Axel Rover Tethered Dynamics and Motion Planning on Extreme Planetary Terrain

Some of the most appealing science targets for future exploration missions in our solar system lie in terrains that are inaccessible to state-of-the-art robotic rovers such as NASA's Opportunity, thereby precluding in situ analysis of these rich opportunities. Examples of potential high-yield science areas on Mars include young gullies on sloped terrains, exposed layers of bedrock in the Victoria Crater, sources of methane gas near Martian volcanic ranges, and stepped delta formations in heavily cratered regions. In addition, a recently discovered cryovolcano on Titan and frozen water near the south pole of our own Moon could provide a wealth of knowledge to any robotic explorer capable of accessing these regions. To address the challenge of extreme terrain exploration, this dissertation presents the Axel rover, a two-wheeled tethered robot capable of rappelling down steep slopes and traversing rocky terrain. Axel is part of a family of reconfigurable rovers, which, when docked, form a four-wheeled vehicle nicknamed DuAxel. DuAxel provides untethered mobility to regions of extreme terrain and serves as an anchor support for a single Axel when it undocks and rappels into low-ground. Axel's performance on extreme terrain is primarily governed by three key system components: wheel design, tether control, and intelligent planning around obstacles. Investigations in wheel design and optimizing for extreme terrain resulted in the development of grouser wheels. Experiments demonstrated that these grouser wheels were very effective at surmounting obstacles, climbing rocks up to 90% of the wheel diameter. Terramechanics models supported by experiments showed that these wheels would not sink excessively or become trapped in deformable terrain. Predicting tether forces in different configurations is also essential to the rover's mobility. Providing power, communication, and mobility forces, the tether is Axel's lifeline while it rappels steep slopes, and a cut, abraded, or ruptured tether would result in an untimely end to the rover's mission. Understanding tether forces are therefore paramount, and this thesis both models and measures tension forces to predict and avoid high-stress scenarios. Finally, incorporating autonomy into Axel is a unique challenge due to the complications that arise during tether management. Without intelligent planning, rappelling systems can easily become entangled around obstacles and suffer catastrophic failures. This motivates the development of a novel tethered planning algorithm, presented in this thesis, which is unique for rappelling systems. Recent field experiments in natural extreme terrains on Earth demonstrate the Axel rover's potential as a candidate for future space operations. Both DuAxel and its rappelling counterpart are rigorously tested on a 20 meter escarpment and in the Arizona desert. Through analysis and experiments, this thesis provides the framework for a new generation of robotic explorers capable of accessing extreme planetary regions and potentially providing clues for life beyond Earth.</p

Wheel Design and Tension Analysis for the Tethered Axel Rover on Extreme Terrain

As the Mars Exploration rovers have reaffirmed, some of the most interesting sites for scientists to explore on planetary surfaces lie in terrains that are currently inaccessible to state-of-the art rovers. We have been developing the Axel rover as a robotic platform to access steep and challenging terrain. We will summarize the recent mechanical upgrades since we introduced the tethered Axel concept last year

Axel: A Minimalist Tethered Rover for Exploration of Extreme Planetary Terrains

Recent scientific findings suggest that some of the most interesting sites for future exploration of planetary surfaces lie in terrains that are currently inaccessible to conventional robotic rovers. To provide robust and flexible access to these terrains, we have been developing Axel, the robotic rover. Axel is a lightweight two-wheeled vehicle that can access steep terrains and negotiate relatively large obstacles because of its actively managed tether and novel wheel design. This article reviews the Axel system and focuses on those system components that affect Axel's steep terrain mobility. Experimental demonstrations of Axel on sloped and rocky terrains are presented

Motion planning on steep terrain for the tethered axel rover

This paper considers the motion planning problem that arises when a tethered robot descends and ascends steep obstacle-strewn terrain. This work is motivated by the Axel tethered robotic rover designed to provide access to extreme extra-planetary terrains. Motion planning for this type of rover is very different from traditional planning problems because the tether geometry under high loading must be considered during the planning process. Furthermore, only round-trip paths that avoid tether entanglement are viable solutions to the problem. We present an algorithm for tethered robot motion planning on steep terrain that reduces the likelihood that the tether will become entangled during descent and ascent of steep slopes. The algorithm builds upon the notion of the shortest homotopic tether path and its associated sleeve. We provide a simple example for purposes of illustration

