Influence of Different Polymeric Matrices on the Properties of Pentaerythritol Tetranitrate

Six different polymeric matrices were fabricated to reduce the sensitivity of PETN (Pentaerythritol tetranitrate). The polymeric matrices used were individually based on Acrylonitrile butadiene rubber (NBR) softened by plasticizer, styrene-butadiene rubber (SBR) softened by oil, polymethyl methacrylate (PMMA) plasticised by dioctyl adipate (DOA), polydimethylsiloxane (PDMS), polyurethane matrix, and Fluorel binder. A computerised plastograph mixer was utilised for producing three polymer-bonded explosives (PETN-NBR, PETN-SBR, and PETN-PDMS) based on the non-aqueous method. A cast-cured method was used to prepare PBX based on polyurethane (PETN-HTPB), while the slurry technique was used to prepare beads of PETN coated by either fluorel binder (PETN-FL) or based on PMMA forming (PETN-PMMA). The heat of combustion and sensitivities were investigated. The velocity of detonation was measured, while the characteristics of the detonation wave were deduced theoretically by the EXPLO 5 (thermodynamic code). The ballistic mortar experiment was performed to determine the explosive strength. By comparing the results, it was found that PDMS has the highest influence on decreasing the impact sensitivity of PETN, while the cast cured PETN-HTPB has the lowest friction sensitivity. On the other side, PETN-FL has the highest detonation parameters with high impact sensitivity. Several relationships were verified and the matching between the measured results with the calculated ones was confirmed

Optimizing the Dynamic Performance of a Wind Driven Standalone DFIG Using an Advanced Control Algorithm

The article seeks to improve the dynamic performance of a standalone doubly fed induction generator (DFIG) which driven by a wind turbine, with the help of an effective control approach. The superiority of the designed predictive controller can be confirmed through evaluating the performance of the DFIG under other control algorithm, which is the model predictive direct torque control (MPDTC), model predictive current control (MPCC) as classic types of control. Firstly, the operating principles of the two controllers are described in details. After that, a comprehensive comparison is performed among the dynamic performances of the designed MPDTC, MPCC techniques and the predictive control strategy, so we can easily present the merits and deficiencies of each control scheme to be able to easily select the most appropriate algorithm to be utilized with the DFIG. The comparison is carried out in terms of system simplicity, dynamic response, ripples’ content, number of performed commutations and total harmonic distortion (THD). The results of the comparison prove the effectiveness and validation of our proposed predictive controller; as it achieves the system simplicity, its dynamic response is faster than that of MPDTC and MPCC, it presents a lower content of ripples compared to MPDTC and MPCC. Moreover, it can minimize the computational burden, remarkably. Furthermore, the numerical results are showing a marked reduction in the THD with a percentage of 2.23 % compared to MPDTC and 1.8 % compared to MPCC. For these reasons, it can be said that the formulated controller is the most convenient to be used with the DFIG to achieve the best dynamic performance

Induciranje pluripotentnih matičnih stanica upotrebom mRNA: učinak valproične kiseline, 5-azacitidina i askorbinske kiseline

