Frontal Polymerization and Geopolymerization, the First Example: Organic-Inorganic Hybrid Materials

This work shows the first example of frontal geopolymerization, obtained in the same reactor in which the frontal polymerization of 1,6 hexanediolodiaacrylate occurs at the same time; the simultaneous frontal polymerization allows to obtain an organic-inorganic hybrid material in a single step and in a short time (a few minutes), thanks to the exothermicity of the two reactions which are mutually self-supporting. This technique represents the only way to obtain hybrid organic polymer-geopolymer mate-rials: using the classical polymerization (prolonged heating) the reaction is explosive due to the formation of gaseous products, while the polymerization at room temperature, due to the very long times, leads to a phase separation

Piezoelectricity measurements of hybrid films functionalized with ZnO nanostructures and cellulose nanocrystals

Piezoelectric energy scavengers for the conversion of mechanical energy (e.g., pressure, bending, stretching and vibrational motions) into electricity, have been manufactured using both polymeric and inorganic materials as well as a combination of those [1-3]. It is well known that inorganic materials possess larger piezoelectric coefficients than polymers, however they exhibit higher stiffness, which makes them less sensitive to small vibrations and more prone to stress failure. On the other hand, polymer-based generators represent a relatively small proportion of the total research due to the involvement of complicated material processing and device fabrication (using precise manipulators), which represent hurdles for scalability and cost. The aim of this work is to develop a novel coating of easy fabrication and low environmental impact that could lead to a real competition in the field of renewable/alternative energy technologies. In particular, we have utilized two different geometries of ZnO nanoparticles, synthesized on purpose and embedded into a UV-curable acrylic polymer matrix. The experimental set-up for assessing the piezoelectric behavior of the obtained UV-cured films has been assembled and preliminary results of this behavior are here presented

The Interplay between TRPM7 and MagT1 in Maintaining Endothelial Magnesium Homeostasis

The transient receptor potential cation channel subfamily M member 7 (TRPM7) is an ubiquitous channel fused to an α-kinase domain involved in magnesium (Mg) transport, and its level of expression has been proposed as a marker of endothelial function. To broaden our present knowledge about the role of TRPM7 in endothelial cells, we generated stable transfected Human Endothelial Cells derived from the Umbilical Vein (HUVEC). TRPM7-silencing HUVEC maintain the actin fibers’ organization and mitochondrial network. They produce reduced amounts of reactive oxygen species and grow faster than controls. Intracellular Mg concentration does not change in TRPM7-silencing or -expressing HUVEC, while some differences emerged when we analyzed intracellular Mg distribution. While the levels of the plasma membrane Mg transporter Solute Carrier family 41 member 1 (SLC41A1) and the mitochondrial channel Mrs2 remain unchanged, the highly selective Magnesium Transporter 1 (MagT1) is upregulated in TRPM7-silencing HUVEC through transcriptional regulation. We propose that the increased amounts of MagT1 grant the maintenance of intracellular Mg concentrations when TRPM7 is not expressed in endothelial cells

The role of pH on the thermodynamics and kinetics of muscle biochemistry: An in vivo study by 31P-MRS in patients with myo-phosphorylase deficiency

AbstractIn this study we assessed ΔG′ATP hydrolysis, cytosolic [ADP], and the rate of phosphocreatine recovery using Phosphorus Magnetic Resonance Spectroscopy in the calf muscle of a group of patients affected by glycogen myo-phosphorylase deficiency (McArdle disease). The goal was to ascertain whether and to what extent the deficit of the glycogenolytic pathway would affect the muscle energy balance. A typical feature of this pathology is the lack of intracellular acidosis. Therefore we posed the question of whether, in the absence of pH decrease, the rate of phosphocreatine recovery depends on the amount of phosphocreatine consumed during exercise. Results showed that at the end of exercise both [ADP] and ΔG′ATP of patients were significantly higher than those of matched control groups reaching comparable levels of phosphocreatine concentration. Furthermore, in these patients we found that the rate of phosphocreatine recovery is not influenced by the amount of phosphocreatine consumed during exercise. These outcomes provide experimental evidence that: i) the intracellular acidification occurring in exercising skeletal muscle is a protective factor for the energy consumption; and ii) the influence of pH on the phosphocreatine recovery rate is at least in part related to the kinetic mechanisms of mitochondrial creatine kinase enzyme

Combined use of x-ray fluorescence microscopy, phase contrast imaging for high resolution quantitative iron mapping in inflamed cells

