Knife- Versus Abrasive-Planed Wood: Quality of Adhesive Bonds

Glueline strength and durability were determined for abrasive- versus knife-planed wood surfaces. Laminated beam sections were made, 16 each of southern pine and Douglas-fir, using 4 surfacing treatments prior to laminating. The four treatments were knife planing, and abrasive planing with 36, 60, and 80 grit. Comparisons were made of resistance to glueline separation after accelerated aging, of bond shear strength, and of percentage wood failure within a species group.Under microscopic examination, abrasive planing showed crushing and tearing of the wood surface, whereas knife planing showed a clean-cut surface. Gluelines with abrasive-planed surfaces were similar to the knife-planed in shear strength, were higher in percentage of wood failure, and lower in resistance to glueline separation upon accelerated aging

Photoacoustic Imaging for Noninvasive Periodontal Probing Depth Measurements.

The periodontal probe is the gold standard tool for periodontal examinations, including probing depth measurements, but is limited by systematic and random errors. Here, we used photoacoustic ultrasound for high-spatial resolution imaging of probing depths. Specific contrast from dental pockets was achieved with food-grade cuttlefish ink as a contrast medium. Here, 39 porcine teeth (12 teeth with artificially deeper pockets) were treated with the contrast agent, and the probing depths were measured with novel photoacoustic imaging and a Williams periodontal probe. There were statistically significant differences between the 2 measurement approaches for distal, lingual, and buccal sites but not mesial. Bland-Altman analysis revealed that all bias values were < ±0.25 mm, and the coefficients of variation for 5 replicates were <11%. The photoacoustic imaging approach also offered 0.01-mm precision and could cover the entire pocket, as opposed to the probe-based approach, which is limited to only a few sites. This report is the first to use photoacoustic imaging for probing depth measurements with potential implications to the dental field, including tools for automated dental examinations or noninvasive examinations

Design, theory, and measurement of a polarization insensitive absorber for terahertz imaging

We present the theory, design, and realization of a polarization-insensitive metamaterial absorber for terahertz frequencies. We derive geometrical-independent conditions for effective medium absorbers in general, and for resonant metamaterials specically. Our fabricated design reaches and absorptivity of 78% at 1.145 ThzComment: 6 Pages, 5 figures; figures update

Circulating Biomarkers to Identify Responders in Cardiac Cell therapy.

Bone marrow mononuclear cell (BM-MNC) therapy in ST-elevation acute myocardial infarction (STEMI) has no biological inclusion criteria. Here, we analyzed 63 biomarkers and cytokines in baseline plasma samples from 77 STEMI patients treated with BM-MNCs in the TIME and Late-TIME trials as well as 61 STEMI patients treated with placebo. Response to cell therapy was defined by changes in left ventricular ejection fraction, systolic/diastolic volumes, and wall motion indexes. We investigated the clinical value of circulating proteins in outcome prediction using significance testing, partial least squares discriminant analysis, and receiver operating characteristic (ROC) analysis. Responders had higher biomarker levels (76-94% elevated) than non-responders. Several biomarkers had values that differed significantly (P < 0.05) between responders and non-responders including stem cell factor, platelet-derived growth factor, and interleukin-15. We then used these lead candidates for ROC analysis and found multiple biomarkers with values areas under the curve >0.70 including interleukin 15. These biomarkers were not involved in the placebo-treated subjects suggesting that they may have predictive power. We conclude that plasma profiling after STEMI may help identify patients with a greater likelihood of response to cell-based treatment. Prospective trials are needed to assess the predictive value of the circulating biomarkers

Cancer-selective, single agent chemoradiosensitising gold nanoparticles

Two nanometre gold nanoparticles (AuNPs), bearing sugar moieties and/or thiol-polyethylene glycol-amine (PEG-amine), were synthesised and evaluated for their in vitro toxicity and ability to radiosensitise cells with 220 kV and 6 MV X-rays, using four cell lines representing normal and cancerous skin and breast tissues. Acute 3 h exposure of cells to AuNPs, bearing PEG-amine only or a 50:50 ratio of alpha-galactose derivative and PEG-amine resulted in selective uptake and toxicity towards cancer cells at unprecedentedly low nanomolar concentrations. Chemotoxicity was prevented by co-administration of N-acetyl cysteine antioxidant, or partially prevented by the caspase inhibitor Z-VAD-FMK. In addition to their intrinsic cancer-selective chemotoxicity, these AuNPs acted as radiosensitisers in combination with 220 kV or 6 MV X-rays. The ability of AuNPs bearing simple ligands to act as cancer-selective chemoradiosensitisers at low concentrations is a novel discovery that holds great promise in developing low-cost cancer nanotherapeutics

Individuals With Scleroderma May Have Increased Risk of Sleep-Disordered Breathing.

