Enterprise strategy requirements engineering framework : towards completeness of system requirements

University of Technology, Sydney. Faculty of Engineering and Information Technology.Empirical evidence shows that the success of a project depends on the completeness of system requirements. Although requirements engineering literature demonstrates how important strategic business goals are for the development of requirements models, it does not examine their effect on the completeness of system requirements. The objective of this research is to propose and test a framework that shows the influence of strategic business requirements on the completeness of system requirements. The framework integrates strategic business requirements with the functional requirements, non-functional requirements and completeness of system requirements to measure their direct and indirect influence. This framework (the Enterprise Strategic Requirements Engineering Framework) has been evaluated and validated by two studies. In the first study, business analysts collected lists of requirements from system stakeholders. In the second study, business analysts assessed those lists in terms of their completeness. More than 100 business analysts with varying degrees of experience participated in these studies. Structured equation models were used to analyse the data in order to show the effects of strategic business requirements on the completeness of system requirements. The results support the proposed framework and show that it is a true representation of the relationship between strategic business requirements, functional requirements, non-functional requirements and the completeness of requirements lists. This thesis contributes to the field of requirements engineering in various ways. It highlights the importance of collecting a list of strategic business requirements and it demonstrates why this should be treated as an individual list, rather than simply a sub-set of a list of non-functional requirements. The results also show that strategic business requirements influence both non-functional and functional requirements, as well as the completeness of system requirements. Finally, the research found that business analysts play a critical role in capturing requirements. The results show that novices did not approach many stakeholders and did not consider any business strategy requirements, whereas more experienced business analysts collected requirements from many stakeholders, including senior management, where strategic business requirements were available. This framework will be extremely valuable in giving support to the many approaches that highlight the importance of strategy. It clarifies the importance of collecting strategic business requirements and it will be valuable for the education of requirements engineers, business analysts and others who perform the task of collecting requirements

An integrated approach of GRA coupled with principal component analysis for multi-optimization of shielded metal arc welding (SMAW) process

Welding distortion is a critical issue as it leads to severe deterioration of structural integrity of welded work piece and dimensional precision. This study aims at studying the e ects of shielded metal arc welding (SMAW) parameters on the evolution of mechanical properties, including tensile strength, impact toughness, and hardness, along with angular distortion on a welded joint from SA 516 grade 70. Such parameters are analyzed and optimized by employing the Taguchi method and Grey relational analysis. SA 516 grade 70 is commercially used for fabrication of storage tanks, boilers and pressure vessels. SMAW is investigated with three levels of root gap, groove angle, electrode diameter, and pre-heat temperature, which were varied on a butt joint in flat (1 G) position to determine their e ects on response variables at room temperature. Nine experiments were designed using a Taguchi L9 orthogonal array, welded according to American Society of Mechanical Engineers (ASME) section IX, and samples were prepared and tested as per ASTM A 370. The Taguchi method and Grey relational analysis were employed to observe the most significant parameters and optimal levels that synergically yield improved responses. Results are validated by conducting confirmatory experiments that show good agreement with optimum results

Measurement of D-s(+) and D-s(*+) production in B meson decays and from continuum e(+)e(-) annihilation at √s=10.6 GeV

This is the pre-print version of the Article. The official published version can be accessed from the links below. Copyright @ 2002 APSNew measurements of Ds+ and Ds*+ meson production rates from B decays and from qq̅ continuum events near the Υ(4S) resonance are presented. Using 20.8 fb-1 of data on the Υ(4S) resonance and 2.6 fb-1 off-resonance, we find the inclusive branching fractions B(B⃗Ds+X)=(10.93±0.19±0.58±2.73)% and B(B⃗Ds*+X)=(7.9±0.8±0.7±2.0)%, where the first error is statistical, the second is systematic, and the third is due to the Ds+→φπ+ branching fraction uncertainty. The production cross sections σ(e+e-→Ds+X)×B(Ds+→φπ+)=7.55±0.20±0.34pb and σ(e+e-→Ds*±X)×B(Ds+→φπ+)=5.8±0.7±0.5pb are measured at center-of-mass energies about 40 MeV below the Υ(4S) mass. The branching fractions ΣB(B⃗Ds(*)+D(*))=(5.07±0.14±0.30±1.27)% and ΣB(B⃗Ds*+D(*))=(4.1±0.2±0.4±1.0)% are determined from the Ds(*)+ momentum spectra. The mass difference m(Ds+)-m(D+)=98.4±0.1±0.3MeV/c2 is also measured.This work was supported by DOE and NSF (USA), NSERC (Canada), IHEP (China), CEA and CNRS-IN2P3 (France), BMBF (Germany), INFN (Italy), NFR (Norway), MIST (Russia), and PPARC (United Kingdom). Individuals have received support from the Swiss NSF, A. P. Sloan Foundation, Research Corporation, and Alexander von Humboldt Foundation

Measurement of the branching fraction and CP content for the decay B(0) -> D(*+)D(*-)

