62 research outputs found

    Adsorption properties and third sound propagation in superfluid 4^4He films on carbon nanotubes

    Full text link
    We consider the adsorption properties of superfluid 4^4He films on carbon nanotubes. One major factor in the adsorption is the surface tension force arising from the very small diameter of the nanotubes. Calculations show that surface tension keeps the film thickness on the tubes very thin even when the helium vapor is increased to the saturated pressure. The weakened Van der Waals force due to the cylindrical geometry also contributes to this. Both of these effects act to lower the predicted velocity of third sound propagation along the tubes. It does not appear that superfluidity will be possible on single-walled nanotubes of diameter about one nm, since the film thickness is less than 3 atomic layers even at saturation. Superfluidity is possible on larger-diameter nanotube bundles and multi-walled nanotubes, however. We have observed third sound signals on nanotube bundles of average diameter 5 nm which are sprayed onto a Plexiglass surface, forming a network of tubes.Comment: 4 pages, accepted for Journal of Physics: Conference Series (Proceedings of LT25

    Amplitude dynamics of charge density wave in LaTe3_3: theoretical description of pump-probe experiments

    Full text link
    We formulate a dynamical model to describe a photo-induced charge density wave (CDW) quench transition and apply it to recent multi-probe experiments on LaTe3_3 [A. Zong et al., Nat. Phys. 15, 27 (2019)]. Our approach relies on coupled time-dependent Ginzburg-Landau equations tracking two order parameters that represent the modulations of the electronic density and the ionic positions. We aim at describing the amplitude of the order parameters under the assumption that they are homogeneous in space. This description is supplemented by a three-temperature model, which treats separately the electronic temperature, temperature of the lattice phonons with stronger couplings to the electronic subsystem, and temperature of all other phonons. The broad scope of available data for LaTe3_3 and similar materials as well as the synergy between different time-resolved spectroscopies allow us to extract model parameters. The resulting calculations are in good agreement with ultra-fast electron diffraction experiments, reproducing qualitative and quantitative features of the CDW amplitude evolution during the initial few picoseconds after photoexcitation.Comment: 21 pages, 14 figures; this version is almost identical to the published version; comparing to the earlier arXiv submission, current version contains a new figure (Fig.10), and a broader discussion of theoretical results and approximation

    Structural contributions to the pressure-tuned charge-density-wave to superconductor transition in ZrTe3: Raman scattering studies

    Get PDF
    Superconductivity evolves as functions of pressure or doping from charge-ordered phases in a variety of strongly correlated systems, suggesting that there may be universal characteristics associated with the competition between superconductivity and charge order in these materials. We present an inelastic light (Raman) scattering study of the structural changes that precede the pressure-tuned charge-density-wave (CDW) to superconductor transition in one such system, ZrTe3. In certain phonon bands, we observe dramatic linewidth reductions that accompany CDW formation, indicating that these phonons couple strongly to the electronic degrees of freedom associated with the CDW. The same phonon bands, which represent internal vibrations of ZrTe3 prismatic chains, are suppressed at pressures above ~10 kbar, indicating a loss of long-range order within the chains, specifically amongst intrachain Zr-Te bonds. These results suggest a distinct structural mechanism for the observed pressure-induced suppression of CDW formation and provide insights into the origin of pressure-induced superconductivity in ZrTe3.Comment: 6 pages, 5 figure

    Measurement of the dynamic charge response of materials using low-energy, momentum-resolved electron energy-loss spectroscopy (M-EELS)

    Get PDF
    One of the most fundamental properties of an interacting electron system is its frequency- and wave-vector-dependent density response function, χ(q,ω)\chi({\bf q},\omega). The imaginary part, χ′′(q,ω)\chi''({\bf q},\omega), defines the fundamental bosonic charge excitations of the system, exhibiting peaks wherever collective modes are present. χ\chi quantifies the electronic compressibility of a material, its response to external fields, its ability to screen charge, and its tendency to form charge density waves. Unfortunately, there has never been a fully momentum-resolved means to measure χ(q,ω)\chi({\bf q},\omega) at the meV energy scale relevant to modern elecronic materials. Here, we demonstrate a way to measure χ\chi with quantitative momentum resolution by applying alignment techniques from x-ray and neutron scattering to surface high-resolution electron energy-loss spectroscopy (HR-EELS). This approach, which we refer to here as "M-EELS," allows direct measurement of χ′′(q,ω)\chi''({\bf q},\omega) with meV resolution while controlling the momentum with an accuracy better than a percent of a typical Brillouin zone. We apply this technique to finite-q excitations in the optimally-doped high temperature superconductor, Bi2_2Sr2_2CaCu2_2O8+x_{8+x} (Bi2212), which exhibits several phonons potentially relevant to dispersion anomalies observed in ARPES and STM experiments. Our study defines a path to studying the long-sought collective charge modes in quantum materials at the meV scale and with full momentum control.Comment: 26 pages, 10 sections, 7 figures, and an appendi