STUDY OBJECTIVES:Scleroderma is associated with abnormal skin thickening, interstitial lung disease, pulmonary hypertension, and abnormalities of the upper airway. These changes can cause cardiopulmonary complications, potentially including sleep-disordered breathing. The objective of this study is to examine the risk of sleep-disordered breathing in patients with scleroderma. METHODS:We retrospectively identified patients with documented scleroderma. We abstracted data from their electronic health records, including findings from antibody tests, serial pulmonary function tests, transthoracic echocardiography, high-resolution computed tomography, and overnight forehead oximetry. RESULTS:We identified 171 patients with scleroderma. Mean age at the time of initial consult was 56.5 years (range, 18-96 years), and 150 (86.7%) were women. Scleroderma was categorized as limited disease for 108 (62.4%), diffuse disease for 59 (34.1%), and mixed connective tissue disease for 6 (3.5%). Fifty-four patients (31.2%) had abnormal overnight forehead oximetry results, defined as an oxygen desaturation index greater than 5 or a baseline mean arterial oxygen saturation level less than 90%. CONCLUSIONS:Cardiopulmonary complications are common in patients with scleroderma, one of which may be sleep-disordered breathing. In our cohort, approximately one-third of individuals with scleroderma had evidence of sleep-disordered breathing. Moreover, the rate of sleep-disordered breathing in our population of scleroderma patients was twice the rate of pulmonary hypertension and was approximately the same as the rate of interstitial lung disease. Future prospective studies are needed to further assess the role of sleep-disordered breathing in scleroderma clinical outcomes

Author Correction: Circulating Biomarkers to Identify Responders in Cardiac Cell therapy.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper

Motion-compensated noninvasive periodontal health monitoring using handheld and motor-based photoacoustic-ultrasound imaging systems

Simultaneous visualization of the teeth and periodontium is of significant clinical interest for image-based monitoring of periodontal health. We recently reported the application of a dual-modality photoacoustic-ultrasound (PA-US) imaging system for resolving periodontal anatomy and periodontal pocket depths in humans. This work utilized a linear array transducer attached to a stepper motor to generate 3D images via maximum intensity projection. This prior work also used a medical head immobilizer to reduce artifacts during volume rendering caused by motion from the subject (e.g., breathing, minor head movements). However, this solution does not completely eliminate motion artifacts while also complicating the imaging procedure and causing patient discomfort. To address this issue, we report the implementation of an image registration technique to correctly align B-mode PA-US images and generate artifact-free 2D cross-sections. Application of the deshaking technique to PA phantoms revealed 80% similarity to the ground truth when shaking was intentionally applied during stepper motor scans. Images from handheld sweeps could also be deshaken using an LED PA-US scanner. In ex vivo porcine mandibles, pigmentation of the enamel was well-estimated within 0.1 mm error. The pocket depth measured in a healthy human subject was also in good agreement with our prior study. This report demonstrates that a modality-independent registration technique can be applied to clinically relevant PA-US scans of the periodontium to reduce operator burden of skill and subject discomfort while showing pot

Planar lightwave integrated circuits with embedded actives for board and substrate level optical signal distribution

© 2004 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.DOI: 10.1109/TADVP.2004.831894As the data rate of integrated circuits dramatically increases, interconnection speed at the backplane and board levels are beginning to limit system performance, which drives investigations into alternative interconnection technologies. Critical factors to consider when evaluating alternative interconnection approaches include interconnect speed, power consumption, area, and compatibility with current backplane and board integration technologies. Optical interconnections can achieve very high speed with a significant reduction in interconnect footprint compared to transmission lines, robust signal quality in high-density interconnection systems because of immunity to electromagnetic interference, and potentially simple to design (compared to transmission lines) lines with materials which can be postprocessed onto printed wiring boards or integrated into the board structure. This paper explores design options for planar optical interconnections integrated onto boards, discusses fabrication options for both beam turning and embedded interconnections to optoelectronic devices, describes integration processes for creating embedded planar optical interconnections, and discusses measurement results for a number of integration schemes that have been demonstrated by the authors. In the area of optical interconnections with beams coupled to and from the board, the topics covered include integrated metal-coated polymer mirrors and volume holographic gratings for optical beam turning perpendicular to the board. Optical interconnections that utilize active thin film (approximately 1-5 µm thick) optoelectronic components embedded in the board are also discussed, using both Si and high temperature FR-4 substrates. Both direct and evanescent coupling of optical signals into and out of the waveguide are discussed using embedded optical lasers and photodetectors