Bearing servicing tool

A tool for removing and/or replacing bearings in situ is presented. The tool is comprised of a brace having a first end adapted to engage a first end of the bearing housing, and a second end adapted to engage a second end of the bearing housing. If the two ends of the bearing housing are different in configuration, then the respective ends of the brace are configured accordingly. An elongate guide member integral with the brace has two parts, each projecting endwise from a respective end of the brace. A removable pressure plate can be mounted on either part of the guide member for longitudinal movement therealong and has first and second ends of different configurations adapted to engage the first and second ends of the bearing. A threaded-type drive is cooperative between the guide and the pressure plate to move the pressure plate longitudinally along the guide and apply a force to the bearing, either to remove the bearing from its housing, or to emplace a new bearing in the housing

Interference effects during burning in air for stationary n-heptane, ethyl alcohol, and methyl alcohol droplets

Experiments have been conducted for the determination of the evaporation constant and flame shapes of two and of five closely spaced droplets burning in air. Droplets of approximately the same and of different diameters were used at various distances between the droplet centers. The apparent flame shape, which was observed only for n-heptane droplets, changes very little during burning. The square of the droplet diameter decreases linearly with time for fixed spacing between droplet centers, at least within the experimental limits of accuracy. In general, the average evaporation constant for two droplets, K', must be assumed either to vary continuously during burning or else to be a function of average initial drop diameter, D^0. The change of K' with time corresponds to the second derivative in plots of the square of the diameter vs. time. These second derivatives are not defined in our work because of unavoidable scatter of the experimental data. Attempts at understanding the observed results by considering published theories for single droplets, as well as groupings obtained from dimensional analysis, have been unsuccessful. It appears that the diffusion model for the heterogeneous burning of single fuel droplets will require serious revision and extension before the burning of droplets arrays and sprays can be understood quantitatively. Furthermore, the effective value of K' for a spray probably depends not only on the fuel-oxidizer system but also on the injection pattern. For this reason additional studies had best be carried out under conditions corresponding to those existing in service models

Dependency and Hegemony in Neoliberal South Africa

This article is about South Africa in the post-apartheid period. It has two aspects; first it examines the social and political process through which the African National Congress (ANC) shifted its emphasis away from the construction of the nationalist project (as defined by its 1955 Freedom Charter), towards a world view that privileges markets as the main organising mechanisms in society. Inevitably, accompanying this shift to neoliberalism there has been a corresponding surrender of macroeconomic economic policy autonomy. Such policy is now geared to propitiating global markets that periodically exhibit high degrees of instability. The question arises – how is the ANC able to manage two diametrically opposed tendencies without social upheaval and dislocation? The answers proffered here centres on hegemonic and dependency dynamics that are in motion in contemporary South Africa

Toughened uni-piece fibrous insulation

A porous body of fibrous, low density silica-based insulation material is at least in part impregnated with a reactive boron oxide containing borosilicate glass frit, a silicon tetraboride fluxing agent and a molybdenum silicide emittance agent. The glass frit, fluxing agent and emittance agent are separately milled to reduce their particle size, then mixed together to produce a slurry in ethanol. The slurry is then applied to the insulation material and sintered to produce the porous body