Progress in Development of the Axel Rovers

Progress has been made in the development of a family of robotic land vehicles having modular and minimalist design features chosen to impart a combination of robustness, reliability, and versatility. These vehicles at earlier stages of development were described in two previous NASA Tech Briefs articles: "Reconfigurable Exploratory Robotic Vehicles" (NPO-20944), Vol. 25, No. 7 (July 2001), page 56; and "More About Reconfigurable Exploratory Robotic Vehicles" (NPO-30890), Vol. 33, No. 8 (August 2009), page 40. Conceived for use in exploration of the surfaces of Mars and other remote planets, these vehicles could also be adapted to terrestrial applications, including exploration of volcanic craters or other hostile terrain, military reconnaissance, inspection of hazardous sites, and searching for victims of earthquakes, landslides, avalanches, or mining accidents. In addition, simplified versions of these vehicles might be marketable as toys. The most basic module in this family of reconfigurable robots is the Axel rover, which has a cylindrical body with two main wheels and a trailing link. Inside its body are three motors and associated mechanisms for driving the two wheels and for rotating the link 360 around its symmetrical body. The actuated link serves several purposes: It is used as a lever arm to react to the wheels thrust to move Axel in multiple directions. It is used to rotate the Axel housing in order to tilt, to the desired angle, any sensors and instruments mounted on or in the Axel housing. It provides an alternative mobility mode, which is primarily used in its tethered configuration. Turn ing the link into the ground in lieu of driving the wheels causes the Axel housing and wheels to roll as a unit and thereby leads to a tumbling motion along the ground. With a tether mounted around Axel s cylindrical body, the link serves as a winch mechanism to reel and unreel the tether raising and lowering Axel over steep and vertical surfaces (Figure 1). Sensors, computation, and communication modules are also housed inside Axel s body. A pair of stereo vision cameras provides three-dimensional view for autonomous navigation and avoiding obstacles. Inertial sensors determine the tilt of the robot and are used for estimating its motion. In a fully developed version, power would be supplied by rechargeable batteries aboard Axel; at the time of reporting the information for this article, power was supplied from an external source via a cable. In and of itself, the Axel rover is fully capable of traversing and sampling terrains on planetary surfaces. By use of only the two main wheel actuators and the caster link actuator, Axel can be made to follow an arbitrary path, turn in place, and operate upside- down or right-side-up. If operated in a tethered configuration, as shown in Figure 1, it can be made to move down and up a steep crater wall, descend from an overhang to a cave, and ascend from the cave back to the overhang, all by use of the same three actuators. Such tethered operation could be useful in searching for accident victims or missing persons in mines, caves, and rubble piles. Running the tether through the caster link enhances the stability of Axel and provides a restoring force that keeps the link off the ground for the most part during operation on a steep slope. In its extended configuration, two Axel modules can dock to either side of a payload module to form the four wheeled Axel2 rover (Figure 2). Additional payload and Axel modules can dock to either side of the Axel2 to form the Axel3 rover, extending its payload capacity and its mobility capabilities

Axel Robotic Platform for Crater and Extreme Terrain Exploration

To be able to conduct science investigations on highly sloped and challenging terrains, it is necessary to deploy science payloads to such locations and collect and process in situ samples. A tethered robotic platform has been developed that is capable of exploring very challenging terrain. The Axel rover is a symmetrical rover that is minimally actuated, can traverse arbitrary paths, and operate upside-down or right-side up. It can be deployed from a larger platform (rover, lander, or aerobot) or from a dual Axel configuration. Axel carries and manages its own tether, reducing damage to the tether during operations. Fundamentally, Axel is a two-wheeled rover with a symmetric body and a trailing link. Because the primary goal is minimal complexity, this version of the Axel rover uses only four primary actuators to control its wheels, tether, and a trailing link. A fifth actuator is used for level winding of tether onto Axel s spool

Robotic Two-Wheeled Vehicle

A robotic two-wheeled vehicle comprising a connection body interposed between the two wheels are described. A drum can be coaxially located in a central region of the connection body and can support a hollow arm projecting radially from the drum. A tether can be inserted in the arm and connected to a second drum. Instruments and sensors can be accommodated in a case housed inside each wheel

Axel Mobility Platform for Steep Terrain Excursions and Sampling on Planetary Surfaces

The recent discovery of bright new deposits in two crater gullies on Mars suggests that water still flows in brief spurts on Mars. In this paper, we will present the Axel rover (Figure 1) that was developed to access and sample such deposits on the inside of steep crater walls. Axel is a tethered rover that can be a payload on a lander or a larger rover. The primary features of Axel are its minimal complexity and robustness to the treacherous terrain of sites that are of scientific interest. Using a symmetrical design with three actuators, Axel is capable of operating upside down and right side up, enabling it to descend over crater promontories. With its actuated trailing link, Axel can operate on both flat and sloped terrains. Using a sampling device mounted on the trailing link, Axel can collect and store terrain samples and return to its host platform for detailed scientific sample analysis. We will present our preliminary results that demonstrated Axel's ability to traverse both flat and sloped rocky terrain including 90° vertical cliffs and collecting soil samples on slopes ranging from 10° - 40° in the JPL Mars Yard

Axel rover paddle wheel design, efficiency, and sinkage on deformable terrain

This paper presents the Axel robotic rover which has been designed to provide robust and flexible access to extreme extra-planetary terrains. Axel is a lightweight 2-wheeled vehicle that can access steep slopes and negotiate relatively large obstacles due to its actively managed tether and novel wheel design. This paper reviews the Axel system and focuses on its novel paddle wheel characteristics. We show that the paddle design has superior rock climbing ability. We also adapt basic terramechanics principles to estimate the sinkage of paddle wheels on loose sand. Experimental comparisons between the transport efficiency of mountain bike wheels and paddle wheels are summarized. Finally, we present an unfolding wheel prototype which allows Axel to be compacted for efficient transport