Effect of Different Thicknesses of Pressable Ceramic Veneers on Polymerization of Light-cured and Dual-cured Resin Cements

Aim: This study evaluated the effects of ceramic veneer thicknesses on the polymerization of two different resin cements. Materials and methods: A total of 80 ceramic veneer disks were fabricated by using a pressable ceramic material (e.max Press; Ivoclar Vivadent) from a Low Translucency (LT) ingot (A1 shade). These disks were divided into light-cured (LC; NX3 Nexus LC; Kerr) and dual-cured (DC; NX3 Nexus DC; Kerr) and each group was further divided into four subgroups, based on ceramic disk thickness (0.3, 0.6, 0.9, and 1.2 mm). The values of Vickers microhardness (MH) and degree of conversion (DOC) were obtained for each specimen after a 24-hour storage period. Association between ceramic thickness, resin cement type, and light intensity readings (mW/cm2) with respect to microhardness and degree of conversion was statistically evaluated by using analysis of variance (ANOVA). Results: For the DOC values, there was no significant difference observed among the LC resin cement subgroups, except in the 1.2 mm subgroup; only the DOC value (14.0 ± 7.4%) of 1.2 mm DC resin cement had significantly difference from that value (28.9 ± 7.5%) of 1.2 mm LC resin cement (p \u3c 0.05). For the MH values between LC and DC resin cement groups, there was statistically significant difference (p \u3c 0.05); overall, the MH values of LC resin cement groups demonstrated higher values than DC resin cement groups. On the other hands, among the DC resin cement subgroups, the MH values of 1.2 mm DC subgroup was significantly lower than the 0.3 mm and 0.6 mm subgroups (p \u3c 0.05). However, among the LC subgroups, there was no statistically significant difference among them (p \u3e 0.05). Conclusion: The degree of conversion and hardness of the resin cement was unaffected with veneering thicknesses between 0.3 and 0.9 mm. However, the DC resin cement group resulted in a significantly lower DOC and MH values for the 1.2 mm subgroup. Clinical Significance: While clinically adequate polymerization of LC resin cement can be achieved with a maximum 1.2 mm of porcelain veneer restoration, the increase of curing time or light intensity is clinically needed for DC resin cements at the thickness of more than 0.9 mm

Die Spacer Thickness Reproduction for Central Incisor Crown Fabrication with Combined Computer-aided Design and 3D Printing Technology: An in vitro Study

Statement of problem The inability to control die spacer thickness has been reported. However, little information is available on the congruency between the computer-aided design parameters for die spacer thickness and the actual printout. Purpose The purpose of this study was to evaluate the accuracy and precision of the die spacer thickness achieved by combining computer-aided design and 3-dimensional printing technology. Material and Methods An ivorine maxillary central incisor was prepared for a ceramic crown. The prepared tooth was duplicated by using polyvinyl siloxane duplicating silicone, and 80 die-stone models were produced from Type IV dental stone. The dies were randomly divided into 5 groups with assigned die spacer thicknesses of 25 μm, 45 μm, 65 μm, 85 μm, and 105 μm (n=16). The printed resin copings, obtained from a printer (ProJet DP 3000; 3D Systems), were cemented onto their respective die-stone models with self-adhesive resin cement and stored at room temperature until sectioning into halves in a buccolingual direction. The internal gap was measured at 5 defined locations per side of the sectioned die. Images of the printed resin coping/die-stone model internal gap dimensions were obtained with an inverted bright field metallurgical microscope at ×100 magnification. The acquired digital image was calibrated, and measurements were made using image analysis software. Mixed models (α=.05) were used to evaluate accuracy. A false discovery rate at 5% was used to adjust for multiple testing. Coefficient of variation was used to determine the precision for each group and was evaluated statistically with the Wald test (α=.05). Results The accuracy, expressed in terms of the mean differences between the prescribed die spacer thickness and the measured internal gap (standard deviation), was 50 μm (11) for the 25 μm group simulated die spacer thickness, 30 μm (10) for the 45 μm group, 15 μm (14) for the 65 μm group, 3 μm (23) for the 85 μm group, and -10 μm (32) for the 105 μm group. The precision mean of the measurements, expressed as a coefficient of variation, ranged between 14% and 33% for the 5 groups. Conclusions For the accuracy evaluation, statistically significant differences were found for all the groups, except the group of 85 μm. For the precision assessment, the coefficient of variation was above 10% for all groups, showing the printer’s inability to reproduce the uniform internal gap within the same group

