Electrowetting-Based Microdrop Tensiometer

We performed electrowetting (EW) contact angle measurements to determine the interfacial tension between aqueous drops laden with various inorganic and organic solutes and various ambient oils. Using low frequency AC voltage, we obtained interfacial tensions from 5 to 72 mJ/m2, in close agreement with macroscopic tensiometry for drop volumes between 20 and 2000 nL. In addition to the conventional EW geometry, we demonstrate the possibility of performing “contact-less” measurements without any loss of accuracy using interdigitated coplanar electrodes

Biosurfactants’ Production from Renewable Natural Resources: Example of Innovativeand Smart Technology in Circular Bioeconomy

A strong developed bio-based industrial sector will significantly reduce dependency on fossil resources, help the coun-tries meet climate change targets, and lead to greener and more environmental friendly growth. The key is to develop new technologies to sustainably transform renewable natural resources into bio-based products and biofuels. Biomass is a valuable resource and many parameters need to be taken in to account when assessing its use and the products made from its. The bioeconomy encompass the production of renewable biological resources and their conversion into food, feed and bio-based products (chemicals, materials and fuels) via innovative and efficient technologies provided by indus-trial biotechnology. The paper presents the smart and efficient way to use the agro-industrial, dairy and food processing wastes for biosurfactant’s production. Clarification processes are mandatory to use the raw substrates for microbial growth as well as biosurfactant production for commercial purposes. At the same time it is very essential to retain the nutritional values of those cheap substrates. Broad industrial perspectives can be achieved when quality as well as the quantity of the biosurfactant is considered in great depth. Since substrates resulting from food processing, dairy, animal fat industries are not explored in great details; and hence are potential areas which can be explored thoroughly

BIOSURFACTANTS’ PRODUCTION FROM RENEWABLE NATURAL RESOURCES: EXAMPLE OF INNOVATIVEAND SMART TECHNOLOGY IN CIRCULAR BIOECONOMY

A strong developed bio-based industrial sector will significantly reduce dependency on fossil resources, help the coun-tries meet climate change targets, and lead to greener and more environmental friendly growth. The key is to develop new technologies to sustainably transform renewable natural resources into bio-based products and biofuels. Biomass is a valuable resource and many parameters need to be taken in to account when assessing its use and the products made from its. The bioeconomy encompass the production of renewable biological resources and their conversion into food, feed and bio-based products (chemicals, materials and fuels) via innovative and efficient technologies provided by indus-trial biotechnology. The paper presents the smart and efficient way to use the agro-industrial, dairy and food processing wastes for biosurfactant’s production. Clarification processes are mandatory to use the raw substrates for microbial growth as well as biosurfactant production for commercial purposes. At the same time it is very essential to retain the nutritional values of those cheap substrates. Broad industrial perspectives can be achieved when quality as well as the quantity of the biosurfactant is considered in great depth. Since substrates resulting from food processing, dairy, animal fat industries are not explored in great details; and hence are potential areas which can be explored thoroughly

Low Voltage Electrowetting on Ferroelectric PVDF-HFP Insulator with Highly Tunable Contact Angle Range

We demonstrate a consistent electrowetting response on ferroelectric poly­(vinylidene fluoride-<i>co</i>-hexafluoropropylene) (PVDF-HFP) insulator covered with a thin Teflon AF layer. This bilayer exhibits a factor of 3 enhancement in the contact angle modulation compared to that of conventional single-layered Teflon AF dielectric. On the basis of the proposed model the enhancement is attributed to the high value of effective dielectric constant (ε_eff ≈ 6) of the bilayer. Furthermore, the bilayer dielectric exhibits a hysteresis-free contact angle modulation over many AC voltage cycles. But the contact angle modulation for DC voltage shows a hysteresis because of the field-induced residual polarization in the ferroelectric layer. Finally, we show that a thin bilayer exhibits contact angle modulation of Δθ (<i>U</i>) ≈ 60° at merely 15 V amplitude of AC voltage indicating a potential dielectric for practical low voltage electrowetting applications. A proof of concept confirms electrowetting based rapid mixing of a fluorescent dye in aqueous glycerol solution for 15 V AC signal

Low Voltage Electrowetting on Ferroelectric PVDF-HFP Insulator with Highly Tunable Contact Angle Range

We demonstrate a consistent electrowetting response on ferroelectric poly­(vinylidene fluoride-<i>co</i>-hexafluoropropylene) (PVDF-HFP) insulator covered with a thin Teflon AF layer. This bilayer exhibits a factor of 3 enhancement in the contact angle modulation compared to that of conventional single-layered Teflon AF dielectric. On the basis of the proposed model the enhancement is attributed to the high value of effective dielectric constant (ε_eff ≈ 6) of the bilayer. Furthermore, the bilayer dielectric exhibits a hysteresis-free contact angle modulation over many AC voltage cycles. But the contact angle modulation for DC voltage shows a hysteresis because of the field-induced residual polarization in the ferroelectric layer. Finally, we show that a thin bilayer exhibits contact angle modulation of Δθ (<i>U</i>) ≈ 60° at merely 15 V amplitude of AC voltage indicating a potential dielectric for practical low voltage electrowetting applications. A proof of concept confirms electrowetting based rapid mixing of a fluorescent dye in aqueous glycerol solution for 15 V AC signal

Spontaneous electrification of fluoropolymer-water interfaces probed by electrowetting

Fluoropolymers are widely used as coatings for their robustness, water-repellence, and chemical inertness. In contact with water, they are known to assume a negative surface charge, which is commonly attributed to adsorbed hydroxyl ions. Here, we demonstrate that a small fraction of these ions permanently sticks to surfaces of Teflon AF and Cytop, two of the most common fluoropolymer materials, upon prolonged exposure to water. Electrowetting measurements carried out after aging in water are used to quantify the density of ‘trapped’ charge. Values up to −0.07 and −0.2 mC m−2 are found for Teflon AF and for Cytop, respectively, at elevated pH. A similar charge trapping process is also observed upon aging in various non-aqueous polar liquids and in humid air. A careful analysis highlights the complementary nature of electrowetting and streaming potential measurements in quantifying interfacial energy and charge density. We discuss the possible mechanism of charge trapping and highlight the relevance of molecular scale processes for the long term stability and performance of fluoropolymer materials for applications in electrowetting and elsewhere

Electrically Tunable Wetting Defects Characterized by a Simple Capillary Force Sensor

We present a concept of a wetting defect of continuously variable strength based on electrowetting, along with a capillary force sensor adapted for the characterization of macroscopically heterogeneous surfaces. Patterned electrodes submerged under an insulating layer are used to generate potential wells for drops of electrically conductive liquids on the solid surface, with a well depth that scales with the diameter of the drop and square of the applied alternating (AC) voltage. We characterize the strength of the electrowetting trap and the hysteretic motion of the drop along the surface, using a simple force sensor based on optical imaging of a thin bendable capillary. A force resolution of approximately 0.1 μN is achieved