Iron Oxide/Chitosan Magnetic Nanocomposite Immobilized Manganese Peroxidase for Decolorization of Textile Wastewater

Because of its effectiveness in organic pollutant degradation, manganese peroxidase (MnP) enzyme has attracted significant attention in recent years regarding its use for wastewater treatment. Herein, MnP was extracted from Anthracophyllum discolor fungi and immobilized on the surface of magnetic nanocomposite Fe3O4/chitosan. The prepared nanocomposite offered a high surface area for MnP immobilization. The influence of several environmental factors like temperature, pH, as well as storage duration on the activity of the extracted enzyme has been studied. Fourier transmission infrared spectroscopy (FT-IR), scanning electron microscope (SEM), X-ray diffraction (XRD), and transmission electron microscope (TEM) techniques were used for the characterization of the prepared MnP/Fe3O4/chitosan nanocomposite. The efficiencies of the prepared MnP/Fe3O4/chitosan nanocomposite for the elimination of reactive orange 16 (RO 16) and methylene blue (MB) industrial dyes were determined. According to the results, the immobilization of MnP on Fe3O4/chitosan nanocomposite increases its capacity to decolorize MB and RO 16. This nanocomposite allowed the removal of 96% ± 2% and 98% ± 2% of MB and RO 16, respectively. The reusability of the synthesized nanocomposite was studied for five successive cycles showing the ability to retain its efficiency even after five cycles. Thus, the prepared MnP/Fe3O4/chitosan nanocomposite has potential to be a promising material for textile wastewater bioremediation

Effective Heavy Metals Removal from Water Using Nanomaterials: A Review

The discharge of toxic heavy metals including zinc (Zn), nickel (Ni), lead (Pb), copper (Cu), chromium (Cr), and cadmium (Cd) in water above the permissible limits causes high threat to the surrounding environment. Because of their toxicity, heavy metals greatly affect the human health and the environment. Recently, better remediation techniques were offered using the nanotechnology and nanomaterials. The attentions were directed toward cost-effective and new fabricated nanomaterials for the application in water/wastewater remediation, such as zeolite, carbonaceous, polymer based, chitosan, ferrite, magnetic, metal oxide, bimetallic, metallic, etc. This review focused on the synthesis and capacity of various nanoadsorbent materials for the elimination of different toxic ions, with discussion of the effect of their functionalization on the adsorption capacity and separation process. Additionally, the effect of various experimental physicochemical factors on heavy metals adsorption, such as ionic strength, initial ion concentration, temperature, contact time, adsorbent dose, and pH was discussed

Comparative Study of Natural Radioactivity and Radiological Hazard Parameters of Various Imported Tiles Used for Decoration in Sudan

Various commercially imported ceramic materials used in the building of Sudanese dwellings were examined in order to determine their natural radioactivity and radiological hazard parameters. In this context, twenty-five different consignments were sampled and analyzed using (3″ × 3″) sodium iodide gamma spectrometry system NaI(Tl). The identified average activity concentrations of 238U, 232Th, and 40K were 183 ± 70, 51 ± 44, and 238 ± 77 Bq/kg dry-weights, respectively. A positive correlation between 238U and 232Th in the investigated samples was identified from the observed significant correlation (R2 = 0.8). Interestingly, a low Th/U ratio (~0.3) was recorded, which could be related to the systematic loss of thorium during the fabrication process. The measured activity concentrations for these radionuclides were comparable with the reported data obtained from similar materials used in other countries showing similarity in ceramic materials used in buildings. Five different radiation indices, such as the average radium equivalent (Raeq), the absorbed dose rate (D), the annual effective dose equivalent (AEDE), the external hazard index (Hex), and the radioactivity level index (lγ), which indicate hazardous radiation, were estimated from these measurements. The obtained results revealed average values of 274 ± 106 Bq/kg, 125 ± 48 nGy/h, 1.23 ± 0.48 mSv/y, 0.74 ± 0.29, and 0.94 ± 0.37, for Raeq, D, AEDE, Hex, and lγ, respectively. The mean values of Raeq and Hex were in good agreement with the international limits, while the means of D and lγ were higher than the universal values. Calculated AEDE in about 60% of the samples exceeded the universal limit of 1 mSv/y for the public exposure (maximum value of 2.16 mSv/y). The investigated parameters were in the same range for the majority of imported samples; however, they were slightly higher than the locally produced ceramic, highlighting the importance of monitoring imported materials for their radioactivity contents

Multi-Physical Model for Sizing Optimization of Electrical Machines

International audienc

First Report of Natural Infection of Least Weasel (Mustela nivalis Linnaeus, 1776) with Leishmania major in Tunisia

International audienceZoonotic cutaneous leishmaniasis, caused by Leishmania major (L. major), is endemic in Tunisia. Several rodents have been identified as reservoir hosts of parasites. This study reports, for the first time, the natural infection with L. major zymodeme MON-25 in a specimen of least weasel: Mustela nivalis Linnaeus, 1776 (M. nivalis) collected in Sidi Bouzid. This finding justifies further research on larger samples of this animal to verify its role as a potential reservoir host for cutaneous leishmaniasis in Tunisia