WTC2005-63696 FRICTION AND WEAR BEHAVIOR OF BORONIZED CHROMIUM FOR BIOLOGICAL APPLICATIONS

ABSTRACT Enhanced corrosion and wear resistance are crucially important to prolong the service life of biomaterials. Boronizing has been reported to enhance the wear resistance of pure chromium. In this research, we investigate friction and wear behavior of boronized chromium. Pin-on-disc tribometer was used to conduct the wear and friction tests. Experiments were conducted in dry conditions as well as in simulated body fluid (SBF). Fundamental aspects of wear mode and lubrication behavior were studied using surface characterization techniques such as TEM, and X-ray diffraction. Results showed evidence of tribo-chemical interactions between SBF and work piece materials. INTRODUCTION Boride coatings have been applied to metal surfaces in order to improve their corrosion resistance, electrochemical properties, tribological performance, and to prolong service life [1, 2, 3 and 4]. Boronizing is one way to form this uniform coating on the substrate material. It is a thermo-chemical diffusion surface treatment in which boron atoms diffuse into the surface of the work piece to form hard borides with the base material

WTC2005-63696 FRICTION AND WEAR BEHAVIOR OF BORONIZED CHROMIUM FOR BIOLOGICAL APPLICATIONS

ABSTRACT Enhanced corrosion and wear resistance are crucially important to prolong the service life of biomaterials. Boronizing has been reported to enhance the wear resistance of pure chromium. In this research, we investigate friction and wear behavior of boronized chromium. Pin-on-disc tribometer was used to conduct the wear and friction tests. Experiments were conducted in dry conditions as well as in simulated body fluid (SBF). Fundamental aspects of wear mode and lubrication behavior were studied using surface characterization techniques such as TEM, and X-ray diffraction. Results showed evidence of tribo-chemical interactions between SBF and work piece materials. INTRODUCTION Boride coatings have been applied to metal surfaces in order to improve their corrosion resistance, electrochemical properties, tribological performance, and to prolong service life [1, 2, 3 and 4]. Boronizing is one way to form this uniform coating on the substrate material. It is a thermo-chemical diffusion surface treatment in which boron atoms diffuse into the surface of the work piece to form hard borides with the base material

Characterization of gas tunnel type plasma sprayed hydroxyapatite-nanostructure titania composite coatings

Hydroxyapatite (HA) can be coated onto metal implants as a ceramic biocompatible coating to bridge the growth between implants and human tissue. Meanwhile many efforts have been made to improve the mechanical properties of the HA coatings without affecting its bioactivity. In the present study, nanostructure titania (TiO2) was mixed with HA powder and HA–nanostructure TiO2 composite coatings were produced by gas tunnel type plasma spraying torch under optimized spraying conditions. For this purpose, composition of 10 wt% TiO2 + 90 wt% HA, 20 wt% TiO2 + 80 wt% HA and 30 wt% TiO2 + 70 wt% HA were selected as the feedstock materials. The phase, microstructure and mechanical properties of the coatings were characterized. The obtained results validated that the increase in weight percentage of nanostructure TiO2 in HA coating significantly increased the microhardness, adhesive strength and wear resistance of the coatings. Analysis of the in vitro bioactivity and cytocompatibility of the coatings were done using conventional simulated body fluid (c-SBF) solution and cultured green fluorescent protein (GFP) labeled marrow stromal cells (MSCs) respectively. The bioactivity results revealed that the composite coating has bio-active surface with good cytocompatibility

The importance of Lp(a)-fibronectin interaction in atherogenesis

An elevated concentration of lipoprotein (a) (Lp(a)) in serum has been considered a risk factor for coronary heart disease by various investigators. The apo(a) portion of Lp(a) binds to the carboxyterminal heparin binding domain of fibronectin. Lp(a) bound to fibronectin is internalized through the fibronectin receptor pathway and thereby causes increased accumulation of lipid and foam cell formation. In the present study, fibronectin and Lp(a) concentrations have been assayed in patients with coronary heart disease (CHD) and healthy subjects