Grout rheological properties for preplaced aggregate concrete production

yesThis paper investigates the effect of cement based grout rheology on the injection process through coarse aggregate for producing preplaced aggregate concrete. Four different sands were used in the grout production at different water-cement ratios and cement-sand ratios. Superplasticiers and pulverised fuel ash were also employed in the grout production. Coarse aggregate of known weight was compacted into 150 mm cubic forms, and then the grout was injected through a plastic pipe under self weight into the stone ‘skeleton’. It has been found that there are threshold values of the rheological parameters beyond which full injection is not possible. In particular, all grout mixes with and without additives and admixtures exhibited the same yield stress threshold value for full injection, whereas the threshold values for other rheological properties including the grout plastic viscosity, flow time and speed were different according to the materials added to the mix

Sites of persistence of Fusobacterium necrophorum and Dichelobacter nodosus: a paradigm shift in understanding the epidemiology of footrot in sheep

Sites of persistence of bacterial pathogens contribute to disease dynamics of bacterial diseases. Footrot is a globally important bacterial disease that reduces health and productivity of sheep. It is caused by Dichelobacter nodosus, a pathogen apparently highly specialised for feet, while Fusobacterium necrophorum, a secondary pathogen in footrot is reportedly ubiquitous on pasture. Two prospective longitudinal studies were conducted to investigate the persistence of D. nodosus and F. necrophorum in sheep feet, mouths and faeces, and in soil. Molecular tools were used to detect species, strains and communities. In contrast to the existing paradigm, F. necrophorum persisted on footrot diseased feet, and in mouths and faeces; different strains were detected in feet and mouths. D. nodosus persisted in soil and on diseased, but not healthy, feet; similar strains were detected on both healthy and diseased feet of diseased sheep. We conclude that D. nodosus and F. necrophorum depend on sheep for persistence but use different strategies to persist and spread between sheep within and between flocks. Elimination of F. necrophorum would be challenging due to faecal shedding. In contrast D. nodosus could be eliminated if all footrot-affected sheep were removed and fade out of D. nodosus occurred in the environment before re-infection of a foot

Educating the global designer

Distributed design teams place a far heavier reliance on communication and collaboration than conventional collocated teams and as a consequence require design team members to acquire and develop an enhanced collaborative skill set. Given that distributed design teams are likely to remain as a dominant feature of product development for the foreseeable future there is a need to ensure that engineering graduates are equipped with the necessary knowledge and skills. This paper describes work carried out and the University of Strathclyde and elsewhere in the development of a curriculum for distributed design

The effect of footrot on body weight and wool growth of sheep

Body weight and traits associated with production of wool were measured over a 2-year period between 1985 and 1987 in south-western New South Wales in a flock of Merino wethers experimentally infected with footrot. The disease was allowed to spread freely amongst 150 of the flock but kept at very low prevalence in the remaining 50 by preventive footbathing during transmission periods. Severe, underrunning footrot had a significant adverse effect on body weight, for each year of the trial. Body weight was most severely reduced at times of the year when footrot was spreading among animals and lesions were severe. The mean body weight of the infected group at the end of the 2 years of observation was 7.3 kg (11.6%) below that of the control group. Footrot also depressed wool growth, with the mean clean fleece weight of the infected group being 0.4 kg (8%) lighter than that of the controls at each of the 2 annual shearings. There were no consistent differences between the groups for the other wool characteristics measured

Comparing safety culture and learning culture

This article examines the alignment of learning and safety culture in organisations. It tests the hypothesis that factors that indicate a good learning culture might also signify good safety and vice versa. The hypothesis was tested through an intensive literature review. Areas of alignment of learning culture and safety culture were identified. Six components of learning culture and safety culture can be measured by the same instrument. These components form guiding principles for measurement of safety culture and learning culture. Another eight component areas were identified where learning culture and safety culture partially align. Four further components were found to be relevant to either safety culture or learning culture and do not align. Overall, there is a relationship between learning culture and safety culture, but gauging one does not provide a reliable measure of the other