498 research outputs found
Nonlinear stability analysis of piecewise actuated piezoelectric microstructures
The main objective of this research is to provide a general nonlinear model of adjustable piezoelectric microwires with the ability to tune the stability conditions. In order to increase the controllability and improve system characteristics, only a part of the substrate is electrostatically actuated and the piezoelectric voltage is also applied. The governing equation of equilibrium (EOE) is derived from the principle of minimum total potential energy. The influences of the surface layer, size dependency, piezoelectricity, and dispersion forces are also included simultaneously. To solve the nonlinear differential equation, a numerical method is implemented and the obtained results are validated with available experimental and numerical results. Afterward, a set of parametric studies is carried out to examine the coupled effects of piezo-voltage, length/position of non-actuated pieces, nonlinear curvature, and molecular forces on the microresonators. It is found that the beam deflection and the pull-in voltage have sensitive-dependence on the system behavior. Furthermore, the beam deflection can increase or decrease with consideration of different positions of non-actuated pieces. This research is expected to fill a gap in the state of the art of the piezoelectric microstructures and present relevant results that are instrumental in the investigation of advanced actuated microdevices
3D printing on-water sports boards with bio-inspired core designs
Modeling and analyzing the sports equipment for injury prevention, reduction in cost, and performance enhancement have gained considerable attention in the sports engineering community. In this regard, the structure study of on-water sports board (surfboard, kiteboard, and skimboard) is vital due to its close relation with environmental and human health as well as performance and safety of the board. The aim of this paper is to advance the on-water sports board through various bio-inspired core structure designs such as honeycomb, spiderweb, pinecone, and carbon atom configuration fabricated by three-dimensional (3D) printing technology. Fused deposition modeling was employed to fabricate complex structures from polylactic acid (PLA) materials. A 3D-printed sample board with a uniform honeycomb structure was designed, 3D printed, and tested under three-point bending conditions. A geometrically linear analytical method was developed for the honeycomb core structure using the energy method and considering the equivalent section for honeycombs. A geometrically non-linear finite element method based on the ABAQUS software was also employed to simulate the boards with various core designs. Experiments were conducted to verify the analytical and numerical results. After validation, various patterns were simulated, and it was found that bio-inspired functionally graded honeycomb structure had the best bending performance. Due to the absence of similar designs and results in the literature, this paper is expected to advance the state of the art of on-water sports boards and provide designers with structures that could enhance the performance of sports equipment
The Importance of Poverty in Sustainability Policies: An Approach to Understanding Online Opinion
Twitter data related to poverty and basic income was collected for 24 days in
2019, and then was cleaned and prepared for natural language processing. A 7 % subset of the
data was manually labeled for sentiment analysis in order to inform the artificial intelligence
(AI), which was trained and verified on this subset. We present the results for both the 7 %
verification sample and the entire database. This analysis of public opinion on poverty is
situated within the Sustainable Development Goals and the support for poverty reduction
policies.Los datos de Twitter relacionados con la pobreza y los ingresos básicos se reco pilaron durante 24 dÃas en el 2019, se limpiaron y se prepararon para el procesamiento del lenguaje natural (natural language processing). Un subconjunto del 7 % de los datos se etiquetó
manualmente para el análisis de sentimientos con el fin de informar a la inteligencia artificial
(IA). La IA fue entrenada y verificada en este subconjunto. Presentamos los resultados tanto
de la muestra del 7 % como de toda la base de datos. Este análisis de la opinión pública sobre
la pobreza se sitúa dentro de los objetivos de desarrollo sostenible y el apoyo a las polÃticas de
reducción de la pobreza
Recommended from our members
Multi-trigger thermo-electro-mechanical soft actuators under large deformations
Dielectric actuators (DEAs), because of their exceptional properties, are well-suited for soft actuators (or robotics) applications. This article studies a multi-stimuli thermo-dielectric-based soft actuator under large bending conditions. In order to determine the stress components and induced moment (or stretches), a nominal Helmholtz free energy density function with two types of hyperelastic models are employed. Non-linear electro-elasticity theory is adopted to derive the governing equations of the actuator. Total deformation gradient tensor is multiplicatively decomposed into electro-mechanical and thermal parts. The problem is solved using the second-order Runge-Kutta method. Then, the numerical results under thermo-mechanical loadings are validated against the finite element method (FEM) outcomes by developing a user-defined subroutine, UHYPER in a commercial FEM software. The effect of electric field and thermal stimulus are investigated on the mean radius of curvature and stresses distribution of the actuator. Results reveal that in the presence of electric field, the required moment to actuate the actuator is smaller. Finally, due to simplicity and accuracy of the present boundary problem, the proposed thermally-electrically actuator is expected to be used in future studies and 4D printing of artificial thermo-dielectric-based beam muscles
Effects of topology optimization in multimaterial 3D bioprinting of soft actuators
