Epidemiology of oral candidiasis in HIV-infected patients: Colonization, infection, treatment, and emergence of fluconazole resistance

: To study the epidemiology of oral candidiasis and the effect of treatment of thrush in human immunodeficiency virus (HIV)-infected patients.: We conducted a prospective observational study of 92 patients over 1 year, including a nonblinded, randomized treatment trial of thrush with clotrimazole troches or oral fluconazole. Oral sites were cultured monthly and when thrush occurred. Candida albicans strains were typed by contour-clamped homogeneous electric field (CHEF) electrophoresis. Changes in strains were evaluated over time and in regard to their associations with particular sites, episodes of thrush, relapse after treatment, and colonization of sexual partners. Susceptibility to fluconazole was tested and CHEF analysis was done on these strains to determine the epidemiology of fluconazole resistance.: Yeasts colonized 84% of patients. C albicans accounted for 81% of all isolates and was separated into 34 distinct strains. Most patients had persistent carriage of 1 or 2 dominant strains of C albicans. Three couples shared strains. Nineteen different C albicans strains caused 82 episodes of thrush in 45 patients. CD4 Torulopsis glabrata and Saccharomyces cerevisiae increased after treatment with either drug, but these organisms were never a sole cause of thrush. In a subset of 35 patients followed for over 3 months in whom fluconazole susceptiblities were performed, minimum inhibitory concentrations (MICs) to fluconazole increased only in those on fluconazole prophylaxis. Clinical failure of fluconazole was associated with an MIC >= 64 [mu]g/mL in 3 patients, and with an MIC of 8 [mu]g/mL in 1 patient. In 2 of these 4 patients, the prior colonizing strain developed fluconazole resistance. In the other 2, new resistant strains were acquired.: Many different strains of C albicans colonize and cause thrush in patients infected with HIV. Patients are usually persistently colonized with a single strain, and recurrences following treatment are usually due to the same strain. Transmission of strains may occur between couples. Fluconazole and clotrimazole are equally effective in treating thrush, but mycologic cure occurs more often with fluconazole.Fluconazole resistance in C albicans occurs most often in patients who have low CD4 counts and are taking fluconazole prophylactically for recurrent thrush. Fluconazole resistance may occur through acquisition of a new resistant strain or by development of resistance in a previously susceptible strain.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/31920/1/0000873.pd

Toward shared decision-making in degenerative cervical myelopathy: Protocol for a mixed methods study

Health care decisions are a critical determinant in the evolution of chronic illness. In shared decision-making (SDM), patients and clinicians work collaboratively to reach evidence-based health decisions that align with individual circumstances, values, and preferences. This personalized approach to clinical care likely has substantial benefits in the oversight of degenerative cervical myelopathy (DCM), a type of nontraumatic spinal cord injury. Its chronicity, heterogeneous clinical presentation, complex management, and variable disease course engenders an imperative for a patient-centric approach that accounts for each patient's unique needs and priorities. Inadequate patient knowledge about the condition and an incomplete understanding of the critical decision points that arise during the course of care currently hinder the fruitful participation of health care providers and patients in SDM. This study protocol presents the rationale for deploying SDM for DCM and delineates the groundwork required to achieve this. The study's primary outcome is the development of a comprehensive checklist to be implemented upon diagnosis that provides patients with essential information necessary to support their informed decision-making. This is known as a core information set (CIS). The secondary outcome is the creation of a detailed process map that provides a diagrammatic representation of the global care workflows and cognitive processes involved in DCM care. Characterizing the critical decision points along a patient's journey will allow for an effective exploration of SDM tools for routine clinical practice to enhance patient-centered care and improve clinical outcomes. Both CISs and process maps are coproduced iteratively through a collaborative process involving the input and consensus of key stakeholders. This will be facilitated by Myelopathy.org, a global DCM charity, through its Research Objectives and Common Data Elements for Degenerative Cervical Myelopathy community. To develop the CIS, a 3-round, web-based Delphi process will be used, starting with a baseline list of information items derived from a recent scoping review of educational materials in DCM, patient interviews, and a qualitative survey of professionals. A priori criteria for achieving consensus are specified. The process map will be developed iteratively using semistructured interviews with patients and professionals and validated by key stakeholders. Recruitment for the Delphi consensus study began in April 2023. The pilot-testing of process map interview participants started simultaneously, with the formulation of an initial baseline map underway. This protocol marks the first attempt to provide a starting point for investigating SDM in DCM. The primary work centers on developing an educational tool for use in diagnosis to enable enhanced onward decision-making. The wider objective is to aid stakeholders in developing SDM tools by identifying critical decision junctures in DCM care. Through these approaches, we aim to provide an exhaustive launchpad for formulating SDM tools in the wider DCM community. DERR1-10.2196/46809. [Abstract copyright: ©Irina Sangeorzan, Grazia Antonacci, Anne Martin, Ben Grodzinski, Carl M Zipser, Rory K J Murphy, Panoraia Andriopoulou, Chad E Cook, David B Anderson, James Guest, Julio C Furlan, Mark R N Kotter, Timothy F Boerger, Iwan Sadler, Elizabeth A Roberts, Helen Wood, Christine Fraser, Michael G Fehlings, Vishal Kumar, Josephine Jung, James Milligan, Aria Nouri, Allan R Martin, Tammy Blizzard, Luiz Roberto Vialle, Lindsay Tetreault, Sukhvinder Kalsi-Ryan, Anna MacDowall, Esther Martin-Moore, Martin Burwood, Lianne Wood, Abdul Lalkhen, Manabu Ito, Nicky Wilson, Caroline Treanor, Sheila Dugan, Benjamin M Davies. Originally published in JMIR Research Protocols (https://www.researchprotocols.org), 09.10.2023.

