228 research outputs found
Water Resources
Water resources survey, management, and control by means of ERTS-1 data - Conferenc
Summary of the Operational Applications of Satellite Snowcover Observations Working Session, 20 August 1975
Various techniques for reducing the satellite data to a form usable by the operational agencies were covered in mini-presentations by the operational satellite snow interpretive personnel. Similar discussions were made by operational agency stream flow forecasters on how satellite-derived snow data could be incorporated into runoff forecasting methods
Extraction and utilization of space acquired physiographic data for water resources development
ERTS-1 satellite imagery was evaluated as a means of providing useful watershed physiography information. From these data physiographic parameters such as drainage basin area and shape, drainage density, stream length and sinuosity, and the percentage of a watershed occupied by major land use types were obtained in three study areas. The study areas were: (1) Southwestern Wisconsin; (2) Eastern Colorado, and (3) portions of the Middle Atlantic States. Using ERTS-1 imagery at 1:250,000 and 1:100,000 scales it was found that drainage basin area and shape and stream sinuosity were comparable (within 10%) in all study areas to physiographic measurements derived from conventional topographic maps at the same scales
Current Algebra and Conformal Field Theory on a Figure Eight
We examine the dynamics of a free massless scalar field on a figure eight
network. Upon requiring the scalar field to have a well defined value at the
junction of the network, it is seen that the conserved currents of the theory
satisfy Kirchhoff's law, that is that the current flowing into the junction
equals the current flowing out. We obtain the corresponding current algebra and
show that, unlike on a circle, the left- and right-moving currents on the
figure eight do not in general commute in quantum theory. Since a free scalar
field theory on a one dimensional spatial manifold exhibits conformal symmetry,
it is natural to ask whether an analogous symmetry can be defined for the
figure eight. We find that, unlike in the case of a manifold, the action plus
boundary conditions for the network are not invariant under separate conformal
transformations associated with left- and right-movers. Instead, the system is,
at best, invariant under only a single set of transformations. Its conserved
current is also found to satisfy Kirchhoff's law at the junction. We obtain the
associated conserved charges, and show that they generate a Virasoro algebra.
Its conformal anomaly (central charge) is computed for special values of the
parameters characterizing the network.Comment: 39 pages; Latex with 1 figure included in encapsulated postscript
format. psbox.tex require
Integrals over Products of Distributions and Coordinate Independence of Zero-Temperature Path Integrals
In perturbative calculations of quantum-statistical zero-temperature path
integrals in curvilinear coordinates one encounters Feynman diagrams involving
multiple temporal integrals over products of distributions, which are
mathematically undefined. In addition, there are terms proportional to powers
of Dirac delta-functions at the origin coming from the measure of path
integration. We give simple rules for integrating products of distributions in
such a way that the results ensure coordinate independence of the path
integrals. The rules are derived by using equations of motion and partial
integration, while keeping track of certain minimal features originating in the
unique definition of all singular integrals in dimensions. Our
rules yield the same results as the much more cumbersome calculations in 1-
epsilon dimensions where the limit epsilon --> 0 is taken at the end. They also
agree with the rules found in an independent treatment on a finite time
interval.Comment: Author Information under
http://www.physik.fu-berlin.de/~kleinert/institution.html . Latest update of
paper (including all PS fonts) at
http://www.physik.fu-berlin.de/~kleinert/33
L-band radar sensing of soil moisture
The performance of an L-band, 25 cm wavelength imaging synthetic aperture radar was assessed for soil moisture determination, and the temporal variability of radar returns from a number of agricultural fields was studied. A series of three overflights was accomplished over an agricultural test site in Kern County, California. Soil moisture samples were collected from bare fields at nine sites at depths of 0-2, 2-5, 5-15, and 15-30 cm. These gravimetric measurements were converted to percent of field capacity for correlation to the radar return signal. The initial signal film was optically correlated and scanned to produce image data numbers. These numbers were then converted to relative return power by linear interpolation of the noise power wedge which was introduced in 5 dB steps into the original signal film before and after each data run. Results of correlations between the relative return power and percent of field capacity (FC) demonstrate that the relative return power from this imaging radar system is responsive to the amount of soil moisture in bare fields. The signal returned from dry (15% FC) and wet (130% FC) fields where furrowing is parallel to the radar beam differs by about 10 dB
The Nimbus 4 Infrared Spectroscopy Experiment, IRIS-D. Part 1: Calibrated Thermal Emission Spectra
Calibrated infrared emission spectra of earth and atmosphere using high resolution interferometer spectrophotometer on Nimbus 4 satellit
MODIS information, data and control system (MIDACS) operations concepts
The MODIS Information, Data, and Control System (MIDACS) Operations Concepts Document provides a basis for the mutual understanding between the users and the designers of the MIDACS, including the requirements, operating environment, external interfaces, and development plan. In defining the concepts and scope of the system, how the MIDACS will operate as an element of the Earth Observing System (EOS) within the EosDIS environment is described. This version follows an earlier release of a preliminary draft version. The individual operations concepts for planning and scheduling, control and monitoring, data acquisition and processing, calibration and validation, data archive and distribution, and user access do not yet fully represent the requirements of the data system needed to achieve the scientific objectives of the MODIS instruments and science teams. The teams are not yet formed; however, it is possible to develop the operations concepts based on the present concept of EosDIS, the level 1 and level 2 Functional Requirements Documents, and through interviews and meetings with key members of the scientific community. The operations concepts were exercised through the application of representative scenarios
15 Years of Aqua MODIS On-Orbit Operation, Calibration, and Performance
Since launch on May 04, 2002, Aqua MODIS has successfully operated for 15 years and continuously produced from its observations many data products in support of a broad range of scientific research activities and applications. Its overall mission success has relied heavily on the dedicated efforts to operate and calibrate the instrument and to track and correct on-orbit changes in sensor responses. This paper provides an overview of Aqua MODIS instrument operation and calibration activities, algorithm improvements, and look-up-table (LUT) updates. Results derived from various on-orbit calibration targets are presented to demonstrate sensor long-term performance. Also discussed in this paper are challenging issues identified and future efforts to maintain instrument calibration and data quality
MODIS information, data and control system (MIDACS) level 2 functional requirements
The MODIS Information, Data and Control System (MIDACS) Level 2 Functional Requirements Document establishes the functional requirements for MIDACS and provides a basis for the mutual understanding between the users and the designers of the EosDIS, including the requirements, operating environment, external interfaces, and development plan. In defining the requirements and scope of the system, this document describes how MIDACS will operate as an element of the EOS within the EosDIS environment. This version of the Level 2 Requirements Document follows an earlier release of a preliminary draft version. The sections on functional and performance requirements do not yet fully represent the requirements of the data system needed to achieve the scientific objectives of the MODIS instruments and science teams. Indeed, the team members have not yet been selected and the team has not yet been formed; however, it has been possible to identify many relevant requirements based on the present concept of EosDIS and through interviews and meetings with key members of the scientific community. These requirements have been grouped by functional component of the data system, and by function within each component. These requirements have been merged with the complete set of Level 1 and Level 2 context diagrams, data flow diagrams, and data dictionary
- …