3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis

Machining Glass fibre aluminium reinforced epoxy (GLARE) is cumbersome due to distinctively different mechanical and thermal properties of its constituents, which makes it challenging to achieve damage-free holes with the acceptable surface quality. The proposed work focuses on the study of the machinability of thin (~2.5 mm) GLARE laminate. Drilling trials were conducted to analyse the effect of feed rate and spindle speed on the cutting forces and hole quality. The resulting hole quality metrics (surface roughness, hole size, circularity error, burr formation and delamination) were assessed using surface profilometry and optical scanning techniques. A three dimensional (3D) finite-element (FE) model of drilling GLARE laminate was also developed using ABAQUS/Explicit to help understand the mechanism of drilling GLARE. The homogenised ply-level response of GLARE laminate was considered in the FE model to predict cutting forces in the drilling process

Twelve-month observational study of children with cancer in 41 countries during the COVID-19 pandemic

Introduction Childhood cancer is a leading cause of death. It is unclear whether the COVID-19 pandemic has impacted childhood cancer mortality. In this study, we aimed to establish all-cause mortality rates for childhood cancers during the COVID-19 pandemic and determine the factors associated with mortality. Methods Prospective cohort study in 109 institutions in 41 countries. Inclusion criteria: children <18 years who were newly diagnosed with or undergoing active treatment for acute lymphoblastic leukaemia, non-Hodgkin's lymphoma, Hodgkin lymphoma, retinoblastoma, Wilms tumour, glioma, osteosarcoma, Ewing sarcoma, rhabdomyosarcoma, medulloblastoma and neuroblastoma. Of 2327 cases, 2118 patients were included in the study. The primary outcome measure was all-cause mortality at 30 days, 90 days and 12 months. Results All-cause mortality was 3.4% (n=71/2084) at 30-day follow-up, 5.7% (n=113/1969) at 90-day follow-up and 13.0% (n=206/1581) at 12-month follow-up. The median time from diagnosis to multidisciplinary team (MDT) plan was longest in low-income countries (7 days, IQR 3-11). Multivariable analysis revealed several factors associated with 12-month mortality, including low-income (OR 6.99 (95% CI 2.49 to 19.68); p<0.001), lower middle income (OR 3.32 (95% CI 1.96 to 5.61); p<0.001) and upper middle income (OR 3.49 (95% CI 2.02 to 6.03); p<0.001) country status and chemotherapy (OR 0.55 (95% CI 0.36 to 0.86); p=0.008) and immunotherapy (OR 0.27 (95% CI 0.08 to 0.91); p=0.035) within 30 days from MDT plan. Multivariable analysis revealed laboratory-confirmed SARS-CoV-2 infection (OR 5.33 (95% CI 1.19 to 23.84); p=0.029) was associated with 30-day mortality. Conclusions Children with cancer are more likely to die within 30 days if infected with SARS-CoV-2. However, timely treatment reduced odds of death. This report provides crucial information to balance the benefits of providing anticancer therapy against the risks of SARS-CoV-2 infection in children with cancer

Model for the prediction of low-frequency lateral vibrations in drilling process with pilot hole

A model that predicts the appearance of low-frequency lateral vibrations in drilling with pilot hole is proposed in this work. These vibrations, called whirling in the literature, are responsible for the generation of lobe-shaped holes during drilling. The present model considers both the influence of the regenerative effect of vibrations on the cutting forces and the influence of the process damping phenomenon that appears along the main cutting edges. In order to model cutting forces, cutting edges are divided into discrete elements and for each of them oblique cutting model is employed. Specific cutting forces at each cutting edge element are calculated as function of cutting speed and normal rake angle value. A new methodology is developed to analyze the motion equation of the drill in the frequency domain in order to predict the appearance of whirling vibrations during drilling with pilot hole. Regarding the depth of cut and the spindle rotational speed, drilling stability limits against low-frequency lateral vibrations are obtained. Moreover, in the presence of vibrations, the model can predict the whirling frequencies that are excited depending on the established cutting conditions. In addition, the stability model is experimentally validated via drilling tests over pilot holes of different diameters for a wide range of cutting conditions. In order to study the appearance of low-frequency vibrations and to avoid the appearance of other vibrations such as regenerative chatter, the analysis is focused on low spindle speed values. A comparison between predicted vibration frequencies and actual frequencies in measured cutting forces during drilling tests is carried out and a good correlation between them is observed