Recently, there has been a proliferation of soft robots and actuators that exhibit improved capabilities and adaptability through three-dimensional (3D) bioprinting. Flexibility and shape recovery attributes of stimuli-responsive polymers as the main components in the production of these dynamic structures enable soft manipulations in fragile environments, with potential applications in biomedical and food sectors. Topology optimization (TO), when used in conjunction with 3D bioprinting with optimal design features, offers new capabilities for efficient performance in compliant mechanisms. In this paper, multimaterial TO analysis is used to improve and control the bending performance of a bioprinted soft actuator with electrolytic stimulation. The multimaterial actuator performance is evaluated by the amplitude and rate of bending motion and compared with the single material printed actuator. The results demonstrated the efficacy of multimaterial 3D bioprinting optimization for the rate of actuation and bending
Patient-specific 3D-printed splint for mallet finger injury
Despite the frequency of mallet finger injuries, treatment options can often be costly, time-consuming, and ill-fitted. Three-dimensional (3D) printing allows for the production of highly customized and inexpensive splints, which suggests potential efficacy in the prescription of casts for musculoskeletal injuries. This study explores how the use of engineering concepts such as 3D printing and topology optimization (TO) can improve outcomes for patients. 3D printing enables the direct fabrication of the patient-specific complex shapes while utilizing finite element analysis and TO in the design of the splint allowed for the most efficient distribution of material to achieve mechanical requirements while reducing the amount of material used. The reduction in used material leads to significant improvements in weight reduction and heat dissipation, which would improve breathability and less sweating for the patient, greatly increasing comfort for the duration of their recovery
Influence of hybridization on tensile behaviors of non-absorbable braided polymeric sutures
This paper aims to investigate the effects of fiber hybridization technique on the mechanical behaviors of non-absorbable braided composite sutures. Fifteen types of hybrid braided sutures (HBSs) made of polyester (PET), polypropylene (PP), and polyamide 6 (PA6) are produced and tested to measure ultimate tensile strength (UTS), maximum strain, elastic modulus, and breaking toughness. Based on the results, it is observed that the suture material plays a significant role in the tensile and mechanical performance of HBSs, and they can be tailored through the different combinations of yarns according to the required mechanical properties. Experiments exhibit occurrence positive hybrid effect in both maximum strain and elastic modulus, and negative hybrid effect in UTS. The optimal tensile performance is associated with the hybrid structure comprising 75% PA6-12.5% PET-12.5% PP. This means the ternary structure with higher PA6 content along with PP and PET, demonstrates a synergistic effect. Thus, such a ternary composite structure is very promising for the design of novel non-absorbable sutures. Due to the absence of similar results in the specialized literature, this paper is likely to advance the state-of-the-art composite non-absorbable sutures and contribute to a better understanding of the hybridization concept for optimizing composite material systems
Shape-adaptive metastructures with variable bandgap regions by 4D printing
This article shows how four-dimensional (4D) printing technology can engineer adaptive metastructures that exploit resonating self-bending elements to filter vibrational and acoustic noises and change filtering ranges. Fused deposition modeling (FDM) is implemented to fabricate temperature-responsive shape-memory polymer (SMP) elements with self-bending features. Experiments are conducted to reveal how the speed of the 4D printer head can affect functionally graded prestrain regime, shape recovery and self-bending characteristics of the active elements. A 3D constitutive model, along with an in-house finite element (FE) method, is developed to replicate the shape recovery and self-bending of SMP beams 4D-printed at different speeds. Furthermore, a simple approach of prestrain modeling is introduced into the commercial FE software package to simulate material tailoring and self-bending mechanism. The accuracy of the straightforward FE approach is validated against experimental observations and computational results from the in-house FE MATLAB-based code. Two periodic architected temperature-sensitive metastructures with adaptive dynamical characteristics are proposed to use bandgap engineering to forbid specific frequencies from propagating through the material. The developed computational tool is finally implemented to numerically examine how bandgap size and frequency range can be controlled and broadened. It is found out that the size and frequency range of the bandgaps are linked to changes in the geometry of self-bending elements printed at different speeds. This research is likely to advance the state-of-the-art 4D printing and unlock potentials in the design of functional metastructures for a broad range of applications in acoustic and structural engineering, including sound wave filters and waveguides
Control-based 4D printing: adaptive 4D-printed systems
Building on the recent progress of four-dimensional (4D) printing to produce dynamic structures, this study aimed to bring this technology to the next level by introducing control-based 4D printing to develop adaptive 4D-printed systems with highly versatile multi-disciplinary applications, including medicine, in the form of assisted soft robots, smart textiles as wearable electronics and other industries such as agriculture and microfluidics. This study introduced and analysed adaptive 4D-printed systems with an advanced manufacturing approach for developing stimuli-responsive constructs that organically adapted to environmental dynamic situations and uncertainties as nature does. The adaptive 4D-printed systems incorporated synergic integration of three-dimensional (3D)-printed sensors into 4D-printing and control units, which could be assembled and programmed to transform their shapes based on the assigned tasks and environmental stimuli. This paper demonstrates the adaptivity of these systems via a combination of proprioceptive sensory feedback, modeling and controllers, as well as the challenges and future opportunities they present
- …