Coffee grounds as a soil conditioner: Effects on physical and mechanical properties – II. Effects on mechanical properties

Applying coffee grounds (CG) to sandy, calcareous, and clayey soils resulted in notable effects on soil expansion, cracking, cohesion, internal friction, initial stress and resistance to penetration. In sand, expansion upon saturation was greater after wetting-and-drying cycles. Highest increases were 15.71%, 16.14% and 31.86% for sandy, calcareous and clayey soils, respectively. Effect of CG on cracking was negligible in sand and very slight (<1.0%) in the calcareous soil but marked in clay (14.18% at 10% CG). In sand, cohesion (c) increased significantly with CG up to the 10% content. Cohesion increased by 2.5-folds and 4.5-folds at 5% and 10% CG, respectively. The presence of fine CG grains among larger sand particles, boosted microbial activities, and the resulting cementing and binding effects resulted in increased cohesion. For calcareous soil, cohesion rose from 0.04 kg∙cm-2 to 0.13 kg∙cm-2 as CG increased from 0% to 15%. In clay, maximum cohesion (0.20 kg∙cm-2) was associated with the 10% CG and was highest of all soils. In sand, the angle of internal friction (φ) decreased notably as CG increased from 5% to 10% but there was no consistent pattern in any of the soils. An increase in initial stress (pi) was observed between 0% and 10% CG in sand and between 0% and 15% in calcareous soil while clay showed no particular trend. Patterns of pi were, thus, consistent with those of cohesion for all soils. Resistance to penetration increased substantially with CG in sand. The effect in calcareous and clayey soils took an opposite trend to that of sand and resistance was generally higher in calcareous soil. Overall effects of CG on resistance were desirable in all soils as far as agriculture (seedling emergence, crop growth, irrigation, etc.) is concerned