X-ray fluorescence microscopy (XRFM) is a powerful technique to detect and localize elements in cells. To derive information useful for biology and medicine, it is essential not only to localize, but also to map quantitatively the element concentration. Here we applied quantitative XRFM to iron in phagocytic cells. Iron, a primary component of living cells, can become toxic when present in excess. In human fluids, free iron is maintained at 10-18 M concentration thanks to iron binding proteins as lactoferrin (Lf). The iron homeostasis, involving the physiological ratio of iron between tissues/secretions and blood, is strictly regulated by ferroportin, the sole protein able to export iron from cells to blood. Inflammatory processes induced by lipopolysaccharide (LPS) or bacterial pathoge inhibit ferroportin synthesis in epithelial and phagocytic cells thus hindering iron export, increasing intracellular iron and bacterial multiplication. In this respect, Lf is emerging as an important regulator of both iron and inflammatory homeostasis. Here we studied phagocytic cells inflamed by bacterial LPS and untreated or treated with milk derived bovine Lf. Quantitative mapping of iron concentration and mass fraction at high spatial resolution is obtained combining X-ray fluorescence microscopy, atomic force microscopy and synchrotron phase contrast imaging

Assessment and imaging of intracellular magnesium in saos-2 osteosarcoma cells and its role in proliferation

Magnesium is an essential nutrient involved in many important processes in living organ-isms, including protein synthesis, cellular energy production and storage, cell growth and nucleic acid synthesis. In this study, we analysed the effect of magnesium deficiency on the proliferation of SaOS-2 osteosarcoma cells. When quiescent magnesium-starved cells were induced to proliferate by serum addition, the magnesium content was 2–3 times lower in cells maintained in a medium without magnesium compared with cells growing in the presence of the ion. Magnesium depletion inhibited cell cycle progression and caused the inhibition of cell proliferation, which was associated with mTOR hypophosphorylation at Serine 2448. In order to map the intracellular magnesium distribution, an analytical approach using synchrotron-based X-ray techniques was applied. When cell growth was stimulated, magnesium was mainly localized near the plasma membrane in cells maintained in a medium without magnesium. In non-proliferating cells growing in the presence of the ion, high concentration areas inside the cell were observed. These results support the role of magnesium in the control of cell proliferation, suggesting that mTOR may represent an important target for the antiproliferative effect of magnesium. Selective control of magnesium availability could be a useful strategy for inhibiting osteosarcoma cell growth

Improving flame retardancy of in-situ silica-epoxy nanocomposites cured with aliphatic hardener: Combined effect of DOPO-based flame-retardant and melamine

Silica-epoxy nanocomposites were prepared via an “in-situ ”sol-gel synthesis process and a phosphorus (P) flame-retardant i.e. 6H-dibenz[c,e][1,2]oxaphosphorin,6-[(1-oxido-2,6,7-trioxa-1-phosphabicyclo[2.2.2]oct- 4-yl)methoxy]-, 6-oxide (DP) and melamine (Mel) were further added to the matrix to improve its fire perfor- mance. The main components of epoxy resin were bisphenol A diglycidyl ether (DGEBA) and isophorone diamine (IPDA) hardener. The addition of DP as well as silica alone into the epoxy system stopped the melt dripping phe- nomena in the vertical fire test (UL 94), however, the addition of melamine was crucial for achieving the highest fire classification (UL 94-V0 rating). The presence of DP and Mel in the silica-epoxy nanocomposite promoted a large reduction (ranging from 53% up to 80%) in the heat release rate (HRR) and a delay (up to 31%) in the igni- tion time in the cone calorimetry experiments. Improved fire performance of the epoxy system was attributed to i) a condensed phase activity of silica, DP and melamine to form a protective thermal barrier during combustion and ii) a minor gas phase flame inhibition activity of DOPO component of DP. The mechanical characterization of the epoxy nanocomposites through tensile tests showed that the addition of DP increases the stiffness of the epoxy resin, resulting in a strong increase of Young modulus (up to 32%) and in a slight decrease of fracture strength, elongation at break and toughness. An increased glass transition temperature (up to 8%) of the epoxy system possibly due to hydrogen bonds and polar interactions of DP with the matrix was also observed

Influence of chitosan on the mechanical and biological properties of HDPE for biomedical applications

High density polyethylene (HDPE) is widely used in biomedical field, except when strong cell-material interactions and high mechanical properties are required. To address this pitfall, two kinds of chitosan in different amounts were used as filler in the present research. Composites were prepared by melt extrusion process and their microstructural, thermal and mechanical properties were widely investigated. Also roughness and wettability were studied, as features of paramount importance in dictating cell response. Both types of chitosan endowed HDPE with higher Young modulus and lower elongation at break. Interestingly, fibroblast adhesion and viability were enhanced when a low amount of filler was used. The interaction of HDPE/chitosan composites with biological environment was investigated for the first time in order to assess the feasibility of these composites as materials for biomedical application