Computer-assisted and patient-specific 3-D planning and evaluation of a single-cut rotational osteotomy for complex long-bone deformities

Malunion after long bone fracture results in an incorrect position of the distal bone segment. This misalignment may lead to reduced function of the limb, early osteoarthritis and chronic pain. An established treatment option is a corrective osteotomy. For complex malunions, a single-cut rotational osteotomy is sometimes preferred in cases of angular deformity in three dimensions. However, planning and performing this type of osteotomy is relatively complex. This report describes a computer-assisted method for 3-D planning and realizing a single-cut rotational osteotomy with a patient-specific cutting guide for orienting the osteotomy and an angled jig for adjusting the rotation angle. The accuracy and reproducibility of the method is evaluated experimentally using plastic bones. In addition, complex rotational deformities are simulated by a computer to investigate the relation between deformity and correction parameters. The computed relation between deformity and correction parameters enables the surgeon to judge the feasibility of a single-cut rotational osteotomy. This appears possible for deformities combining axial misalignment with sufficient axial rotation. The proposed 3-D method of preoperative planning and transfer with a patient-specific cutting guide and angled jig renders the osteotomy procedure easily applicable, accurate, reproducible, and is a good alternative for complex and expensive navigation systems

Toward Shared Decision-Making in Degenerative Cervical Myelopathy: Protocol for a Mixed Methods Study

BACKGROUND Health care decisions are a critical determinant in the evolution of chronic illness. In shared decision-making (SDM), patients and clinicians work collaboratively to reach evidence-based health decisions that align with individual circumstances, values, and preferences. This personalized approach to clinical care likely has substantial benefits in the oversight of degenerative cervical myelopathy (DCM), a type of nontraumatic spinal cord injury. Its chronicity, heterogeneous clinical presentation, complex management, and variable disease course engenders an imperative for a patient-centric approach that accounts for each patient's unique needs and priorities. Inadequate patient knowledge about the condition and an incomplete understanding of the critical decision points that arise during the course of care currently hinder the fruitful participation of health care providers and patients in SDM. This study protocol presents the rationale for deploying SDM for DCM and delineates the groundwork required to achieve this. OBJECTIVE The study's primary outcome is the development of a comprehensive checklist to be implemented upon diagnosis that provides patients with essential information necessary to support their informed decision-making. This is known as a core information set (CIS). The secondary outcome is the creation of a detailed process map that provides a diagrammatic representation of the global care workflows and cognitive processes involved in DCM care. Characterizing the critical decision points along a patient's journey will allow for an effective exploration of SDM tools for routine clinical practice to enhance patient-centered care and improve clinical outcomes. METHODS Both CISs and process maps are coproduced iteratively through a collaborative process involving the input and consensus of key stakeholders. This will be facilitated by Myelopathy.org, a global DCM charity, through its Research Objectives and Common Data Elements for Degenerative Cervical Myelopathy community. To develop the CIS, a 3-round, web-based Delphi process will be used, starting with a baseline list of information items derived from a recent scoping review of educational materials in DCM, patient interviews, and a qualitative survey of professionals. A priori criteria for achieving consensus are specified. The process map will be developed iteratively using semistructured interviews with patients and professionals and validated by key stakeholders. RESULTS Recruitment for the Delphi consensus study began in April 2023. The pilot-testing of process map interview participants started simultaneously, with the formulation of an initial baseline map underway. CONCLUSIONS This protocol marks the first attempt to provide a starting point for investigating SDM in DCM. The primary work centers on developing an educational tool for use in diagnosis to enable enhanced onward decision-making. The wider objective is to aid stakeholders in developing SDM tools by identifying critical decision junctures in DCM care. Through these approaches, we aim to provide an exhaustive launchpad for formulating SDM tools in the wider DCM community. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID) DERR1-10.2196/46809

