Curvature Effects in Gamma Ray Burst Colliding Shells

An elementary kinematic model for emission produced by relativistic spherical colliding shells is studied. The case of a uniform blast-wave shell with jet opening angle $\theta_j \gg 1/\Gamma$ is considered, where $\Gamma$ is the Lorentz factor of the emitting shell. The shell, with comoving width $\Delta r^\prime$, is assumed to be illuminated for a comoving time $\Delta t^\prime$ and to radiate a broken power-law $\nu L_\nu$ spectrum peaking at comoving photon energy \e_{pk,0}^{\prime}. Synthetic GRB pulses are calculated, and the relation between energy flux and internal comoving energy density is quantified. Curvature effects dictate that the measured $\nu F_\nu$ flux at the measured peak photon energy \e_{pk} is proportional to \e^3_{pk} in the declining phase of a GRB pulse. Possible reasons for discrepancy with observations are discussed, including adiabatic and radiative cooling processes that extend the decay timescale, a nonuniform jet, or the formation of pulses by external shock processes. A prediction of a correlation between prompt emission properties and times of the optical afterglow beaming breaks is made for a cooling model, which can be tested with Swift.Comment: 13 pages, 5 figures, added back-of-envelope estimate of curvature relation, minor corrections, ApJ, in press, v. 614, 10 Oct 200

Bait preference field study for the California ground squirrel

A bait preference field study of the California ground squirrel (Spermophilus beecheyi beecheyi) was performed involving the comparison of the following untreated bait formulations fed ad lib: oat groats, Ramik Green, and ZP Rodent Ag Bait. The study was performed on rangeland at California Polytechnic State University, San Luis Obispo, California, from March 11, 1984, to September 15, 1984. Poor bait quality problems occurred in the early period of the study (March 11 to May 17), resulting in poor acceptance of both Ramik and Ag Bait. A descriptive analysis of this period is discussed. The statistical analysis of relative bait consumption (June 3 to September 15) determined a significant difference between the consumption of oat groats versus Ramik and Ag Bait; no significant difference between Ramik and Ag Bait; the acceptance of all three baits was good; and the use of any of the three would result in control of the ground squirrels. There was a strong correlation between overall bait consumption and the ground squirrels observed

Ownership and financing of infrastructure : historical perspective

The authors summarize the rich and varied experiences of private and public provision of urban services in France, Great Britain, and the United States over the past 100 years. Their main focus is on experiences in the United States and on shifts back and forth between the public and private sectors. A few of their observations: (i) The values of politically important actors as well as the working of government, political, and legal institutions have shaped decisions about infrastructure development, the sorts of public goods demanded, and the roles played by private firms. (ii) The range of choices that has historically been made with respect to the ownership, financing, and operation of different infrastructures has been far too varied to be encompassed by simple distinctions between"public"and"private."(iii) Throughout the world, many infrastructures owned and operated by governments have been built by private firms. (iv) In the United States, private firms and property-owners associations of various sorts have owned outright both toll roads and residential streets. Private firms have also collected solid wastes and provided urban transport under a range of franchise, contracting, and regulatory arrangements. The situation with mass transit has been similar in Great Britain. Although water works facilities in France are predominantly government-owned, private firms operate and manage most systems under an array of contracting and leasing arrangements. (v) Even when facilities have been owned by private firms, direct competition has been of limited importance in the provision of many kinds of infrastructure. But market discipline can arise from other sources. (vi) Privatization can get government bureaucracies out of the business of performing entrepreneurial activities for which they may be poorly suited. When market forces are weak, however, and important public interests are at stake, strengthening government institutions may be a prerequisite for successful privatization. (vii) In the electric utility industry, private firms played a far greater role in U.S. electric utilities than in Great Britain, in part because of different views about appropriate roles for government in providing essential services. For similar reasons, the state played a much larger role in furnishing telecommunications services in France than in the United States. (viii) Beliefs about the"publicness"of different goods and services have helped shape the character of regulatory franchise, and contracting arrangements. When a good is seen as mainly private, it is easier for private service providers to be compensated mainly by user fees and for most decisions about price, output, and quality, no matter what the role played by private firms in actually providing services. (ix) Goods defined as"public"have often been provided free to users, even though it would have been easy to exclude nonpayers. Examples in the United States include interstate highway systems, public parks, public libraries, and police and fire protection. Free services have been provided because it is believed that in these domains market relationships should not apply - and that denying nonpayers the public services would be a denial of rights. (x) In Great Britain and the United States, the contracting out of public services has been both supported and opposed because of its potential to break the power of public sector unions and to cut workers'pay. In the United States, privatization has also come under attack on the grounds that opportunities for minority employment may be reduced.Regional Governance,Public Sector Economics&Finance,Decentralization,Public Sector Management and Reform,Urban Governance and Management,Public Sector Management and Reform,Urban Governance and Management,Regional Governance,Town Water Supply and Sanitation,Public Sector Economics&Finance

Study on the thermal stability of Polystyryl surfactants and its modified clay nanocomposites

