4 research outputs found
제3회 석탄화력발전과 미세먼지 연속 세미나(김동영, 유경선)
O 주제 : 석탄화력발전과 관련된 대기오염정책 현황과 시사점
O 목 적
- 최근 미세먼지에 대한 이슈가 대두되면서 그 주요원인 중 하나로 석탄화력발전소가 지목되고 있음
- 이미 선진국에서는 온실가스 및 대기오염물질 배출에 따른 피해 등으로 석탄화력발전소를 더 이상 증설하지 않거나 단계적으로 폐쇄하고 있음
- 그러나 우리나라는 경제성과 안정성의 이유로 석탄화력발전의 유지 및 증대를 고수하고 있으며, 이로 인해 국내 석탄화력발전 설비의 절반 가까이가 운영되고 있는 충청남도는 그 피해가 매우 높을 것으로 예상됨
- 이에 석탄화력발전과 미세먼지에 대한 국내외 이슈 등을 점검하고 석탄화력발전의 전망 및 대응 방안을 연속 세미나를 통해 모색하고자 함
O 개 요
- 일시 : 2016년 7월 19일(수) 10:00~11:50
- 장소 : 충남연구원 1층 회의실
- 참석자 : 충청남도, 학ㆍ연 전문가, NGO, 충남연구원 등
O 주제발표
- 제1주제 : 수도권 대기환경개선 특별대책과 미세먼지 개선- 김동영 선임연구위원(경기연구원)
O 지정토론
- 석탄화력발전과 대기오염정책- 유경선 교수(광운대학교)- 수도권 대기환경개선 특별대책과 미세먼지 개선
1. 수도권 대기환경개선 특별대책 개요
2. 1차 특별대책 성과와 한계
3. 대기환경관리 여건
4. 수도권 특별대책의 주요 내용
5. 6.3 정부 특별대책의 내용과 특징
6. 경기도 중점 추진과제
- 석탄화력발전과 대기오염정
Reaction kinetics of in a thermogravimetric analyzer
학위논문(석사) - 한국과학기술원 : 화학공학과, 1992, [ viii, 107 p. ]한국과학기술원 : 화학공학과
흡수제/촉매를 이용한 동시제거 연구
학위논문(박사) - 한국과학기술원 : 화학공학과, 1996.2, [ xvii, 209 p. ]To determine the characteristics of simulataneous removal reaction of and from flue gas over sorbent/catalyst, desulfurization and denitrification reaction of sorbent/catalyst have been determined in a thermogravimetric analyzer (TGA) and fixed bed reactor, respectiviely. Optimum operating condition of simultaneous removal reaction of over sorbent/catalyst has been determined in a fixed bed reactor.
The sulfation degree of alumina support in terms of the amount of sulfate ions presents on the support can be classified into three types (surface, slightly deep and bulk sulfations) as a function of reaction temperature and CuO loading. Surface sulfation (sulfate ions <2.0\times10^{18} ions/㎡) occurs at CuO loading between 2-11wt% at reaction temperature 250-350℃, slightly deep sulfation (2.0\times10^{18} ions/㎡<sulfate ions<3.4\times10^{18} ions/㎡) occurs with the loading below 4wt% at 350-600℃, and bulk sulfation (3.4\times10^{18} ions/㎡<sulfate ions) occurs at the loading above 6wt% at 450-600℃. The bulk sulfation of alumina occurs in the presence of decomposed from . The main product of deep sulfation is which is identified by XRD peak at 2 θ = 25.4. With an addition of 5wt% NaCl, bulk sulfation occurs at lower temperature by 50℃ and lower CuO loading by 2wt% CuO.
Rate of bulk sulfation increases with increasing gas velocity and then decreases with maximum value at 1.0 liter/min. It also decreases with decreasing the particle size and bulk sulfation does not occur above the size of 100㎛. These are caused from the increase of outward diffusion rate of which is produced inside the particle from the decomposition of . However, bulk sulfation rate of 100㎛ particles increases again with increasing sample weight because sulfation reaction between and alumina resumes.
Effect of heat treatment temperature and time ...한국과학기술원 : 화학공학과