    Surface collective modes in the topological insulators Bi2_2Se3_3 and Bi0.5_{0.5}Sb1.5_{1.5}Te3−x_{3-x}Sex_{x}

    Get PDF
    We used low-energy, momentum-resolved inelastic electron scattering to study surface collective modes of the three-dimensional topological insulators Bi2_2Se3_3 and Bi0.5_{0.5}Sb1.5_{1.5}Te3−x_{3-x}Sex_{x}. Our goal was to identify the "spin plasmon" predicted by Raghu and co-workers [S. Raghu, et al., Phys. Rev. Lett. 104, 116401 (2010)]. Instead, we found that the primary collective mode is a surface plasmon arising from the bulk, free carrers in these materials. This excitation dominates the spectral weight in the bosonic function of the surface, χ"(q,ω)\chi "(\textbf{q},\omega), at THz energy scales, and is the most likely origin of a quasiparticle dispersion kink observed in previous photoemission experiments. Our study suggests that the spin plasmon may mix with this other surface mode, calling for a more nuanced understanding of optical experiments in which the spin plasmon is reported to play a role.Comment: 5 pages, 4 figure

    Anomalous density fluctuations in a strange metal.

    Get PDF
    A central mystery in high-temperature superconductivity is the origin of the so-called strange metal (i.e., the anomalous conductor from which superconductivity emerges at low temperature). Measuring the dynamic charge response of the copper oxides, [Formula: see text], would directly reveal the collective properties of the strange metal, but it has never been possible to measure this quantity with millielectronvolt resolution. Here, we present a measurement of [Formula: see text] for a cuprate, optimally doped Bi2.1Sr1.9CaCu2O8+x (Tc = 91 K), using momentum-resolved inelastic electron scattering. In the medium energy range 0.1-2 eV relevant to the strange metal, the spectra are dominated by a featureless, temperature- and momentum-independent continuum persisting to the electronvolt energy scale. This continuum displays a simple power-law form, exhibiting q2 behavior at low energy and q2/ω2 behavior at high energy. Measurements of an overdoped crystal (Tc = 50 K) showed the emergence of a gap-like feature at low temperature, indicating deviation from power law form outside the strange-metal regime. Our study suggests the strange metal exhibits a new type of charge dynamics in which excitations are local to such a degree that space and time axes are decoupled

    Influence of Ti doping on the incommensurate charge density wave in 1T-TaS2

    Get PDF
    We report temperature-dependent transport and x-ray diffraction measurements of the influence of Ti hole doping on the charge density wave (CDW) in 1T-Ta(1-x)Ti(x)S(2). Confirming past studies, we find that even trace impurities eliminate the low-temperature commensurate (C) phase in this system. Surprisingly, the magnitude of the in-plane component of the CDW wave vector in the nearly commensurate (NC) phase does not change significantly with Ti concentration, as might be expected from a changing Fermi surface volume. Instead, the angle of the CDW in the basal plane rotates, from 11.9 deg at x=0 to 16.4 deg at x=0.12. Ti substitution also leads to an extended region of coexistence between incommensurate (IC) and NC phases, indicating heterogeneous nucleation near the transition. Finally, we explain a resistive anomaly originally observed by DiSalvo [F. J. DiSalvo, et al., Phys. Rev. B {\bf 12}, 2220 (1975)] as arising from pinning of the CDW on the crystal lattice. Our study highlights the importance of commensuration effects in the NC phase, particularly at x ~ 0.08

    Evidence for topological defects in a photoinduced phase transition

    Get PDF
    Upon excitation with an intense ultrafast laser pulse, a symmetry-broken ground state can undergo a non-equilibrium phase transition through pathways dissimilar from those in thermal equilibrium. Determining the mechanism underlying these photo-induced phase transitions (PIPTs) has been a long-standing issue in the study of condensed matter systems. To this end, we investigate the light-induced melting of a unidirectional charge density wave (CDW) material, LaTe3_3. Using a suite of time-resolved probes, we independently track the amplitude and phase dynamics of the CDW. We find that a quick (∼ \sim\,1 \,ps) recovery of the CDW amplitude is followed by a slower reestablishment of phase coherence. This longer timescale is dictated by the presence of topological defects: long-range order (LRO) is inhibited and is only restored when the defects annihilate. Our results provide a framework for understanding other PIPTs by identifying the generation of defects as a governing mechanism
    • …
    corecore