Measurement of residual stresses induced by sequential weld buttering and cladding operations involving a 2.25Cr-1Mo substrate material

Dissimilar metal welds are necessary in high-pressure subsea systems and in cases where forged components must be welded to pipelines. F22 (2.25Cr-1Mo) steel is often used in such forged steel components and, since this steel cannot enter service without undergoing post-weld heat treatment (PWHT), the components are usually prepared for field welds through the application of a buttering layer. Furthermore, a weld overlay is deposited for the purpose of mitigating corrosion. This combination of multiple welding tasks and dissimilar materials leads to the possibility of developing substantial residual stresses. This study aims to provide insights to the evolution of residual stresses at each stage of the welding operation. The assessment has been undertaken on laboratory-scale weld mock-ups using the contour method for residual stress measurement, and incremental centre hole drilling. It was found that both buttering and cladding introduce near-yield levels of tensile residual stresses, but that these stresses are successfully relieved upon PWHT

Exercise protects against obesity induced semen abnormalities via downregulating stem cell factor, upregulating Ghrelin and normalizing oxidative stress

Increased oxidative stress and hormonal imbalance have been hypothesized to underlie infertility in obese animals. However, recent evidence suggests that Ghrelin and Stem Cell Factor (SCF) play an important role in fertility, in lean individuals. Therefore, this study aimed at investigating whether changes in the levels of Ghrelin and SCF in rat testes underlie semen abnormal parameters observed in obese rats, and secondly, whether endurance exercise or Orlistat can protect against changes in Ghrelin, SCF, and/or semen parameters in diet induced obese rats. Obesity was modelled in male Wistar rats using High Fat Diet (HFD) 12-week protocol. Eight week-old rats (n=40) were divided into four groups, namely, Group I: fed with a standard diet (12 % of calories as fat); Group II: fed HFD (40 % of calories as fat); Group III: fed the HFD with a concomitant dose of Orlistat (200 mg/kg); and Group IV: fed the HFD and underwent 30 min daily swimming exercise. The model was validated by measuring the levels of testosterone, FSH, LH, estradiol, leptin, triglycerides, total, HDL, and LDL cholesterol, and final change in body weight. Levels were consistent with published obesity models (see Results). As predicted, the HFD group had a 76.8 % decrease in sperm count, 44.72 % decrease in sperm motility, as well as 47.09 % increase in abnormal sperm morphology. Unlike the control group, in the HFD group (i.e. obese rats) Ghrelin mRNA and protein were elevated, while SCF mRNA and protein were diminished in the testes. Furthermore, in the HFD group, SOD and GPx activities were significantly reduced, 48.5±5.8 % (P=0.0012) and 45.6±4.6 % (P=0.0019), respectively, while TBARS levels were significantly increased (112.7±8.9 %, P≤0.0001). Finally, endurance exercise training and Orlistat administration individually and differentially protected semen parameters in obese rats. The mechanism includes, but is not limited to, normalizing the levels of Ghrelin, SCF, SOD, GPx and TBARS. In rat testes, diet induced obesity down regulates SCF expression, upregulates Ghrelin expression, and deteriorate oxidative stress levels, which are collectively detrimental to semen parameters. Exercise, and to a lesse r extent Orlistat administration, protected effectively against this detrimental effect

Prognostic impact of Additional Chromosomal Abnormalities in Egyptian Chronic Myeloid Leukemia Patients

