1,644 research outputs found
The HoverMesh: a deformable structure based on vacuum cells: new advances in the research of tangible user interfaces
In this paper we propose a novel attempt to develop a spatial tangible user interface (TUI) [1] based on a deformable structure, the so-called HoverMesh. It consists of a stiff cubical, whose upper wall is composed of a deformable mesh of particle filled inflatable cells. This mesh can be deformed by inflating and/or deflating the cubical while consolidating (evacuating) and/or releasing (inflating) the cells. The HoverMesh is both an input and output device and we see its major benefit in the wide interaction area. The haptic feedback modality is thus embedded as well. The first results in our early experiments sustain the concept of a mesh based on inflatable cells
Haptics: Science, Technology, Applications
This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility
ShapeBots: Shape-changing Swarm Robots
We introduce shape-changing swarm robots. A swarm of self-transformable
robots can both individually and collectively change their configuration to
display information, actuate objects, act as tangible controllers, visualize
data, and provide physical affordances. ShapeBots is a concept prototype of
shape-changing swarm robots. Each robot can change its shape by leveraging
small linear actuators that are thin (2.5 cm) and highly extendable (up to
20cm) in both horizontal and vertical directions. The modular design of each
actuator enables various shapes and geometries of self-transformation. We
illustrate potential application scenarios and discuss how this type of
interface opens up possibilities for the future of ubiquitous and distributed
shape-changing interfaces.Comment: UIST 201
Recommended from our members
Mechanical Design and Analysis: High-Precision Microcontact Printhead for Roll-to-Roll Printing of Flexible Electronics
Flexible electronics have demonstrated potential in a wide range of applications including wearable sensors, photovoltaics, medical devices and more, due to their properties of extreme adaptability while also being lightweight and highly robust. The main challenge standing in the way of progress in this field is the difficulty of large-scale manufacturing of these flexible electronics compared to their rigid counterparts. Microcontact printing is a form of soft lithography in which an elastomeric stamp is used to transfer sub-micron scale surface patterns onto a flexible substrate via ink monolayers. The integration of microcontact printing into a roll-to-roll (R2R) system will enable continuous printing of flexible electronics and scale it up for massive manufacturing. The proposed thesis outlines a novel mechanical design for a microcontact printer which utilizes flexural motion stages with integrated position and force sensors to control the print process on a R2R system. The printhead is designed to fit the available space on the pre-installed UMass Amherst Intelligent Sensing Laboratory test table and breadboard. The R2R system includes motorized rollers for winding/unwinding the PET (polyethylene terephthalate) web substrate, and idler rollers for guiding a web through the print system. As the central element to this design, two matching plate flexures are designed on the two ends of the printer roller to control the tilting and positioning of the print roller. Flexure mechanisms rely on bending and torsion of flexible elements: this allows them to achieve much higher precision in positioning compared to conventional mechanisms which rely on surface interaction between multiple moving parts. The print resolution target for this design is 500 nm (linewidth), based on current state-of-the-art designs [1, 2]. In the initial version of the printhead design, a total of 33 parts are custom fabricated for assembly and installation in the R2R system lab setup. These include everything from the components of the print roller, specially adapted air-bearing mounts, support structures, and connectors. The design and 4 fabrication process for every component is outlined here along with the functionality, as every component was designed with the system objectives and constraints in mind. Using SolidWorks simulation, FEA (finite element analysis) is performed for every part of the assembly that is subjected to stress in the real system, so that predictions can be made about the displacement of the motion stages and the frequency of vibration. These predictions are evaluated by comparation with the experimental results from tests conducted on the real system hardware and used to assess the quality of the fabricated assembly. The work performed in this thesis enables advancements in the assembly of an updated, optimized R2R system and has led to an experimentally functioning lab setup that is ripe for further improvements. Completion and calibration of this augmented R2R system will, in future, enable UMass Amherst in-house production of large-area flexible electronics which may be used in a wide range of applications, including medical sensors, solar cells, displays, and more. In addition to microcontact printing, this R2R system may also be applied to nanoimprint lithography, another contact-based print method, or integrated with inkjet printing, a non-contact method
Recommended from our members
ReSCon '11, Research Student Conference: Book of Abstracts
The fourth SED Research Student Conference (ReSCon2011) was hosted over three days, 20-22 June 2011, in the Hamilton Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. which focused on current research being conducted within the School of Engineering and Design by postgraduate research students from the School. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School
Haptics: Science, Technology, Applications
This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility
- …