Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites : a comprehensive analysis of machining-induced damage responses

This paper aims at investigating the effects of variable traverse speeds on machining-induced damage of fibre-reinforced composites, using the abrasive water jet (AWJ) drilling. Three different types of epoxy-based composites laminates fabricated by vacuum bagging technique containing unidirectional (UD) flax, hybrid carbon-flax and carbon fibre-reinforced composite were used. The drilling parameters used were traverse speeds of 20, 40, 60 and 80 mm/min, constant water jet pressure of 300 MPa and a hole diameter of 10 mm. The results obtained depict that the traverse speed had a significant effect with respect to both surface roughness and delamination drilling-induced damage responses. Evidently, an increase in water jet traverse speed caused an increase in both damage responses of the three samples. Significantly, the CFRP composite sample recorded the lowest surface roughness damage response, followed by C-FFRP, while FFRP exhibited the highest. However, samples of FFRP and hybrid C-FFRP recorded lowest and highest delamination damage responses, respectively. The discrepancy in both damage responses, as further validated with micrographs of colour video microscopy (CVM), scanning electron microscopy (SEM) and X-ray micro-computed tomography (X-ray μCT), is attributed to the different mechanical properties of the reinforced fibres, fibre orientation/ply stacking and hybridisation of the samples.Peer reviewe

Pneumocystis jirovecii pneumonia in tropical and low and middle income countries: a systematic review and meta-regression

Objective: Pneumocystis jirovecii pneumonia (PCP), the commonest opportunistic infection in HIV-infected patients in the developed world, is less commonly described in tropical and low and middle income countries (LMIC). We sought to investigate predictors of PCP in these settings. Design Systematic review and meta-regression. METHODS: Meta-regression of predictors of PCP diagnosis (33 studies). Qualitative and quantitative assessment of recorded CD4 counts, receipt of prophylaxis and antiretrovirals, sensitivity and specificity of clinical signs and symptoms for PCP, co-infection with other pathogens, and case fatality (117 studies). RESULTS: The most significant predictor of PCP was per capita Gross Domestic Product, which showed strong linear association with odds of PCP diagnosis (p30%; treatment was largely appropriate. Prophylaxis appeared to reduce the risk for development of PCP, however 24% of children with PCP were receiving prophylaxis. CD4 counts at presentation with PCP were usually <200×10 3/ ml. CONCLUSIONS: There is a positive relationship between GDP and risk of PCP diagnosis. Although failure to diagnose infection in poorer countries may contribute to this, we also hypothesise that poverty exposes at-risk patients to a wide range of infections and that the relatively non-pathogenic P. jirovecii is therefore under-represented. As LMIC develop economically they eliminate the conditions underlying transmission of virulent infection: P. jirovecii , ubiquitous in all settings, then becomes a greater relative threat