BACKGROUND: Emergence of additional chromosomal abnormalities (ACAs) in chronic myeloid leukemia (CML) is associated with disease progression to advanced phases and reflects the genetic instability of CML. AIM: Is to evaluate the frequency of ACAs in chronic phase (CP) and advanced disease (AP) CML patients and study their impact on patient’s outcome, overall survival (OS) and event-free survival (EFS). RESULTS: The studied group (n = 73) included 31 males (43%) and 42 females (57%). Median age of patients at diagnosis was 37 years (17–76). Median TLC was 208×109/L (2.1–784.2), median Hb was 9.4 g/dL (5.7–13), and median platelets count was 290.5×109/L (13–1271). We identified 32 patients (44%) with ACAs. ACAs emergence was significantly associated with advanced phases of CML (13/21, 62%) compared to CP (19/52, 36%) (p = 0.048). ACAs were associated with lower median OS and EFS in CP compared to AP (38 vs. 120 ms) and (58.3 vs. 77 ms) (p = 0.026 and p = 0.065, respectively). Early molecular responders (6/17, 35%) at 3 months, and 6 months (10/26, 38%) developed ACAs less than nonoptimal responders. Disease phase, hepatomegaly and bone marrow eosinophilia were significant predictors of OS (p < 0.001, p = 0.02, p = 0.04, respectively). CONCLUSION: Early identification of ACAs in Ph+ metaphases at diagnosis and during therapy predicts CML outcome. ACAs emergence occurred at a higher frequency and at a younger age in our CML patients and are related to inferior EFS and OS

Evolution of microstructure and toughness in 2.25Cr-1Mo steel welds

In oil and gas and other industries, valve bodies are often manufactured using a 2.25Cr-1Mo steel which, if welded, requires post-weld heat treatment (PWHT) in order to restore toughness. The safe operation and long-term integrity of such welds is critically dependent on achieving adequate toughness across the welded joint. In this work, mock-ups were manufactured for the purpose of assessing the effects of the weld heat input on toughness. The assessment was made by carrying out crack tip opening displacement (CTOD) and Charpy-impact tests in different metallurgical regions and, after testing, by examining the fracture surfaces using optical- and scanning-electron microscopy, and energy-dispersive spectroscopy. There did not appear to be an effect of weld heat input on toughness at a test temperature of +20 °C. However, for the case where a high weld heat input was employed, the toughness of the weld metal dropped by close to 50% when the temperature was decreased to −20 °C. These results suggest that inadequate control of the welding process may lead to significant variability in weld toughness, and that high weld heat inputs should be avoided when welding or buttering 2.25Cr-1Mo steel components

Long-term risk prediction after major lower limb amputation: 1-year results of the PERCEIVE study

Background: Decision-making when considering major lower limb amputation is complex and requires individualized outcome estimation. It is unknown how accurate healthcare professionals or relevant outcome prediction tools are at predicting outcomes at 1-year after major lower limb amputation. Methods: An international, multicentre prospective observational study evaluating healthcare professional accuracy in predicting outcomes 1 year after major lower limb amputation and evaluation of relevant outcome prediction tools identified in a systematic search of the literature was undertaken. Observed outcomes at 1 year were compared with: healthcare professionals' preoperative predictions of death (surgeons and anaesthetists), major lower limb amputation revision (surgeons) and ambulation (surgeons, specialist physiotherapists and vascular nurse practitioners); and probabilities calculated from relevant outcome prediction tools. Results: A total of 537 patients and 2244 healthcare professional predictions of outcomes were included. Surgeons and anaesthetists had acceptable discrimination (C-statistic = 0.715), calibration and overall performance (Brier score = 0.200) when predicting 1-year death, but performed worse when predicting major lower limb amputation revision and ambulation (C-statistics = 0.627 and 0.662 respectively). Healthcare professionals overestimated the death and major lower limb amputation revision risks. Consultants outperformed trainees, especially when predicting ambulation. Allied healthcare professionals marginally outperformed surgeons in predicting ambulation. Two outcome prediction tools (C-statistics = 0.755 and 0.717, Brier scores = 0.158 and 0.178) outperformed healthcare professionals' discrimination, calibration and overall performance in predicting death. Two outcome prediction tools for ambulation (C-statistics = 0.688 and 0.667) marginally outperformed healthcare professionals. Conclusion: There is uncertainty in predicting 1-year outcomes following major lower limb amputation. Different professional groups performed comparably in this study. Two outcome prediction tools for death and two for ambulation outperformed healthcare professionals and may support shared decision-making