A programmable microsystem using system-on-chip for real-time biotelemetry

A telemetry microsystem, including multiple sensors, integrated instrumentation and a wireless interface has been implemented. We have employed a methodology akin to that for System-on-Chip microelectronics to design an integrated circuit instrument containing several "intellectual property" blocks that will enable convenient reuse of modules in future projects. The present system was optimized for low-power and included mixed-signal sensor circuits, a programmable digital system, a feedback clock control loop and RF circuits integrated on a 5 mm × 5 mm silicon chip using a 0.6 μm, 3.3 V CMOS process. Undesirable signal coupling between circuit components has been investigated and current injection into sensitive instrumentation nodes was minimized by careful floor-planning. The chip, the sensors, a magnetic induction-based transmitter and two silver oxide cells were packaged into a 36 mm × 12 mm capsule format. A base station was built in order to retrieve the data from the microsystem in real-time. The base station was designed to be adaptive and timing tolerant since the microsystem design was simplified to reduce power consumption and size. The telemetry system was found to have a packet error rate of 10<sup>-</sup><sup>3</sup> using an asynchronous simplex link. Trials in animal carcasses were carried out to show that the transmitter was as effective as a conventional RF device whilst consuming less power

6G Radio Testbeds: Requirements, Trends, and Approaches

The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more realistic conditions. This paper clarifies the requirements for 6G radio testbeds, reveals trends, and introduces approaches towards their development

ATTO: Wireless Networking at Fiber Speed

ATTO targets wireless networking at fiber speed: 100 Gb/s/m(2) with latencies smaller than 10 mu s. To provide this tremendous wireless capacity, ultrasmall floor-integrated cells are proposed. In this way, short-reach communication can be established, reducing the effect of interference and providing full frequency reuse in the wireless domain. Radio frequency (RF)-overfiber coherent communication and a dedicated 2-D passive optical network structure support the interconnection and selection of the cells and minimize the required transceiver electronics. To evaluate the feasibility of the proposed architecture, key principles are validated at lower frequency bands. Two main building blocks are addressed in this paper: a fully passive opto-antenna to prove that a passive remote antenna head can be realized owing to the short transmission distances. Furthermore, a low-cost RF-overfiber system is demonstrated: sigma-delta modulation drives nonlinear optical modulators, such as electroabsorption modulators and vertical-cavity surface-emitting lasers, using a digital transmitter while remaining compatible with the passive opto-antenna. Finally, two important properties of the ATTO floor are evaluated. The exposure of a human body model to RF fields by the antenna floor. Measurements ensure a 200-fold margin with respect to the International Commission on Non-Ionizing Radiation Protection basic restriction. To guarantee that multiple devices can communicate with the ATTO floor simultaneously, the interference between cells spaced 300 mm apart was evaluated

5G Positioning and Mapping with Diffuse Multipath

5G mmWave communication is useful for positioning due to the geometric connection between the propagation channel and the propagation environment. Channel estimation methods can exploit the resulting sparsity to estimate parameters(delay and angles) of each propagation path, which in turn can be exploited for positioning and mapping. When paths exhibit significant spread in either angle or delay, these methods breakdown or lead to significant biases. We present a novel tensor-based method for channel estimation that allows estimation of mmWave channel parameters in a non-parametric form. The method is able to accurately estimate the channel, even in the absence of a specular component. This in turn enables positioning and mapping using only diffuse multipath. Simulation results are provided to demonstrate the efficacy of the proposed approach

Intelligent Reflective Surface Deployment in 6G: A Comprehensive Survey

Intelligent reflecting surfaces (IRSs) are considered a promising technology that can smartly reconfigure the wireless environment to enhance the performance of future wireless networks. However, the deployment of IRSs still faces challenges due to highly dynamic and mobile unmanned aerial vehicle (UAV) enabled wireless environments to achieve higher capacity. This paper sheds light on the different deployment strategies for IRSs in future terrestrial and non-terrestrial networks. Specifically, in this paper, we introduce key theoretical concepts underlying the IRS paradigm and discuss the design aspects related to the deployment of IRSs in 6G networks. We also explore optimization-based IRS deployment techniques to improve system performance in terrestrial and aerial IRSs. Furthermore, we survey model-free reinforcement learning (RL) techniques from the deployment aspect to address the challenges of achieving higher capacity in complex and mobile IRS-assisted UAV wireless systems. Finally, we highlight challenges and future research directions from the deployment aspect of IRSs for improving system performance for the future 6G network.Comment: 16 pages, 3 Figures, 7 table

Ultra-reliable communications for industrial internet of things : design considerations and channel modeling

Factory automation is the next industrial revolution. 5G and IIoT are enabling smart factories to seamlessly create a network of wirelessly connected machines and people that can instantaneously collect, analyze, and distribute real-time data. A 5G-enabled communication network for IIOT will boost overall efficiency, launching a new era of market opportunities and economic growth. This article presents the 5G-enabled system architecture and ultra-reliable use cases in smart factories associated with automated warehouses. In particular, for URLLC-based cases, key techniques and their corresponding solutions, including diversity for high reliability, short packets for low latency, and on-the-fly channel estimation and decoding for fast receiver processing, are discussed. Then the channel modeling requirements concerning technologies and systems are also identified in industrial scenarios. Ray tracing channel simulation can meet such requirements well, and based on that, the channel characteristic analysis is presented at 28 and 60 GHz for licensed and unlicensed band frequencies to exploit the available degrees of freedom in the channels. © 2012 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Muhammad Imran” is provided in this record*