盐封后碳化钼电催化剂的制备及其氢析出性能（英文）

碳化钼具有低廉的价格、优越的催化性能以及良好的稳定性而被人们认为是极好的可以替代Pt等贵金属的氢析出反应（HER）催化剂。本工作采用钼酸钠和2,6-二氨基吡啶为反应原料,之后不断进行...supported by the National Key Research and Development Program of China(2017YFA0206500);; the National Natural Science Foundation of China(21773198,U1705253)~

Design and Fabrication of the Electrolytic Cell with Silicon-Based Boron-Doped Diamond Electrode and Its Feasibility forin-Situ Nuclear Magnetic Resonance Study

电化学与核磁共振波谱联用技术（EC-NMR）可以实时监测电化学反应过程,从分子水平阐释反应机理,是一种非常有前景的无损在线检测技术。本文首次报道以硅基硼掺金刚石（Si/BDD）作为工作电极的原位EC-NMR三电极单室电解池的设计和制作。研究表明,由于尺寸12.5 mm × 1.2 mm × 0.5 mm的Si/BDD电极在核磁检测区的体积较小且电极材料厚度较薄,因此该电极对射频场的阻碍较小,对磁场均匀性破坏也相应较小。运用自制的EC-NMR电解池并以经典的对苯二酚（QH 2）电氧化生成对苯二醌（Q）作为模型体系,原位研究了该电化学反应的整个动态过程。在1.2 V恒电位下电解0.1 mol·L-1 QH2 64分钟,监测到位于位于6.83 ppm处的Q特征峰逐渐生成,反应过程中核磁谱峰未发生裂分或明显的展宽。结果表明,应用本文所设计并制备的原位EC-NMR电解池,可有效对电化学反应物和产物进行定性、定量分析,将可在后续的电化学原位核磁波谱研究中发挥重要作用。In-situ EC-NMR technique can be used to monitor the electrochemical reaction process in real-time and to explain the reaction mechanism at the molecular level, which is a promising and non-destructive online detection technology. This article for the first time reports the design and production of in-situEC-NMR three-electrode single-chamber electrolytic cell using silicon-based boron-doped diamond (Si/BDD) as the working electrode. Research shows that the geometric size of Si/BDD electrode being 12.5 mm 1.2 mm 0.5 mm in the NMR detection zone is small and the thickness of the electrode material is thin, which accounts for the less hindrance to the radio frequency field, and correspondingly the less damage to the uniformity of the magnetic field. The developed EC-NMR electrolytic cell was tested, and a classic electrochemical reaction of electrooxidation from hydroquinone (QH2) to benzoquinone (Q) was used as a model system to study the entire dynamic process in-situ. After electrolysis of 0.1 mol·L-1 QH2 at a constant potential of 1.2 V for 64 min, it is detected that the characteristic peak intensity of QH2 at 6.58 ppm was gradually decreased, and the characteristic Q peak at 6.83 ppm was gradually generated. The NMR spectrum peak did not split or broaden significantly during the reaction. The results demonstrate that the in-situ EC-NMR electrolytic cell designed and prepared in this paper can be effectively used for the qualitative and quantitative analyses of the reactants and products in electrochemical reactions, which thus will play an important role in the subsequent researches on electrochemical in-situ NMR spectroscopy.国家重点研发计划项目(2017YFA0206500);国家自然科学基金项目(21974117)通讯作者:曹烁晖,孙世刚E-mail:[email protected];[email protected]:Shuo-HuiCao,Shi-GangSunE-mail:[email protected];[email protected].厦门大学化学化工学院,福建 厦门 3610052.厦门大学电子科学与技术学院,福建 厦门 3610053.昆明贵金属研究所,云南 昆明 6501061. College of Chemistry and Chemical Engineering, Xiamen University Xiamen 361005 Fujian, China2. School of Electronic Science and Engineering, Xiamen University Xiamen 361005, Fujian3. Kunming Institute of Precious Metals, Kunming 650106, Yunan, Chin