50 research outputs found
Investigate of the influence for multiple resistance welding currents in austerities nickel-chromium alloys on welded joints mechanical characteristics
We have studied the shear strength, with regards to 302 “austenitic stainless steel spot welds”. It is undeniable that the current for a welding within resistance spot welding development (RSW) shows a very important character. Nevertheless, these effects of this item are popular so it has been considered widely all through literature works. Our aim in this work is to show the effect of heat treatment on different joints welded at multiple currents. The experimental results demonstrate about a tensile shear strength that could be increased together along with the increasing in refer to current. Annealing treatment increases escorted by tensile shear strength as a size of grain reforms, in addition the remaining stresses removed. Refinement of grain serves to be an operative practice for a strength improvement. With that, the tensile; shear strength could be increased through having the annealed temperature of treatment reached; 750 C°. Regardless, at 850 C°, the tensile shear strength decreases
Composite patch reinforcement of a cracked simply-supported beam traversed by moving mass
In this study dynamic analysis of a metallic beam under travelling mass was investigated. A beam with an edge crack was considered to be reinforced using composite patch. Euler-Bernoulli beam theory was applied to simulate the time-history behavior of the beam under dynamic loading. Crack in the beam was modeled using a rotational spring. Dimension of the composite patch, crack length, stress intensity factor at crack tip and beam deflection are some parameters which were studied in details. Results were validated against those which were found through Finite Element Method
Development of ternary blend cement-free binder material for construction
This study aims to develop new ternary blend (TB) cement-free binder materials as an alternative to conventional cement by using Paper Sludge Ash (PSA) waste as the base material. During this research, the combined application of mechanical activation (grinding) and chemical activation by blending with pozzolanic: (silica fume; SF) and (rice husk ash; RHA), and high al-kalinity: (poultry litter fly ash; PLFA) and (cement kiln dust; CKD) materials were investigated. The research plan included four stages in which PSA was activated and replaced with the above-mentioned materials until reaching a ternary blend binder with the best performance (depending on the mortar compressive strength). Thereafter, the performance of this ternary blend binder was compared with the conventional cement by conducting compressive strength (at the ages of 3, 7 and 28days) and Scanning electron microscopy (SEM) tests. The findings indicated that a cement-free binder material was developed by using a combination of 60% PSA that was blended with 20% RHA and 20% PLFA. The new binder has shown higher compressive strength than the conventional cement by about 12% after 28 days of curing
Effect of Emulsified Asphalt on Expansive Soil Strength and Swelling
Some clay soils classified as extended soils threaten the structures resting on them. Many additives are available to improve the properties of expanded soils. This study tries to investigate the consequences of wetting-drying cycles on the swelling behavior of modified expansive clayey soils under laboratory conditions by modifying expansive clayey soil samples using emulsified asphalt. Five different percentages of emulsified asphalt were used: (2, 4, 6, 8, and 10) %. The natural and treatment soils were tested for classification, specific gravity, compaction characteristics, free swell and swell pressure, consolidation, and compressive strength. The liquid limit and plasticity index have been lowered by adding Emulsified Asphalt. After that, the effects of Emulsified Asphalt on undrained shear strength characteristics (cohesion and friction angle) have been studied. The results revealed that when the emulsified asphalt content was increased to 10%, the swelling pressure and swelling potential decreased by 58 and 78 %, respectively. The swell and shrink improvement factor for the 10% emulsified asphalt addition is always larger than 75%. As the duration of wetting-drying cycles increased, the swelling pressure and swelling potential values were also reduced. The plastic limit, on the other hand, increased as the Emulsified Asphalt content increased. Increasing the amount of Emulsified Asphalt increased the maximum dry unit weight values, whereas the optimum water contents increased. It was concluded that emulsified asphalt stabilization may be useful for expansive clay as it improves compressive shear strength
Impact of high volume GGBS replacement and steel bar length on flexural behaviour of reinforced concrete beams
The Ordinary Portland Cement (OPC) is one of the major ingredient utilized for the manufacture of concrete. The manufacturing of cement includes the release of huge amounts of CO2 gas as a main contributor for greenhouse influence and global warming. Several researchers have investigated the characteristics of OPC concrete utilizing cementitious materials like fly ash, silica fume, and Ground Granulated Blast furnace Slag (GGBS) as replacement materials. The article aims to investigate experimentally the flexural behavior of concrete beams with GGBS. The experimental work was divided into three stages, the first one consists of six reinforced concrete beam specimens with (0%, 40% and 60%) of GGBS. During this stage, the used steel bars were 8 mm diameter and 500 mm in length. In the second stage, the length of the steel bars was reduced to 400 mm with the best mixture of (GGBS+OPC) that obtained from stage 1. In the third stage, the best length of steel bars was used with the best (GGBS+OPC) ratio to be tested at 7, 14 and 28 days from the date of casting. Consequences of this exploration suggests that replacement of OPC with 40 percent GGBS with 500 mm steel bar length can be used in reinforced concrete specimens as it shows comparable results relative to control mixtures (0% GGBS)
Production of Ternary Blend Binder as an Alternative to Portland Cement
