Morphology and Properties of Zn-Al-TiO2 Composite on Mild Steel

The influence of TiO2 composite and dispersed pure Al particle on zinc alloy electrodeposited on mild steel was studied from chloride bath solution.Microstructural and mechanical properties of the alloy were investigated. The structure, surface morphology, and surface topography of the deposited alloys were characterized by scanning electron microscopy (SEM) and atomic force microscope (AFM).In addition, hardness of the coated alloys was measured. It was found that the obtained Zn-Al-TiO2 alloyexhibited more preferred surface morphology and mechanical strength compared tothe substrate. The result shows the existence of interaction between TiO2 compounds and zinc alloy particulate. It also exhibited well bright dominate zinc coating on steel surface

Effect of Tobacco and Kola Tree Extracts on the Corrosion Inhibition of Mild Steel in Acid Chloride

Corrosion and inhibitor protection of mild steel specimens immersed in acid chloride solution was investigated at ambient temperature by gravimetric and potential monitoring methods. The electrode potential monitoring was performed using a digital voltmeter and a saturated calomel electrode (SCE) as the reference electrode. Extracts of kola plant and tobacco in different concentrations were used as ‘green’ inhibitors. This paper reports the results obtained from the weight loss method, calculated corrosion rates and the observed electrochemical response from the electrochemical potential monitoring of the mild steel during the experiments. A reduction in the active corrosion reactions behaviour of the mild steel test specimens in the strong acid chloride was obtained with the addition of different concentrations of the plants extracts. There was a drastic reduction in the weight loss and in the corrosion rate of the test samples. This behaviour was attributed to the protective film provided on the steel’s surface by the complex chemical constituents of the plants extracts. Effective protection of the mild steel was achieved in nearly all the extracts for the greater part of the experimental period. However, the most effective results were obtained from the tobacco extract and also from the extract of kola leaf

Inhibitive effect of ferrous gluconate on the electrochemical corrosion of aluminium alloy in H2SO4 solution

The use of ferrous gluconate as corrosion inhibitor on aluminium alloy in 0.5M H2SO4 solution was studied using gravimetric and potentiodynamic polarization measurements. The surface morphology of the aluminium alloy was studied after exposure to 0.5 M H2SO4 solution in the presence and absence of inhibitor using high resolution scanning electron microscopy equipped with energy dispersive spectroscopy (HRSEM – EDS). The adsorption behaviour of the inhibitor was investigated. The results of the investigation show that increase in concentration of ferrous gluconate corresponds to an improvement on inhibition efficiency. Equally, the results showed the ferrous gluconate to be an effective corrosion inhibitor for the aluminium in the acidic medium. The results obtained from the two methods used were found to correlate with each other