48,602 research outputs found
Nitric acid-organic mixtures surveyed for use in separation by anion exchange methods
Column elution-spectrographic analysis technique compares certain solvents directly to the methanol system, using inert rare earths instead of actinides. Distribution ratios for americium between 90 percent solvent, 10 percent 5 M nitric acid and Dowex 1 nitrate form resin for a large group of organics miscible in water was determined
Portable, high intensity isotopic neutron source provides increased experimental accuracy
Small portable, high intensity isotopic neutron source combines twelve curium-americium beryllium sources. This high intensity of neutrons, with a flux which slowly decreases at a known rate, provides for increased experimental accuracy
X-ray observations of the Ultraluminous infrared galaxy IRAS19254-7245 (The Superantennae)
We present ROSAT HRI and ASCA observations of the well known ULIRG
IRAS19254-7245 (the Superantennae). The object is not detected by ROSAT
yielding a 3\sigma upper limit of L_x ~8x10^{41} erg/s in the 0.1-2 keV band.
However, we obtain a clear detection by ASCA yielding a luminosity in the 2-10
keV band of 2 \times 10^{42}erg/s. Its X-ray spectrum is very hard, equivalent
to a photon index of Gamma=1.0+-0.35.
We therefore, attempt to model the X-ray data with a "scatterer" model in
which the intrinsic X-ray emission along our line of sight is obscured by an
absorbing screen while some fraction, f, is scattered into our line of sight by
an ionized medium; this is the standard model for the X-ray emission in
obscured (but non Compton-thick)
Seyfert galaxies. We obtain an absorbing column of 2x10^{23}cm^{-2} for a
power-law photon index of Gamma=1.9, an order of magnitude above the column
estimated on the basis of optical observations; the percentage of the scattered
emission is high (~20%). Alternatively, a model where most of the X-ray
emission comes from reflection on a Compton thick torus (N_H>10^{24} cm^{-2})
cannot be ruled out.
We do not detect an Fe line at 6.4 keV; however, the upper limit (90%) to the
equivalent width of the 6.4 keV line is high (~3 keV).
All the above suggest that most of the X-ray emission originates in an highly
obscured Seyfert-2 nucleus.Comment: 5 pages, 1 figure, 1 table, To appear in MNRA
Effects of Crust Ingestion on Mixer Pump Performance in Tank
In August 1999, a workshop was held at Pacific Northwest National Laboratory to discuss the effects of crust ingestion on mixer pump performance in Hanford Waste Tank 241-SY-101. The main purpose of the workshop was to evaluate the potential for crust ingestion to degrade mixing and/or damage the mixer pump. The need for a previously determined 12-inch separation between the top of the mixer pump inlet and the crust base was evaluated. Participants included a representative from the pump manufacturer, an internationally known expert in centrifugal pump theory, Hanford scientists and engineers, and operational specialists representing relevant fields of expertise.
The workshop focused on developing an understanding of the pump design, addressing the physics of entrainment of solids and gases into the pump, and assessing the effects of solids and gases on pump performance. The major conclusions are summarized as follows:
* Entrainment of a moderate amount of solids or gas from the crust should not damage the pump or reduce its lifetime, though mixing effectiveness will be somewhat reduced.
* Air binding should not damage the pump. Vibration due to ingestion of gas, solids, and objects potentially could cause radial loads that might reduce the lifetime of bearings and seals. However, significant damage would require extreme conditions not associated with the small bubbles, fine solids, and chunks of relatively weak material typical of the crust.
* The inlet duct extension opening, 235 inches from the tank bottom, should be considered the pump inlet, not the small gap at 262 inches.
* A suction vortex exists at the inlet of all pumps. The characteristics of the inlet suction vortex in the mixer pump are very hard to predict, but its effects likely extend upward several feet. Because of this, the current 12-inch limit should be replaced with criteria based on actual monitored pump performance. The most obvious criterion (in addition to current operational constraints) is to monitor discharge pressure and cease pump operation if it falls below a predetermined amount.
* There are no critically necessary tests to prove pump operability or performance before initiating the transfer and back-dilution sequence
ROSAT observations of two 'cooling flow' EMSS Galaxies
We present ROSAT observations of two luminous L~10^44 erg/s EMSS galaxies,
MS1019+5139 and MS1209+3917, previously classified as 'cooling flow' galaxies.
MS1019+5139 does not appear to be spatially extended (<13 kpc) while its
spectrum is well fit by a power law with Gamma = 1.73 +0.19-0.18; X-ray
variability on a timescale of ~ years is also clearly detected. MS1209+3917
shows no evidence of spatial extension (<50 kpc) but it shows variability,
while its spectrum can be fit with thermal bremsstrahlung emission (kT=1.8
+0.9-0.4 keV) or a power law model (Gamma = 2.50 +0.44-0.42, but with excess
photoelectric absorption above the Galactic value). All the above argue against
thermal emission from a group of galaxies or a galaxy but in favour of an AGN
(possibly BL Lac) interpretation. We conclude that no 'normal' galaxies with
high X-ray luminosities have yet been detected in the EMSS survey that could be
significant contributors to the X-ray background.Comment: 6 pages, LaTeX, 6 postscript figures included, to appear in MNRA
Equivalence of two mathematical forms for the bound angular momentum of the electromagnetic field
It is shown that the mathematical form, obtained in a recent paper, for the
angular momentum of the electromagnetic field in the vicinity of electric
charge is equivalent to another form obtained previously by Cohen-Tannoudji,
Dupont-Roc and Gilbert. In this version of the paper an improved derivation is
given.Comment: 4 pages pdf, simpler derivatio
Project management techniques for highly integrated programs
The management and control of a representative, highly integrated high-technology project, in the X-29A aircraft flight test project is addressed. The X-29A research aircraft required the development and integration of eight distinct technologies in one aircraft. The project management system developed for the X-29A flight test program focuses on the dynamic interactions and the the intercommunication among components of the system. The insights gained from the new conceptual framework permitted subordination of departments to more functional units of decisionmaking, information processing, and communication networks. These processes were used to develop a project management system for the X-29A around the information flows that minimized the effects inherent in sampled-data systems and exploited the closed-loop multivariable nature of highly integrated projects
Automatic holographic droplet analysis for liquid fuel sprays
The basic scheme for automated holographic analysis involves an optical system for reconstruction of the three dimensional real image of the droplet field, a spatial scanning system to transport a digitizing X-y image sensor through the real image, and processing algorithms for droplet recognition which establish the droplet sizes and positions. The hardware for system demonstrated includes the expanded and collimated beam from a 5 mW helium-neon laser for hologram reconstruction, an imaging lens for magnification of the real image field, and a video camera and digitizer providing 512-by-512 pixel resolution with 8-bit digitization. A mechanical stage is used to scan the hologram in three dimensional space, maintaining constant image magnification. A test droplet hologram is used for development and testing of the image processing algorithms
Adobe Flash as a medium for online experimentation: a test of reaction time measurement capabilities
Adobe Flash can be used to run complex psychological experiments over the Web. We examined the reliability of using Flash to measure reaction times (RTs) using a simple binary-choice task implemented both in Flash and in a Linux-based system known to record RTs with millisecond accuracy. Twenty-four participants were tested in the laboratory using both implementations; they also completed the Flash version on computers of their own choice outside the lab. RTs from the trials run on Flash outside the lab were approximately 20 msec slower than those from trials run on Flash in the lab, which in turn were approximately 10 msec slower than RTs from the trials run on the Linux-based system (baseline condition). RT SDs were similar in all conditions, suggesting that although Flash may overestimate RTs slightly, it does not appear to add significant noise to the data recorded
- …