This is the pre-print version of the Article. The official published version can be accessed from the links below. Copyright @ 2002 APS.We report a measurement of the branching fraction of the decay B0→D*+D*- and of the CP-odd component of its final state using the BABAR detector. With data corresponding to an integrated luminosity of 20.4  fb-1 collected at the Υ(4S) resonance during 1999–2000, we have reconstructed 38 candidate signal events in the mode B0→D*+D*- with an estimated background of 6.2±0.5 events. From these events, we determine the branching fraction to be B(B0→D*+D*-)=[8.3±1.6(stat)±1.2(syst)]×10-4. The measured CP-odd fraction of the final state is 0.22±0.18(stat)±0.03(syst).This work is supported by DOE and NSF (USA), NSERC (Canada), IHEP (China), CEA and CNRS-IN2P3 (France), BMBF (Germany), INFN (Italy), NFR (Norway), MIST (Russia), and PPARC (United Kingdom). Individuals have received support from the A.P. Sloan Foundation, Research Corporation, and Alexander von Humboldt Foundation

Towards Blockchain-Based Identity and Access Management for Internet of Things in Enterprises

With the Internet of Things (IoT) evolving more and more, companies active within this area face new challenges for their Identity and Access Management (IAM). Namely, general security, resource constraint devices, interoperability, and scalability cannot be addressed anymore with traditional measures. Blockchain technology, however, may act as an enabler to overcome those challenges. In this paper, general application areas for blockchain in IAM are described based on recent research work. On this basis, it is discussed how blockchain can address IAM challenges presented by IoT. Finally, a corporate scenario utilizing blockchain-based IAM for IoT is outlined to assess the applicability in practice. The paper shows that private blockchains can be leveraged to design tamper-proof IAM functionality while maintaining scalability regarding the number of clients and transactions. This could be useful for enterprises to prevent single-point-of-failures as well as to enable transparent and secure auditing & monitoring of security-relevant events

Palladium nanoparticles supported on fluorine-doped tin oxide as an efficient heterogeneous catalyst for Suzuki coupling and 4-nitrophenol reduction

Immobilization of palladium nanoparticles onto the fluorine-doped tin oxide (FTO) as support Pd/FTO, resulted in a highly active heterogeneous catalyst for Suzuki-Miyaura cross-coupling reactions and 4-nitrophenol reduction. The Pd/FTO catalyst has been synthesized by immobilization of palladium nanoparticles onto FTO via a simple impregnation method. ICP-MS analysis confirmed that there is 0.11 mmol/g of palladium was loaded successfully on FTO support. The crystallinity, morphologies, compositions and surface properties of Pd/FTO were fully characterized by various techniques. It was further examined for its catalytic activity and robustness in Suzuki coupling reaction with different aryl halides and solvents. The yields obtained from Suzuki coupling reactions were basically over 80%. The prepared catalyst was also tested on mild reaction such as reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). Pd/FTO catalyst exhibited high catalytic activity towards 4-NP reduction with a rate constant of 1.776 min(-1) and turnover frequency (TOF) value of 29.1 hr(-1). The findings revealed that Pd/FTO also maintained its high stability for five consecutive runs in Suzuki reactions and 4-NP reductions. The catalyst showed excellent catalytic activities by using a small amount of Pd/FTO for the Suzuki coupling reaction and 4-NP reduction

Knowledge and awareness of the general public and perception of pharmacists about antibiotic resistance

Background Antibiotic resistance (AR) continues to be a serious problem. Many factors contribute to AR, including inappropriate use of antibiotics, in which both healthcare professionals and patients play a contributing role. This study aimed to assess the awareness and knowledge of antibiotic usage and AR among the general public (in affluent and deprived areas) and community pharmacists' (CPs') in Greater London. Methods A cross-sectional survey involving members of the public was conducted between July 2014 and February 2015. Stage one involved members of the public (N = 384) residing in affluent areas of London. The second stage targeted public (N = 384) in deprived areas of London. In addition, CPs (N = 240) across the same areas were also surveyed. Data analysis was performed using Microsoft Excel and SPSS Software packages. Results Response rate: 36% (n = 139/384) and 57% (n = 220/384) and 25% (n = 60/240) of public residing in affluent areas, deprived areas and of CPs respectively was achieved. Definitive trends in knowledge of how antibiotics work could not be drawn to distinguish between affluent and deprived areas. However, public respondents residing in affluent areas possessed better understanding of AR and prudent use of antibiotics, and this was statistically significant in both cases (p < 0.05). Exposure to an antibiotic campaign (32% in affluent areas, 17% in deprived areas) did not raise public respondents' knowledge on AR and only partially raised their general knowledge on antibiotics usage. Only 20% of public residing in deprived areas received counselling from a CP, among them 74% had an antibiotic prescribed on at least one previous occasion. Those who received counselling displayed better knowledge about concordance/adherence with respect to antibiotic usage (p < 0.05) whereas exposure to an antibiotic campaign made no significant impact on knowledge about concordance/adherence. Conclusion The study highlights that there has been no change in the status quo with respect to awareness of antibiotic usage and AR even after the implementation of several awareness campaigns in England. Those who benefited from CP counselling showed a significant better knowledge towards prudent antibiotic usage which stresses the importance of CPs' counselling on antibiotic prescription