Environmental pollution and the relatively high cost of waste disposal have been a major focus for scientists around the world, leading researchers to find a solution to reuse waste materials in different applications. Additionally, landfills are considered one of the biggest crisis facing the Iraqi government. Therefore, this study aims to present a new ternary mixture that consists of OPC in addition to Pulverized Fuel Ash (PFA), Ground Granulated Blast Furnace Slag (GGBS) by utilizing it as a partial substitution of cement. A new ternary mortar mixtures containing four substitution levels of cement with GGBS and PFA (0%, 30 %, 50% and 70% by weight) were carried out. The Ultrasonic Pulse Velocity (UPV) and compressive strength tests were adopted to show the influence of GGBS and PFA on mechanical features of cement mortar. Findings indicated that, the compressive strength values were reduced with increasing the GGBS and PFA proportions at all curing ages. For 70% replacement, the compressive strength values were the lowest values comparison with that for control specimens. In contrast, the GGBS and PFA had a negative and positive impacts on the UPV of mortar depending on the substitution ratio. At 30 % substitution levels, the velocity value was enhanced, while other substitution ratios affected negatively on the UPV values
Influence of High Volume RHA on Properties of Cement Mortar
This work study the impact of partial cement replacement by high volume Rice Husk Ash (RHA) on some characteristics of cement mortar like compressive strength and flexural strength at different ages. In this research, RHA was used in three different ratios (20, 40, and 60)% as a cement substitution and the findings were compared with control mixture (0% RHA). The findings demonstrated that the replacement of cement by RHA reduced the compressive strength of all selected ratios and the increase in the content of RHA lead to reduce compressive strength comparative to control sample with 100% cement as a binder at all ages. However, the flexural strength results indicated that the RHA in 20% showed approximately same results as control sample at early ages while increasing the curing period lead to improve flexural strength. Increasing RHA higher than 20% lead to decrease Flexural strength at all selected ages
The Impact of Using Different Ratios of Latex Rubber on the Characteristics of Mortars Made with GGBS and Portland Cement
Preserving natural resources and implementing the concepts of sustainable engineering to approach the zero waste concept helped in reducing the detrimental environmental effects in the last two-decade. Proposed re-using of Ground Granulated Blast Furnace Slag (GGBS) as an alternate solution is to get rid of them and profit from them concurrently. In this process, GGBS is used as cement substitute material to enhance mortar characteristics. On the other hand, the required water for concrete mixture should be characterized by several characters, which similar to drinkable water, therefore, using of Latex Rubber as a water substitution reduces the demand for such water in the construction industry. In this project, percentages of GGBS that have been used were 0%, 10%, 30%, and 50% which compatible with (0, 10, 20 and 30) % of Latex Rubber. Suitable tests were performed to measure properties of mortar by GGBS and Latex Rubber such as setting time, compressive strength and Permeability test (Electrical resistivity). The results obtained indicate that the setting time reduced with increasing Rubber Latex in spite of increasing the proportion of water to binder. Additionally, increasing the Latex Rubber amount leads to decrease the compressive strength and electrical resistivity of mortars
Early age assessment of cement mortar incorporated high volume fly ash
The technique of replacing the cement with other alternative materials focuses on the production of materials with similar performance and reduced environmental impacts relative to traditional cement. The main aim of this study is to investigate the effect of replacing the cement content with high volume of Pulverised Fuel Ash (PFA) on the mechanical performance of cement mortar. Three mixtures were prepared with different percentages of PFA (20%, 40% and 60%) as replacement of cement along with other mixture that made with 100% cement as a control mixture. In order to evaluate the performance of the cement mortars, compressive strength and Ultrasonic Pulse Velocity (UPV) tests after 7, 14 and 28 days of curing was used. The results indicated that for all ages of curing, the increase of PFA contents caused a reduction in the compressive strength and UPV in comparison with the control mixture. After 28 days of curing, the results indicated that the mixture incorporated 20% PFA has similar UPV value relative to the control mixture. Such findings will significantly contribute in reducing the cost of the produced mortar by reducing the amount of used cement and this consequently reduce the cement demands/manufacturing. Less production of cement will reduce the Carbon Dioxide (CO2) emissions of the cement industry
Effect of Clay Brick Waste Powder on the Fresh and Hardened Properties of Self-Compacting Concrete: State-of-the-Art and Life Cycle Assessment
Sustainability and reducing environmental damage caused by CO2 emissions have become issues of interest to researchers in the construction sector around the world. Reducing the cement content in concrete by partially substituting it with by-products or waste falls within this field as the cement industry is responsible for 7% of global CO2 emissions. On the other hand, self-compacting concrete (SCC) is one of the special types of concrete that contains a large amount of powder (most of which is cement) to ensure its flow under the influence of its weight without separating its components. Therefore, to produce eco-friendly SCC, many researchers have replaced part of the cement with clay brick waste powder (CBWP) since brick units are among the most widely used building materials after concrete. Accordingly, this study aims to review previous research that included using CBWP in SCC. The effect of these wastes on the fresh, mechanical, durability and microstructural properties of cement was reviewed. Additionally, a comparison between the environmental impacts of SCCs with different CBWP contents has been conducted using the life cycle assessment (LCA) approach. It was found that the highest value of CBWP that can be used without negatively affecting the different properties of concrete is 10% by weight of cement. Moreover, regarding environmental impact, using CBWP as a substitute for cement reduces environmental damage, and the lowest environmental impact that can be achieved per strength unit (MPa) is 37.5%