In the bourgeoning fields of tissue engineering and regenerative medicine, induced pluripotent stem cells (iPSCs) technology with gene therapy are promising candidates for alternative stem cell source and cell transplantation. In this study, small molecules as anti-oxidant; ascorbic acid (ASA), histone deacetylase inhibitors (HDACi); Valproic acid (VPA), and DNA methyltransferase inhibitors (DNMTi); 5-Azacytidine (5-AzaC) were examined during the generation of murine iPSCs using mRNA of Yamanaka factors from mouse embryonic fibroblasts (MEFs). These modulators were selected based on their well-known effect on the epigenetic status and chromatin modification during early reprogramming. iPSC generation was performed by using synthesized mRNAs of Yamanaka factors Oct4, Sox2, c-Myc, and Klf4 (OSCK) as a standard reprogramming strategy. Both morphological changes and the expression level of the pluripotency markers were examined. 5-AzaC with 1 μM concentration has a slightly toxic effect on the cells, affecting its proliferation and growing efficiency. In contrast, the use of VPA or ASA led to a two-fold increase in the number of iPSC colonies. The iPSCs cultured with the addition of VPA or ASA showed a high expression of the tested pluripotency markers, with a significant increase, more than that of the cells cultured with the addition of 5-AzaC. These findings shed light on the role of ASA, VPA, and 5-AzaC during murine iPSCs generation using a mRNA reprogramming strategy.Ubrzani razvoj u područjima tkivnog inženjerstva i regenerativne medicine, potaknuo je tehnologiju pluripotentnih matičnih stanica (iPSCs) koja zajedno s genskom terapijom predstavlja obečavajući izvor matičnih odnosno transplantacijskih stanica. U ovom su radu, za vrijeme stvaranja mišjih iPSC-a upotrebom mRNA Yamanaka faktora od mišjih embrionalnih fibroblasta (MEF), istraženi učinci različitih modulatora: malih molekula kao antioksidansa, askorbinske kiseline (ASA), inhibitora histonske deacetilaze (HDACi), valproične kiseline (VPA), inhibitora DNA metiltransferaze (DNMTi) i 5-azacitidina (5-AzaC). Ovi su modulatori odabrani zbog njihova dobro poznatog učinka na epigenetski status i modifikaciju kromatina za vrijeme ranog reprogramiranja. Stvaranje iPSC-a postignuto je upotrebom sintetiziranih mRNA Yamanaka faktora Oct4, Sox2, c-Myc i Klf4 (OSCK). Istražene su i morfološke promjene i razina ekspresije markera pluripotencije. 5-AzaC s koncentracijom od 1 μM imao je mali toksičan učinak na stanice, utječući na proliferaciju i njihov rast. Nasuprot tome, upotreba VPA-a ili ASA-e dovela je do dvostrukog povećanja broja iPSC kolonija. iPSC kultura s dodatkom VPA-a ili ASA-e pokazala je visoku ekspresiju testiranih markera pluripotencije, sa znakovitim višom razinom u odnosu na stanice kojima je dodan 5-AzaC. Ovi rezultati rasvjetljuju ulogu ASA-e, VPA-a i 5-AzaC-a za vrijeme stvaranja mišjih iPSC-a primjenom strategije reprogramiranja mRNA

Synthesis of Mesoporous TiO2 Template-Free and Photocatalytic Activity for Azo Dye Degradation

Nanoporous titanium dioxide was prepared by sol-gel technique. To control the surface area, pore size and pore volume of the prepared TiO2, a catalyzed hydrolysis was carried out using different concentrations of silicotungstic acid (SWA) as a template. A fixed molar ratio of H2O/Ti was used. The prepared TiO2 was calcined at 400 or 600oC. Samples were characterized by nitrogen physic-sorption, X-ray powder diffraction (XRD), selected scattered electron diffraction, Raman spectroscopic analysis, Fourier Transform spectroscopy (FTIR), Thermo gravimetric analysis (TGA), Differential scanning calorimetry (DSC), scanning and transmission electron microscopy (SEM and TEM). The photocatalytic activity of the prepared samples was evaluated by the degradation of alizarin yellow under UV light. The results showed that the crystallinity increases as the concentration of SWA decreases. The presence of SWA during the precipitation of TiO2 prevents the formation of rutile phase and suppresses the crystal growth. The results showed also that the surface area increases as the concentration of SWA decreases. The samples prepared using 0.05M SWA and calcined at 600 oC showed a higher activity. Keywords: mesoporous TiO2, photocatalytic degradation, alizarin yellow, azodye

Sol–Gel and Thermally Evaporated Nanostructured Thin ZnO Films for Photocatalytic Degradation of Trichlorophenol

In the present work, thermal evaporation and sol–gel coating techniques were applied to fabricate nanostructured thin ZnO films. The phase structure and surface morphology of the obtained films were investigated by X-ray diffractometer (XRD) and scanning electron microscope (SEM), respectively. The topography and 2D profile of the thin ZnO films prepared by both techniques were studied by optical profiler. The results revealed that the thermally evaporated thin film has a comparatively smoother surface of hexagonal wurtzite structure with grain size 12 nm and 51 m2/g. On the other hand, sol–gel films exhibited rough surface with a strong preferred orientation of 25 nm grain size and 27 m2/g surface area. Following deposition process, the obtained films were applied for the photodegradation of 2,4,6-trichlorophenol (TCP) in water in presence of UV irradiation. The concentrations of TCP and its intermediates produced in the solution during the photodegradation were determined by high performance liquid chromatography (HPLC) at defined irradiation times. Complete decay of TCP and its intermediates was observed after 60 min when the thermal evaporated photocatalyst was applied. However, by operating sol–gel catalyst, the concentration of intermediates initially increased and then remained constant with irradiation time. Although the degradation of TCP followed first-order kinetic for both catalysts, higher photocatalytic activity was exhibited by the thermally evaporated ZnO thin film in comparison with sol–gel one

