Acque fenicie

una delle maggiori difficoltà per la ricostruzione della storia della religione fenicia è la perdita delle fonti letterarie di questa civiltà. Le fonti classiche e cristiane che riportano notizie sulla cultura fenicio-punica sono ideologicamente orientate e quindi da utilizzare con cautela. In questo contributo si propone un confronto tra il modo di presentare la mitologia fenicia del teologo cristiano Eusebio di Cesarea e del filosofo neoplatonico Damascio e la struttura narrativa dello scrittore francese George Pere

Root canal morphology of the mandibular second premolar: a systematic review and meta- analysis

Background: The aim of this paper was to systematically review the root canal configuration (RCC) and morphology literature of the mandibular second premolar (Mn2P). Methods: Systematic research of five electronic databases was performed to identify published literature concerning the root canal configuration (RCC) of the Mn2P up through July 2020. Studies were selected according to predefined search terms and keywords inclusion criteria: “root canal configuration”, “root canal system”, “root canal morphology”, “mandibular second premolar”, “mandibular premolars”, “morphology” and “anatomy”. Further possible studies were identified by cross-referencing and screening the bibliographies of the selected articles. Results: From 1622 retrieved studies, 44 studies investigating the internal morphology of 17,839 Mn2Ps were included. Most examined Mn2Ps were single-rooted (89.5–100%); two-rooted (0.1–8%) and three-rooted (0.1–3.5%) Mn2Ps at lower frequency. Most frequent RCCs reported were 1–1–1/1 (55.3–99.6%) followed by 1–1–2/2 (0.5–57%) and 2–2–2/2 (0.6–18%). The meta-analysis of seven studies demonstrated that a significantly higher number of RCC type 1–2–1/1 (OR [95%CI] = 2.05 [1.27, 3.33]) and 2–2–2/2 (OR [95%CI] = 2.32 [0.65, 8.63]) were observed in male than in female patients. Conclusions: Different RCC research methods have been reported. Whereas clearing and radiographs were com- monly used in the past, CBCT has been prevalent in recent years. A globally high frequency of a 1–1–1/1 RCC in the Mn2P has been reported. Nevertheless, the probability that different, more complicated RCCs can appear in Mn2Ps should not be underestimated and, thus, should be taken into consideration when making decisions during an endo- dontic treatment

Global radiant flux from active volcanoes: the 2000–2019 MIROVA database

Since 2000, the Moderate Resolution Imaging Spectroradiometer (MODIS) has acquired infrared images of the Earth’s surface daily. These data have made it possible to measure the thermal energy radiated by the world’s most famous volcanoes and also to discover and track eruptions in remote and poorly monitored regions. In this work, we present the database of Volcanic Radiative Power (VRP, in W) time series, recorded by the MIROVA (Middle Infrared Observation of Volcanic Activity) system over 2 decades of MODIS observations (2000–2019) at 111 active volcanoes. The database reveals that globally, the number of thermally active volcanoes each year varies between 60 and 80, almost equally partitioned between volcanoes with a basic (50%) and intermediate (45%) composition, while only 5% is represented by volcanoes erupting acidic lavas. Within the investigated period, the global-scale heat flux was almost stationary, and occasionally punctuated by peaks associated with the largest effusive eruptions (e.g., Bardarbunga and Kilauea). The Volcanic Radiative Energy (VRE, in J) emitted by basic volcanoes (~1.8 × 1018 J) in 20 years constitutes 91% of the total, while intermediates and acids contribute only 8% (~1.8 × 1017 J) and 1% (~1.7 × 1016 J), respectively. A comparison with the volume of lava erupted effusively by the same volcanoes reveals that this difference is attributed to the lower efficiency in radiating thermal energy of increasingly acidic (viscous) lava bodies. Each compositional group is associated with a specific relationship between VRE and erupted volume which characterises most of the effusive volcanoes. On the other hand, some open-vent volcanoes reveal that much more heat is released than that theoretically radiated by the erupted lava. This imbalance (hereby called excess radiation) is attributed to an additional heat source, likely associated with an underlying convective magma column and/or to outgassing through a permeable conduit. We are convinced that the database presented in this work will be useful to support new emerging studies on globalscale volcanism and will contribute to a better understanding of each volcanic system

Development of antigen-specific ELISA for circulating autoantibodies to extracellular matrix protein 1 in lichen sclerosus

