Static grain growth in an austenitic stainless steel subjected to intense plastic straining

The post-dynamic recrystallization of an ultrafine grained 304-type austenitic stainless steel was studied during annealing at 800 and 1000°C for 7.5 to 480 minutes. The initial ultrafine grained microstructures have been developed by continuous dynamic recrystallization during isothermal multidirectional forging to a total strain of ~4 at temperatures ranging from 500 to 800°C. The post-dynamic recrystallization involves a rapid softening at early stage of annealing followed by a sluggish decrease of hardness upon further annealing. A transient recrystallization at early annealing stage results in somewhat heterogeneous microstructures in the samples subjected to previous deformation at relatively low temperatures of 500-600°C. This structural heterogeneity disappears with increasing the annealing tim

Microstructure and mechanical properties of austenitic stainless steels after dynamic and post-dynamic recrystallization treatment

The effects of dynamic and post-dynamic recrystallization (DRX and post-DRX) on the microstructure and mechanical properties of austenitic stainless steels are critically reviewed. Particularly, the paper is focused on the grain refinement and strengthening by large strain deformation including severe plastic deformation conditions. The DRX and post-DRX microstructures are considered with close relation to the operative recrystallization mechanism

Properties of bright squeezed vacuum at increasing brightness

A bright squeezed vacuum (BSV) is a nonclassical macroscopic state of light, which is generated through high-gain parametric down-conversion or four-wave mixing. Although the BSV is an important tool in quantum optics and has a lot of applications, its theoretical description is still not complete. In particular, the existing description in terms of Schmidt modes with gain-independent shapes fails to explain the spectral broadening observed in the experiment as the mean number of photons increases. Meanwhile, the semiclassical description accounting for the broadening does not allow us to decouple the intermodal photon-number correlations. In this work, we present a new generalized theoretical approach to describe the spatial properties of a multimode BSV. In the multimode case, one has to take into account the complicated interplay between all involved modes: each plane-wave mode interacts with all other modes, which complicates the problem significantly. The developed approach is based on exchanging the (k, t ) and (ω, z) representations and solving a system of integrodifferential equations. Our approach predicts correctly the dynamics of the Schmidt modes and the broadening of the angular distribution with the increase in the BSV mean photon number due to a stronger pumping. Moreover, the model correctly describes various properties of a widely used experimental configuration with two crystals and an air gap between them, namely, an SU(1,1) interferometer. In particular, it predicts the narrowing of the intensity distribution, the reduction and shift of the side lobes, and the decline in the interference visibility as the mean photon number increases due to stronger pumping. The presented experimental results confirm the validity of the new approach. The model can be easily extended to the case of the frequency spectrum, frequency Schmidt modes, and other experimental configurations

Kinetics of grain refinemet in metallic materials during large strain deformation

The development of ultrafine grained microstructures in austenitic stainless steel and pure titanium subjected to large strain deformation was comparatively studied. The change in the volume fractions of newly developed ultrafine grains was used to quantify the progress in grain refinement during plastic deformatio

Dynamically recrystallized microstructures, textures, and tensile properties of a hot worked high-Mn steel

The deformation microstructures and mechanical properties were studied in a high-Mn steel subjected to hot compression. The deformation microstructures resulted from the development of dynamic recrystallization (DRX). Two DRX mechanisms, namely discontinuous and continuous, operated during warm-to-hot workin