40 research outputs found
Recommended from our members
Compact wideband patch antenna for 5 and 6 GHz WLAN applications
Copyright @ 2008 IEICEA wideband rectangular and circular mistostrip patch antenna for 5 and 6 GHz WLAN applications is presented. The rectangular and the circular patches are fed by microstrip line. All the structure is
placed on the same layer with a very simple structure. The impedance bandwidth for the antenna presented 22.41 % ranging from 5.15 GHz to 6.45 GHz. The radiation pattern including E-plane and H-plane is satisfactory within this bandwidth
Recommended from our members
Tunable multiband microstrip antenna for 5GHz WLAN
Copyright @ 2013. Ali Ejaz, R. Nilavalan & Hattan Abutarboush. This is a research/review paper, distributed under the terms of the
Creative Commons Attribution-Noncommercial 3.0 Unported License http://creativecommons.org/licenses/by-nc/3.0/), permitting
all non commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.In
this paper, a tunable Multiband Micro strip Antenna is designed, capable of tuning its
operating frequency in 5GHz band independently. Two slots of E & U shape are etched to
achieve multiband resonance. Two capacitors of fixed value and a varactor diode are used to
achieve tuning. Proposed antenna targets the 5GHz WLAN bands; UNII-1 and UNII-2. Simulated
and measured results are in good agreement
Recommended from our members
Multi-band antenna for different wireless applications
A small multi-band compact antenna is presented. The antenna is designed on Roger RT/duroid 5880 with dielectric constant 2.2, multi-band operations is achieved by inserting a slot on the top patch. The antenna has wide impedance bandwidth at 1.2, 1.6, 2.4 and 2.6 GHz with Gain 4.2, 1, 5 and 2 dBi respectively. The bandwidth before adding the shorting wall and the slot was 3.72%, whereas after adding the shorting wall and the slot the bandwidth get wider to 31.9% at the centre of 1.4 GHz. The radiation pattern has acceptable response with low cross polarization at both E-plane and H-plane. The overall dimension of the ground plane is 70 X 70 X 1.5 m
Bandwidth enhancement for patch antenna using PBG slot structure for 5, 6 and 9 GHz applications
A design strategy using photonic band gap (PBG) structure on ground plane to achieve wider bandwidth for patch antenna is presented. It is found that, the impedance bandwidth has improved from 3.72% to 31.9% at centre frequency 9 GHz after adding PBG on the ground plane. The antenna has multi band operations at 5, 6 and 9 GHz. E-Plane and H-plane radiation patter is satisfied within this bands
Bandwidth enhancement for microstrip patch antenna using stacked patch and slot
Small size wideband microstrip patch antenna with slot in ground plane and stacked patch fed through microstrip line is presented. By inserting slot on ground plane and stacked patch supported by wall, the bandwidth can improve up to 25% without significant change in the frequency. The bandwidth before adding the slot and the stacked patch was 3.72%, whereas after adding the slot and the stacked patch the bandwidth increased up to 25% ranging from 2.45 to 3.3 GHz. The radiation pattern has acceptable response at both E-plane and H-plane. The ground plane size is 30 mm by 90 mm, the antenna designed is based on Roger RT/duroid 5880 with dielectric constant 2.
Recommended from our members
Triple band double U-slots patch antenna for WiMAX mobile applications
A small triple-band 2.7 GHz, 3.2 GHz and 5.3 GHz compact microstrip patch antenna with two U-shaped slots and a small ground plane is presented. It has been developed to be used in future WiMAX technology. The required bandwidths are fulfilled the WiMAX technology 4.8 %, 3 % and 2.5 % respectively. The return loss for the triple band are -18.5 dB, -14.5 dB and -19 respectively
Bandwidth enhancement for small patch antenna using PBG structure for different wireless applications
A design strategy using Photonic Band Gap (PBG) structure on ground plane to achieve wider bandwidth for patch antenna is presented. It is found that, the impedance bandwidth has improved from 3.72% to 31.9% at centre frequency 9 GHz after adding PBG on the ground plane. The antenna has multi band operations at 5, 6 and 9 GHz. E-Plane and H-plane radiation patter is satisfied within this band
Wideband slotted patch antennas using EBG structures
Copyright @ 2010 IEEEA slotted microstrip patch antenna is designed with Electromagnetic Band gap (EBG) structures. The performance parameters of the presented antenna are then compared with the conventional patch antenna. It is realized that there is a significant increase of bandwidth and better suppression of harmonics than the normal patch antenna. This antenna is thus operating in the frequency band 5 - 6 GHz which is one of the most usable bandwidth regions for wireless applications such as WiMAX, WiFi outdoor, WLAN, Hiperlan/2 and many more. The proposed antenna achieves a gain between 4 to 6 dBi built in FR-4 material
Recommended from our members
Design and Measurements of a Five Independent Band Patch Antenna for Different Wireless Applications
This paper presents the design of a compact microstrip patch antenna with the ability of controlling the number of bands and the operating frequencies independently. Numerical equations are derived using a curve fitting technique to obtain the centre frequency of each band. The antenna comprises a main patch and four sub-patches fed by a 50 microstrip line. It is designed to generate up to five separate modes to cover the frequency range from 900MHz to 3GHz for the operation of wireless devices supporting multiple standards including Global System for Mobile communication (GSM900, 880-960 MHz), Digital Communication System (DCS1800, 1710-1880 MHz), Universal Mobile Telecommunication System (UMTS, 1920-2170 MHz), Wireless Local Area Network (WLAN, 2400-2483.5 MHz) and low band Worldwide Interoperability for Microwave Access (WIMAX, 2.5 to 2.8 GHz).NPL SMART chamber were supported by the Measurements for Innovators (MFI) program and the National Measurement Office, an Executive Agency of the Department for Business, Innovation and Skill
Recommended from our members
Wide-band planar inverted-F antenna for cognitive radio
A wide-band Planar Inverted-F Antenna (PIFA) is presented. The proposed antenna is simply structured consist of main patch supported by shorting wall and shorting pin, fed by 50 ohm microstrip transmission line. The antenna achieves an enhanced impedance bandwidth of 64.5 % covering from 2.1 to 4.1GHz with a stable radiation performance in terms of gain from 6 - 8 dBi. The radiated patch occupied a total volume of 53 x 55 mm. The antenna was studied by means of numerical simulation; the achieved -10 dB bandwidth of the antenna is confirmed and demonstrated by experimental measurements. The simulated and measured results are in good agreements