Lichen sclerosus is a common, acquired chronic inflammatory skin disease of unknown etiology, although circulating autoantibodies to the glycoprotein extracellular matrix protein 1 (ECM1) have been detected in most patients’ sera. We have examined the nature of ECM1 epitopes in lichen sclerosus sera, developed an ELISA system for serologic diagnosis, and assessed clinicopathological correlation between ELISA titer and disease. Epitope-mapping studies revealed that lichen sclerosus sera most frequently recognized the distal second tandem repeat domain and carboxyl-terminus of ECM1. We analyzed serum autoantibody reactivity against this immunodominant epitope in 413 individuals (95 subjects with lichen sclerosus, 161 normal control subjects, and 157 subjects with other autoimmune basement membrane or sclerosing diseases). The ELISA assay was highly sensitive; 76 of 95 lichen sclerosus patients (80.0%) exhibited IgG reactivity. It was also highly specific (93.7%) in discriminating between lichen sclerosus and other disease/control sera. Higher anti-ECM1 titers also correlated with more longstanding and refractory disease and cases complicated by squamous cell carcinoma. Furthermore, passive transfer of affinity-purified patient IgG reproduced some histologic and immunopathologic features of lichen sclerosus skin. This new ELISA is valuable for the accurate detection and quantification of anti-ECM1 autoantibodies. Moreover, the values may have clinical significance in patients with lichen sclerosus

Enhanced audio-tactile multisensory interaction in a peripersonal task after echolocation.

Peripersonal space (PPS) is created by a multisensory interaction between different sensory modalities and can be modified by experience. In this article, we investigated whether an auditory training, inside the peripersonal space area, can modify the PPS around the head in sighted participants. The auditory training was based on echolocation. We measured the participant's reaction times to a tactile stimulation on the neck, while task-irrelevant looming auditory stimuli were presented. Sounds more strongly affect tactile processing when located within a limited distance from the body. We measured spatially dependent audio-tactile interaction as a proxy of PPS representation before and after an echolocation training. We found a significant speeding effect on tactile RTs after echolocation, specifically when sounds where around the location where the echolocation task was performed. This effect could not be attributed to a task repetition effect nor to a shift of spatial attention, as no changes of PPS were found in two control groups of participants, who performed the PPS task after either a break or a temporal auditory task (with stimuli located at the same position of echolocation task). These findings show that echolocation affects multisensory processing inside PPS representation, likely to better represent the space where external stimuli, have to be localized

Screening of suitable cationic dopants for solar absorber material CZTS/Se: A first principles study

The earth abundant and non-toxic solar absorber material kesterite Cu2ZnSn(S/Se)(4) has been studied to achieve high power conversion efficiency beyond various limitations, such as secondary phases, antisite defects, band gap adjustment and microstructure. To alleviate these hurdles, we employed screening based approach to find suitable cationic dopant that can promote the current density and the theoretical maximum upper limit of the energy conversion efficiency (P(%)) of CZTS/Se solar devices. For this task, the hybrid functional (Heyd, Scuseria and Ernzerhof, HSE06) were used to study the electronic and optical properties of cation (Al, Sb, Ga, Ba) doped CZTS/Se. Our in-depth investigation reveals that the Sb atom is suitable dopant of CZTS/CZTSe and also it has comparable bulk modulus as of pure material. The optical absorption coefficient of Sb doped CZTS/Se is considerably larger than the pure materials because of easy formation of visible range exciton due to the presence of defect state below the Fermi level, which leads to an increase in the current density and P(%). Our results demonstrate that the lower formation energy, preferable energy gap and excellent optical absorption of the Sb doped CZTS/Se make it potential component for relatively high efficient solar cells

Simulated Energy Savings Comparison Between Two Continuous Commissioning® Methods Applied to a Retrofitted Office Building

Continuous Commissioning® (CC®) was performed on a 24,446 square foot institutional building used primarily to house offices and conference rooms. The building was constructed in 1950, and then had a complete Heating, Ventilating, and Air Conditioning (HVAC) retrofit in 2001 to include new equipment and Direct Digital Control (DDC). Following the retrofit, CC was carried out in this building, mainly implementing outside air temperature (OAT) based temperature and static pressure reset strategies. In 2008, a second round of CC was performed (and is still in progress), which has focused on incorporating demand based reset strategies in addition to the reset strategies already in place. This paper examines the advantages of demand based reset strategies used in conjunction with outside air based reset strategies, with this building serving as a case study. In a more general sense, the building also serves as a case study of the benefits of performing multiple rounds of CC in a facility over time. Predicted energy savings from the second round of CC over the first round were reported. Since the second round of CC was still in progress as of completion of this paper, savings were predicted using simulation models developed in Energy Plus, a commercial simulation software package. Actual savings achieved from CC will be determined and presented in a 2nd paper when sufficient post-CC data have been obtained. This paper also mentions two specific challenges that were encountered and addressed during the second round of CC, including: 1) control of terminal boxes with inline electric reheat, and 2) control of a constant speed multi-zone air handling unit with zone temperature control. Recommendations were made to optimize control relative to these and other issues, in order to improve comfort and energy efficiency in the facility