaptability and Superiority indexes. Different quadrants comprised of a cluster of arithmetic, geometric, harmonic means along with corresponding adaptability measures. Superiority Indexes considering averages grouped separately. This group maintained the right angles with a group of MASV & MASV1 measures. Clustering of Adaptability measures as per arithmetic, geometric and harmonic means placed in a quadrant. Second-year reflected VL2041, HS675, HS676 & HS562, HPW471 genotypes selected by adaptability and superiority indexes. About 68% of the total variation with 38.4% and 30.2% contributions by PC1 & PC2. Adaptability measures maintained the right angle with other stability measures, with the exception of Superiority indexes. There is an additional advantage with these measures to assign variable weights to the yield and stability as per the goal of breeding trials. These indexes have the potential to provide reliable estimates of genotypes in future studies as they are considered more number of significant IPCA’s in biplots
Simultaneous application of AMMI measures and yield for stability analysis of wheat genotypes evaluated under irrigated late sown conditions of Central Zone of India
Reports on biased interpretation for the stability of the genotypes under AMMI analysis, considering only the first two interaction principal components, has been observed in recent past. Simultaneous use of yield and stability of genotypes in a single measure had been advocated for identification of highly productive and broadly adapted genotypes. The performance of superiority index, allowed variable weighting mechanism for yield and stability, has been compared with AMMI based measures. For the first year (2018-19) Superiority index, weighting 0.65 and 0.35 for yield and stability, found UAS3002, MP3336 and HI1633 as of stable performance with high yield. Recent analytic measures the relative proportion of genotypic value (PRVG) and Harmonic mean of the relative proportion of genotypic value (MHPRVG) selected CG1029, HI1634 and HD2932 wheat genotypes. Indirect relations were expressed by Superiority Index (SI) with other stability measures. Superiority index saw stable performance along with high yield of HD2864 and HI1634 for the second year 2019-20. PRVG as well as MHPRVG measures observed suitability of CG1029 and HD2864 while MP3336 as unstable wheat genotypes. Values of SI measure had expressed only indirect relations of high degree with stability measures except with yield, PRVG and MHPRVG values. Stability measures by the simultaneous use of AMMI and yield would be more meaning full and useful as compared to measures consider either the AMMI or yield of genotypes only
- …