ZnO-Loaded SA-g-Poly (AC-co-EBS) Hydrogel Nanocomposite as an Efficient Adsorption of Tetracycline and Phenol: Kinetics and Thermodynamic Models

A synthetic superabsorbent polymer hydrogel nanocomposite was prepared by the free radical graft co-polymerization method. This study included the preparation of two surfaces: first sodium alginate-g-(acrylic acid-co-sodium; 4-ethenylbenzenesulfonate), SA-g-poly (Ac-co-EBS) hydrogel, and second surface hydrogel after zinc oxide loading SA-g-poly (Ac-co-EBS). Hydrogel nanocomposite was prepared from different monomers for the removal of pollutants. The physical characterizations of nanocomposite have been studied using several techniques like UV-vis, FTIR, FE-SEM, TEM, EDX, and XRD. The data from the adsorption study show that E% increases with increasing contact time, with the best agitation time of 1 h, after which the adsorption becomes constant. The increase in adsorbent amount 0.01–0.1 g, the percentage removal of tetracycline (TC) and phenol (PH) increased from 60.639–97.085 and 487.71–94.05%, respectively, and Qe decreased 606.39–97.08 to 487.1831–94.456 mg/g on hydrogel. The ∆H value is endothermic. All processes of adsorption are considered spontaneous, from a negative value of ∆G to a positive value of ∆S. The release of the TC drug was studied in conditions similar to those in the human body in terms of acidity and temperature. The cumulative release of TC drug in 3 h was 50.65%, 42.33%, pH = 7.5 and pH 1.2, respectively

Phosphate ion removal from synthetic and real wastewater using MnFe2O4 nanoparticles: a reusable adsorbent

The purpose of this study was to eliminate phosphate (P) from wastewater using MnFe2O4 nanoparticles. BET, TGA/DTG, FTIR, SEM, TEM, VSM, XRD and EDX/Map analyses were used to determine the MnFe2O4 surface properties. The specific surface area of the adsorbent was 196.56 m2/g and VSM analysis showed that the adsorbent has a ferromagnetic property. The maximum P sorption efficiency using MnFe2O4 (98.52%) was achieved at pH 6, temperature of 55 °C, P concentration of 10 mg/L, time of 60 min, and sorbent dosage of 2.5 g/L, which is a significant value. Also, the thermodynamic study indicated that the P sorption process is spontaneous and endothermic. Moreover, the utmost sorption capacity of P using MnFe2O4 was 39.48 mg/g. Besides, MnFe2O4 can be used for up to 6 reuse cycles with high sorption efficiency (>91%). Also, MnFe2O4 was able to remove phosphate, COD, and BOD5 from municipal wastewater with considerable removal efficiencies of 82.7%, 75.8%, and 77.3%, respectively.Campus Lima Centr

Bonding Properties of AA1050 Strips Fabricated Via Electrically Assisted Roll Bonding (EARB) Process

In this study, aluminium alloy 1050 strips were bonded together using the electrically assisted roll bonding process (EARB) at electric current levels from 0 A up to 300 A. The effect of electric current level and plastic strain as the two main EARB parameters have been investigated on bonding strength by using the peel test. Results showed that by increasing the electric current level and reduction in thickness, stronger bonding strength can be obtained. Scanning electron microscopy was utilized to characterize the peeled surfaces of samples versus different thickness reduction ratios and electric current levels. Decreasing the forming strength of strips and increasing the bond strength of bonded strips about three times due to Joule heating effect in the EARB process was achieved. Moreover, by scanning electron microscopy (SEM), the peeled surfaces of samples after the peel test have been studied to investigate the bonding quality