Five oligomeric styrene surfactants, N,N,N-trimethylpolystyrylammonium, N,N-dimethyl-N-benzylpolystyrylammonium, N,N-dimethyl-N-hexadecylpolystyrylammonium, 1,2-dimethyl-3-polystyrylimidazolium, and triphenylpolystyrylphosphonium chlorides were synthesized and used to prepare organically modified clays. Both styrene and methyl methacrylate nanocomposites were prepared by melt blending and the type of nanocomposite was evaluated by X-ray diffraction and transmission electron microscopy. The thermal stability of the organically modified clays and the nanocomposites were studied by thermogravimetric analysis; these systems do give clays which have good thermal stability and may be useful for melt blending with polymers that must be processed at higher temperatures

Experimental Economics

This is the first comprehensive treatment of laboratory experiments designed to evaluate economic propositions under carefully controlled conditions. While it acknowledges that laboratory experiments are no panacea, it argues cogently for their effectiveness in selected situations. Covering methodological and procedural issues as well as theory, Experimental Economics is not only a textbook but also a useful introduction to laboratory methods for professional economists. The emphasis is on organizing and evaluating existing results. The book can be used as an anchoring device for a course at either the graduate or advanced undergraduate level. Applications include financial market experiments, oligopoly price competition, auctions, bargaining, provision of public goods, experimental games, and decision making under uncertainty. The book also contains instructions for a variety of laboratory experiments.laboratory experiments, financial markets, price competition, auctions, bargaining, games, decision making, uncertainty

Methyl Methacrylate Oligomerically-Modified Clay and its Poly (Methyl Methacrylate) Nanocomposites

A methyl methacrylate oligomerically-modified clay was used to prepare poly(methyl methacrylate) clay nanocomposites by melt blending and the effect of the clay loading level on the modified clay and corresponding nanocomposite was studied. These nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis and cone calorimetry. The results show a mixed intercalated/delaminated morphology with good nanodispersion. The compatibility between the methylacrylate-subsituted clay and poly(methyl methacrylate) (PMMA) are greatly improved compared to other oligomerically-modified clays

Novel Polymerically-Modified Clays Permit the Preparation of Intercalated and Exfoliated Nanocomposites of Styrene and its Copolymers by Melt Blending

Two new organically-modified clays have been made and used to produce nanocomposites of polystyrene, high impact polystyrene and acrylonitrile–butadiene–styrene terploymer. At a minimum, intercalated nanocomposites of all of these polymers have been produced by melt blending in a Brabender mixer and, in some cases, exfoliated nanocomposites have been obtained. The systems have all been characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, cone calorimetry and the measurement of mechanical properties. These novel new clays open new opportunities for melt blending of polymers with clays to obtain nanocomposites with important properties

Fire properties of styrenic polymer–clay nanocomposites based on an oligomerically-modified clay

An oligomerically-modified clay has been used to fabricate nanocomposites with styrenic polymers, such as polystyrene, high-impacted polystyrene, poly(styrene-co-acrylonitrile) and acrylonitrile–butadiene–styrene by melt blending. The clay dispersion was evaluated by X-ray diffraction and bright field transmission electron microscopy. All of the nanocomposites have a mixed delaminated/intercalated structure. The fire properties of nanocomposites were evaluated by cone calorimetry and the mechanical properties were also evaluated

Monitoring the Very-Long-Term Variability of X-ray Sources in the Giant Elliptical Galaxy M87

We report on our search for very-long-term variability (weeks to years) in X-ray binaries (XRBs) in the giant elliptical galaxy M87. We have used archival Chandra imaging observations to characterise the long-term variability of 8 of the brightest members of the XRB population in M87. The peak brightness of some of the sources exceeded the ultra luminous X-ray source (ULX) threshold luminosity of ~ 10^{39} erg/s, and one source could exhibit dips or eclipses. We show that for one source, if it has similar modulation amplitude as in SS433, then period recoverability analysis on the current data would detect periodic modulations, but only for a narrow range of periods less than 120 days. We conclude that a dedicated monitoring campaign, with appropriately defined sampling, is essential if we are to investigate properly the nature of the long-term modulations such as those seen in Galactic sources.Comment: 19 pages, 19 figures, 1 table, Accepted for publication in MNRAS. Updated to correct typos in previous versio

Styrenic Polymer Nanocomposites Based on an Oligomerically-Modified Clay with High Inorganic Content

Clay was modified with an oligomeric surfactant containing styrene and lauryl acrylate units along with a small amount of vinylbenzyl chloride to permit the formation of an ammonium salt so that this can be attached to a clay. The oligomerically-modified clay contains 50% inorganic clay, and styrenic polymer nanocomposites, including those of polystyrene (PS), high-impact polystyrene (HIPS), styrene–acrylonitrile copolymer (SAN) and acrylonitrile–butadiene–styrene (ABS), were prepared by melt blending. The morphologies of the nanocomposites were evaluated by X-ray diffraction and transmission electron microscopy. Mixed intercalated/delaminated nanocomposites were formed for SAN and ABS while largely immiscible nanocomposites were formed for PS and HIPS. The thermal stability and fire properties were evaluated using thermogravimetric analysis and cone calorimetry, respectively. The plasticization from the oligomeric surfactant was suppressed and the tensile strength and Young\u27s modulus were improved, compared to similar oligomerically-modified clays with higher organic content