A Methodology for Three-Dimensional Quantification of Anterior Tooth Width

The use of cone-beam computed tomography (CBCT) technology has been shown to be more accurate in measuring individual incisor tooth widths than the use of wax exemplars. There were fewer differences by investigators using CBCT than others using an F-test in a mixed model of the measurement differences of investigators, wax type, and which tooth was measured. In addition, the frequency of outliers was less in the CBCT method (a total of 5) as compared to the two-dimensional measurements in ether Aluwax (a total of 8) or Coprwax (a total of 12). Both results indicate that CBCT measurements accounted more precisely for tooth width and level of eruption

Replication of Known Dental Characteristics in Porcine Skin: Emerging Technologies for the Imaging Specialist

This study demonstrates that it is sometimes possible to replicate patterns of human teeth in pig skin and determine scientifically that a given injury pattern (bite mark) correlates with the dentitions of a very small proportion of a population dataset, e.g., 5 percent or even 1 percent. The authors recommend building on the template of this research with a sufficiently large database of samples that reflects the diverse world population. They also envision the development of a sophisticated imaging software application that enables forensic examiners to insert parameters for measurement, as well as additional methods of applying force to produce bite marks for research. The authors further advise that this project is applied science for injury pattern analysis and is only foundational research that should not be cited in testimony and judicial procedures. It supplements but does not contradict current guidelines of the American Board of Forensic Odontology regarding bite mark analysis and comparisons. A much larger population database must be developed. The project’s methodology is described in detail, accompanied by 11 tables and 41 figures

Anarchy and Leptogenesis

We study if leptogenesis works successfully together with the neutrino mass anarchy hypothesis. We find that the predicted neutrino mass spectrum is sensitive to the reheating temperature or the inflaton mass, while the distributions of the neutrino mixing angles and CP violation phases remain intact as determined by the invariant Haar measure of U(3). In the case of thermal leptogenesis, the light neutrino mass distribution agrees well with the observations if the reheating temperature is O(10^{9-11}) GeV. The mass spectrum of the right-handed neutrinos and the neutrino Yukawa matrix exhibit a certain pattern, as a result of the competition between random matrices with elements of order unity and the wash-out effect. Non-thermal leptogenesis is consistent with observation only if the inflaton mass is larger than or comparable to the typical right-handed neutrino mass scale. Cosmological implications are discussed in connection with the 125GeV Higgs boson mass.Comment: 29 pages, 6 figures. v2: figures and references added. v3: published in JHE

Allogeneic Hematopoietic Cell Transplantation Provides Effective Salvage Despite Refractory Disease or Failed Prior Autologous Transplant in Angioimmunoblastic T-Cell Lymphoma: A CIBMTR Analysis

Background: There is a paucity of data on the role of allogeneic hematopoietic cell transplantation (allo-HCT) in patients with angioimmunoblastic T-cell lymphoma (AITL). Using the CIBMTR registry, we report here the outcomes of AITL patients undergoing an allo-HCT. Methods: We evaluated 249 adult AITL patients who received their first allo-HCT during 2000–2016. Results: The median patient age was 56 years (range = 21–77). Majority of the patients were Caucasians (86%), with a male predominance (60%). Graft-versus-host disease (GVHD) prophylaxis was predominantly calcineurin inhibitor-based approaches while the most common graft source was peripheral blood (97%). Median follow-up of survivors was 49 months (range = 4–170 months). The cumulative incidence of grade 2–4 and grade 3–4 acute GVHD at day 180 were 36% (95% CI = 30–42) and 12 (95% CI = 8–17), respectively. The cumulative incidence of chronic GVHD at 1 year was 49% (95%CI 43–56). The 1-year non-relapse mortality (NRM) was 19% (95% CI = 14–24), while the 4-year relapse/progression, progression-free survival (PFS), and overall survival (OS) were 21% (95% CI = 16–27), 49% (95% CI = 42–56), and 56% (95% CI = 49–63), respectively. On multivariate analysis, chemoresistant status at the time of allo-HCT was associated with a significantly higher risk for therapy failure (inverse of PFS) (RR = 1.73 95% CI = 1.08–2.77), while KPS \u3c 90% was associated with a significantly higher risk of mortality (inverse of OS) (RR = 3.46 95% CI = 1.75–6.87). Conclusion: Our analysis shows that allo-HCT provides durable disease control even in AITL patients who failed a prior auto-HCT and in those subjects with refractory disease at the time of allografting