Association between aortic sclerosis and coronary artery disease

Background: Although there is a recognized link between cardiovascular hazards and coronary artery disease (CAD), it is still unknown whether aortic sclerosis and CAD are linked.Objective: This study aimed to check whether if there is a link between aortic sclerosis and the existence and severity of coronary artery disease .Patients and methods: 204 individuals were enrolled in the study, transthoracic echocardiographic, and coronary angiography were done. Aortic leaflets were tested for the amount of thickness in the short axis view. The involvement of coronary arteries represented by the gensini score and the association between aortic valve sclerosis score and the degree and severity of coronary affection was investigated using the Gensini score.Results: The individuals were divided into 2 groups grounded on the severity of aortic valve sclerosis. Group A (GP A) included patients with aortic valve sclerosis (AVS) ≥ 2 and group B (GP B) included patients with AVS < 2. In GP A, the right coronary cusp was the most afflicted one, whereas the LAD was the most affected in coronaries. The degree and severity of CAD were more significant in GP A, as evidenced by a higher Gensini score value of 39.27 versus 28.84 in GP B.Conclusion: AVS has been found to be correlated with the presence and severity of CAD and could be used as a potential surrogate marker for the illness

Saline infusion sonohysterography for uterine cavity evaluation in women with abnormal uterine bleeding

Background: The aim of this study was to compare the diagnostic effectiveness of saline infusion sonohysterography (SIS) with hysteroscopy, as a gold standard diagnostic method, in detecting endometrial pathology in premenopausal women with abnormal uterine bleeding.Methods: A prospective study was conducted at Al-Azhar University hospital, Assiut, Egypt. Fifty patients were recruited from the gynecological outpatient clinic complaining of abnormal uterine bleeding. They were evaluated by SIS and compared with hysteroscopic examination for each.Results: The mean age of patients was 45.56±3.48 years. All the intracavitary lesions; endometrial polyps, submucous fibroids and hyperplastic endometrium were equally detected by both methods. Diagnostic accuracy of SIS in comparison with hysteroscopy was 76% with sensitivity 80%, specificity 72%.Conclusions: SIS is a reliable and accurate method for evaluation of the uterine cavity. It can be a good alternative technique for the evaluation of uterine cavity abnormalities where hysteroscopy is not available

Doctor-Patient Communication A Requisite for Better Medication History Taking: Insight from Sudan

Despite the awareness of doctors about the significance of obtaining a comprehensive medication history for patients, they often neglect this in their practice, resulting in an incomplete patient medication list. The study aimed to investigate the role of communication skills as a crucial part of optimal pharmacotherapy. An observational, cross-sectional study was carried out at internal medicine department in a tertiary hospital, Wad Medani, Sudan.  The research instrument was a form involved a checklist rating a doctor’s performance during the medical encounters. Among 94 medical doctors, 51% were males and 6.15 (SE) was the average years of experience. About 13% of participants received under-graduation training in communication skills, while 21% had it after post-graduation. Concerning communication skills evaluation, 61% of specialists, 29% of registrars, and 7% of house officers reported an excellent performance. Gender and doctors’ ranking in a medical team had a significant role in communication skills (P-value <0.05) with an overall adjusted R2 of 0.339. Specialists were the most knowledgeable and skillful in obtaining structured medication history; 67% reported an excellent performance. Communication skills had a remarkable impact in getting patient medication history (P-value: <0.05) with an overall adjusted R2 of 0. 763.The study concluded that; gender and doctors’ ranking in the medical team were the main predictors for doctors to be a good communicator. Communication skills have a significant role in medication history taking. There was a gap in knowledge and training in communication skills among internal medicine doctors specifically, “house officers.” This gap negatively contributed to obtaining a comprehensive patient medication history