The sinus tarsi approach in displaced intra-articular calcaneal fractures: a systematic review

Purpose: Although open reduction and internal fixation is currently considered the gold standard in surgical treatment of displaced intra-articular calcaneal fractures, various different approaches exist including the limited lateral approach. The aim of this systematic review was to combine the results of studies using the sinus tarsi approach, which is the most frequently applied limited lateral approach. Method: A literature search in the electronic databases of the Cochrane Library and Pubmed Medline, between January 1st 2000 to December 1st 2010, was conducted to identify studies in which the sinus tarsi approach or a modified sinus tarsi approach was utilized for the treatment of displaced intra-articular calcaneal fractures. The methodological quality of the included studies was assessed using the Coleman methodology score. Results: A total of eight case series reporting on 256 patients with 271 calcaneal fractures was identified. Overall good to excellent outcome was reached in three-quarters of all patients. An average complication rate of minor wound complications of 4.1% was reported and major wound complications in 0.7%. The need for a secondary subtalar arthrodesis occurred at an average rate of 4.3%. The average Coleman methodology score was 56.8 (range 39-72) points. Conclusion: The results, i.e. functional outcome and complication rates, of the sinus tarsi approach compare similarly or favourably to the extended lateral approach. Therefore, in the process of tailoring the best treatment modality to the right patient and the right fracture type, the sinus tarsi approach might be a valuable asset

Validity of contour-clamped homogeneous electric field electrophoresis as a typing system for Candida albicans

Instigated by an increase in serious human Candida infections and aided by advances in technology, there has been renewed interest in the study of the epidemiology of fungal infections. Among the newer techniques available, contourclamped homogeneous electric field (CHEF) electrophoresis has shown great promise as a tool for typing strains of Candida albicans . However, few studies have addressed the reproducibility of the preparatory and electrophoretic methods. Through a series of analyses on clinical isolates of C. albicans , we were able to demonstrate that (a) sample preparation induced no appreciable artifacts in CHEF banding patterns; (b) the electrophoretic patterns were reproducible over time; (c) changes in colony morphology were not associated with changes in the electrophoretic pattern, and (d) the method was more sensitive than restriction enzyme analysis (REA) for demonstrating strain differences. CHEF electrophoresis is a sensitive and reproducible tool for the study of Candida epidemiology. Further use and study of this methodology is warranted. Zusammenfassung . Die Zunahme schwerer Candida -Infektionen sowie technologische Fortschritte haben das Interesse an der Epidemiologie von Pilzinfektionen neu belebt. Unter den neueren Techniken hat sich die CHEF-Pulsfeldelektrophorese als vielversprechendes Werkzeug zur Stammtypisierung von Candida albicans herausgestellt. Bisher sind jedoch nur wenige Studien zur Reproduzierbarkeit der prÄparativen und elektrophoretischen Methoden gemacht worden. Mittels einer Serie von Analysen klinischer C. albicans -Isolate waren wir in der Lage zu zeigen, daß (a) die ProbenprÄparation keine wesentlichen Artefakte im CHEF-Bandenmuster hervorruft, daß (b) die elektrophoretischen Muster wiederholt reproduzierbar waren, daß (c) VerÄnderungen in der Koloniemorphologie nicht mit VerÄnderungen in den elektrophoretischen Mustern verbunden waren und daß (d) die Methode empfindlicher war als die Restriktionsenzym-Analyse (REA) fÜr das Aufdecken von Stammunterschieden. Die CHEF-Pulsfeldelektrophorese ist ein empfindliches und reproduzierbares Verfahren fÜr Studien zur Candida -Epidemiologie. Der weitere Einsatz und weitere Untersuchungen mit dieser Methode bieten sich an.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73028/1/j.1439-0507.1995.tb00005.x.pd