Allogeneic transplantation provides durable remission in a subset of DLBCL patients relapsing after autologous transplantation

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/133605/1/bjh14046.pdfhttp://deepblue.lib.umich.edu/bitstream/2027.42/133605/2/bjh14046_am.pd

Allogeneic hematopoietic cell transplantation provides effective salvage despite refractory disease or failed prior autologous transplant in angioimmunoblastic T-cell lymphoma: a CIBMTR analysis

Abstract Background There is a paucity of data on the role of allogeneic hematopoietic cell transplantation (allo-HCT) in patients with angioimmunoblastic T-cell lymphoma (AITL). Using the CIBMTR registry, we report here the outcomes of AITL patients undergoing an allo-HCT. Methods We evaluated 249 adult AITL patients who received their first allo-HCT during 2000–2016. Results The median patient age was 56 years (range = 21–77). Majority of the patients were Caucasians (86%), with a male predominance (60%). Graft-versus-host disease (GVHD) prophylaxis was predominantly calcineurin inhibitor-based approaches while the most common graft source was peripheral blood (97%). Median follow-up of survivors was 49 months (range = 4–170 months). The cumulative incidence of grade 2–4 and grade 3–4 acute GVHD at day 180 were 36% (95% CI = 30–42) and 12 (95% CI = 8–17), respectively. The cumulative incidence of chronic GVHD at 1 year was 49% (95%CI 43–56). The 1-year non-relapse mortality (NRM) was 19% (95% CI = 14–24), while the 4-year relapse/progression, progression-free survival (PFS), and overall survival (OS) were 21% (95% CI = 16–27), 49% (95% CI = 42–56), and 56% (95% CI = 49–63), respectively. On multivariate analysis, chemoresistant status at the time of allo-HCT was associated with a significantly higher risk for therapy failure (inverse of PFS) (RR = 1.73 95% CI = 1.08–2.77), while KPS < 90% was associated with a significantly higher risk of mortality (inverse of OS) (RR = 3.46 95% CI = 1.75–6.87). Conclusion Our analysis shows that allo-HCT provides durable disease control even in AITL patients who failed a prior auto-HCT and in those subjects with refractory disease at the time of allografting.https://deepblue.lib.umich.edu/bitstream/2027.42/146782/1/13045_2018_Article_696.pd

Allogeneic haematopoietic cell transplantation for extranodal natural killer/Tâ cell lymphoma, nasal type: a CIBMTR analysis

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/146342/1/bjh14879.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/146342/2/bjh14879_am.pd

Myeloablative vs Reduced-Intensity Conditioning Allogeneic Hematopoietic Cell Transplantation for Chronic Myeloid Leukemia

Allogeneic hematopoietic cell transplantation (allo-HCT) is a potentially curative treatment of chronic myeloid leukemia (CML). Optimal conditioning intensity for allo-HCT for CML in the era of tyrosine kinase inhibitors (TKIs) is unknown. Using the Center for International Blood and Marrow Transplant Research database, we sought to determine whether reduced-intensity/nonmyeloablative conditioning (RIC) allo-HCT and myeloablative conditioning (MAC) result in similar outcomes in CML patients. We evaluated 1395 CML allo-HCT recipients between the ages of 18 and 60 years. The disease status at transplant was divided into the following categories: chronic phase 1, chronic phase 2 or greater, and accelerated phase. Patients in blast phase at transplant and alternative donor transplants were excluded. The primary outcome was overall survival (OS) after allo-HCT. MAC (n = 1204) and RIC allo-HCT recipients (n = 191) from 2007 to 2014 were included. Patient, disease, and transplantation characteristics were similar, with a few exceptions. Multivariable analysis showed no significant difference in OS between MAC and RIC groups. In addition, leukemia-free survival and nonrelapse mortality did not differ significantly between the 2 groups. Compared with MAC, the RIC group had a higher risk of early relapse after allo-HCT (hazard ratio [HR], 1.85; P = .001). The cumulative incidence of chronic graft-versus-host disease (cGVHD) was lower with RIC than with MAC (HR, 0.77; P = .02). RIC provides similar survival and lower cGVHD compared with MAC and therefore may be a reasonable alternative to MAC for CML patients in the TKI era