17,667 research outputs found
Not Brick by Brick: Development of Interior Landmark Designation Policies in Washington , D.C.
Means and method of measuring viscoelastic strain Patent
Photographic method for measuring viscoelastic strain in solid propellants and other material
Laser Diode Induced Lighting Modules
Laser diodes have the potential of becoming the light engines of future lighting technology since they have negligible efficiency droop factor, unlike light emitting diodes. This study demonstrates the possibility of laser diodes coupled to phosphor targets being used as a solid state lighting system with high power applications. It was revealed that white light emitting modules with efficiency of up to 217 lumens per watt based on laser diodes can currently be made and upon further development of laser diode technology and relevant phosphor materials there is room for further improvements. The report also demonstrates the ability of this technology to produce a tailored emission spectrum for a given specific requirement. Two test lamp prototypes were made using laser diodes and phosphor targets and their emission characteristics were investigatedBrunel University London & EPSRC grant No. EP/K504208/
Miniature stress transducer Patent
Miniature solid state, direction sensitive, stress transducer design with bonded semiconductive piezoresistive element for sensing residual stresse
Predictive context biases perceptual selection during binocular rivalry
Prediction may be a fundamental principle of sensory processing, such that the brain continuously generates predictions about forthcoming sensory information. However, little is known about how prediction contributes to the selection of a conscious percept from among competing alternatives. Here, we used binocular rivalry to investigate the effects of prediction on perceptual selection. In binocular rivalry, incompatible images presented to the two eyes result in a perceptual alternation between the images, even though the visual stimuli remain constant. If predictive signals influence the competition between neural representations of rivalrous images, this influence should generate a bias in perceptual selection that depends on predictive context. To manipulate predictive context, we developed a novel binocular rivalry paradigm in which orthogonal rivalrous test gratings were immediately preceded by rotating gratings presented identically to the two eyes. One of the rivalrous gratings had an orientation that was consistent with the preceding rotation direction (it was the expected next image in the series), and the other had an inconsistent orientation. We found that human observers were more likely to perceive the consistent grating, suggesting that predictive context biased selection in favor of the predicted percept. This prediction effect depended on only recent stimulus history, and it could be dissociated from another stimulus history effect related to orientation-specific adaptation. Since binocular rivalry between orthogonal gratings is thought to be resolved at an early stage of visual processing, these results suggest that predictive signals may exist at low levels of the visual processing hierarchy and that these signals can bias conscious perception. In the future, this paradigm could be used to test whether visual percepts are generated from the combination of prior information and incoming sensory information according to Bayesian principles
Sound transmission testing of polymer compounds
This is the post-print version of the final paper published in Polymer Testing. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2012 Elsevier Ltd.Acoustic properties of polymer compounds are an important consideration for many applications. Currently, there are standard test methods for the determination of these properties. There is, however, no standard for the equipment used in these tests, only a specification for the test conditions. The objective of this work was to evaluate the operation and performance of a bench top laboratory sound testing system for its potential as a simple cost effective method for the initial evaluation of materials that require specific acoustic properties. The work was limited to an investigation of the property of sound transmission loss (STL). A study of the effect of the mounting conditions for the samples on the STL was carried out. Following this, a series of polymer and polymer composite samples was tested. The results presented demonstrate the potential for the testing system as an effective standard test method for the acoustic properties of polymer composites and other materials.Technology Strategy Board, U
Long-term aging of elastomers: Chemical stress relaxation of fluorosilicone rubber and other studies
Aerospace applications of elastomers are considered, including: propellant binders, bladder materials for liquid propellant expulsion systems, and fuel tank sealants for high-speed aircraft. A comprehensive molecular theory for mechanical properties of these materials has been developed but has only been tested experimentally in cases where chemical degradation processes are excluded. Hence, a study is being conducted to ascertain the nature, extent, and rate of chemical changes that take place in some elastomers of interest. Chemical changes that may take place in the fluorosilicone elastomer, LS 420, which is regarded as a fuel and high-temperature-resistant rubber are investigated. The kinetic analysis of the chemical stress relaxation and gel permeation chromatography studies comprise the major portion of the report
Within-socket Myoelectric Prediction of Continuous Ankle Kinematics for Control of a Powered Transtibial Prosthesis
Objective. Powered robotic prostheses create a need for natural-feeling user interfaces and robust control schemes. Here, we examined the ability of a nonlinear autoregressive model to continuously map the kinematics of a transtibial prosthesis and electromyographic (EMG) activity recorded within socket to the future estimates of the prosthetic ankle angle in three transtibial amputees. Approach. Model performance was examined across subjects during level treadmill ambulation as a function of the size of the EMG sampling window and the temporal \u27prediction\u27 interval between the EMG/kinematic input and the model\u27s estimate of future ankle angle to characterize the trade-off between model error, sampling window and prediction interval. Main results. Across subjects, deviations in the estimated ankle angle from the actual movement were robust to variations in the EMG sampling window and increased systematically with prediction interval. For prediction intervals up to 150 ms, the average error in the model estimate of ankle angle across the gait cycle was less than 6°. EMG contributions to the model prediction varied across subjects but were consistently localized to the transitions to/from single to double limb support and captured variations from the typical ankle kinematics during level walking. Significance. The use of an autoregressive modeling approach to continuously predict joint kinematics using natural residual muscle activity provides opportunities for direct (transparent) control of a prosthetic joint by the user. The model\u27s predictive capability could prove particularly useful for overcoming delays in signal processing and actuation of the prosthesis, providing a more biomimetic ankle response
An Inventory of Community Wellness Programs in Biddeford, Maine
This report highlights wellness initiatives from the perspective of two population segments: those with chronic condition, or those who may be at risk for chronic conditions, and high-risk populations, which this project defines as those living below the federal poverty level who engage in behaviors that potentially lead to avoidable health problems. The rationale was that these groups require extensive resources and that it would be easier to identify gaps in community wellness support for these populations
- …