Tunneling magnetoresistance in diluted magnetic semiconductor tunnel junctions

Using the spin-polarized tunneling model and taking into account the basic physics of ferromagnetic semiconductors, we study the temperature dependence of the tunneling magnetoresistance (TMR) in the diluted magnetic semiconductor (DMS) trilayer heterostructure system (Ga,Mn)As/AlAs/(Ga,Mn)As. The experimentally observed TMR ratio is in reasonable agreement with our result based on the typical material parameters. It is also shown that the TMR ratio has a strong dependence on both the itinerant-carrier density and the magnetic ion density in the DMS electrodes. This can provide a potential way to achieve larger TMR ratio by optimally adjusting the material parameters.Comment: 5 pages (RevTex), 3 figures (eps), submitted to PR

Phase transitions and magnetic domain coexistence in Nd0.5Sr0.5MnO3 thin films

We present a study of the physical properties of perovskite oxide Nd0.5Sr0.5MnO3 (NSMO) thin films grown on (110)-oriented SrTiO3 substrates. In bulk form, NSMO displays coupled magnetic and electronic transitions from paramagnetic/insulator to ferromagnetic (FM)/metal and then to antiferromagnetic (AFM)/charge-ordered insulator with decreasing temperature. In thin films, the AFM ordering only occurs when the films exist in an anisotropic strain state such as those obtained on (110)-oriented cubic substrates. In this work, resonant X-ray reflectivity, soft X-ray photoemission electron microscopy (X-PEEM), and magnetometry measurements showed that the NSMO film displays both vertical and lateral magnetic phase separation. Specifically, the film consists of three layers with different density and magnetic properties. The FM and AFM properties of the main NSMO layer were probed as a function of temperature using soft X-ray magnetic spectroscopy, and the coexistence of lateral FM and AFM domains was demonstrated at 110 K using X-PEEM

Aerodynamic Shape Optimization of an Adaptive Morphing Trailing-Edge Wing

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/140639/1/1.C033116.pd

Chitosan based fibrous absorbents for indoxyl sulfate sorption

Standard dialyzer membranes, designed for diffusive clearance, do not effectively clear protein-bound uremic toxins, such as indoxyl sulfate (IS). To increase protein-bound toxins removal, absorbents require a high specific surface area to achieve effective size-coupling removal of target toxins. However, the toxicity of a molecule is not necessarily determined by size alone. As proof of concept, we report on an electrospun polycaprolactone/chitosan (PCL/CS) fibrous absorbent for IS removal based on chemical structural interaction. A single unit (20 mm in length) of our PCL/CS absorbent achieved a 28% clearance of IS within an hour at both 40 mg/L and 5 mg/L concentrations in a single pass model. This fibrous absorbent structure offers new thoughts on absorbent design

Rapid Cycling and Exceptional Yield in a Metal-Organic Framework Water Harvester.

Sorbent-assisted water harvesting from air represents an attractive way to address water scarcity in arid climates. Hitherto, sorbents developed for this technology have exclusively been designed to perform one water harvesting cycle (WHC) per day, but the productivities attained with this approach cannot reasonably meet the rising demand for drinking water. This work shows that a microporous aluminum-based metal-organic framework, MOF-303, can perform an adsorption-desorption cycle within minutes under a mild temperature swing, which opens the way for high-productivity water harvesting through rapid, continuous WHCs. Additionally, the favorable dynamic water sorption properties of MOF-303 allow it to outperform other commercial sorbents displaying excellent steady-state characteristics under similar experimental conditions. Finally, these findings are implemented in a new water harvester capable of generating 1.3 L kgMOF -1 day-1 in an indoor arid environment (32% relative humidity, 27 °C) and 0.7 L kgMOF -1 day-1 in the Mojave Desert (in conditions as extreme as 10% RH, 27 °C), representing an improvement by 1 order of magnitude over previously reported devices. This study demonstrates that creating sorbents capable of rapid water sorption dynamics, rather than merely focusing on high water capacities, is crucial to reach water production on a scale matching human consumption

Sponge-like chitosan based porous monolith for uraemic toxins sorption

More than three million patients are treated for kidney failure world-wide. Haemodialysis, the most commonly used treatment, requires large amounts of water and generates mountains of non-recyclable plastic waste. To improve the environmental footprint, dialysis treatments need to develop absorbents to regenerate the waste dialysate. Whereas conventional dialysis clears watersoluble toxins, it is not so effective in clearing protein-bound uraemic toxins (PBUTs), such as indoxyl sulfate (IS). Thus, developing absorption devices to remove both water-soluble toxins and PBUTs would be advantageous. Vapour induced phase separation (VIPS) has been used in this work to produce polycaprolactone/chitosan (PCL/CS) composite symmetric porous monoliths with extra porous carbon additives to increase creatinine and albumin-bound IS absorption. Moreover, these easy-to-fabricate porous monoliths can be formed into the required geometry. The PCL/CS porous monoliths absorbed 436 μg/g of albumin-bound IS and 2865 μg/g of creatinine in a single-pass perfusion model within 1 h. This porous PCL/CS monolith could potentially be used to absorb uraemic toxins, including PBUTs, and thus allow the regeneration of waste dialysate and the development of a new generation of environmentally sustainable dialysis treatments, including wearable devices