Peran Sikap Dalam Memediasi Pengaruh Pengetahuan Terhadap Perilaku Minimisasi Sampah Pada Masyarakat Terban, YOGYAKARTA (the Role of Attitude to Mediate the Effect of Knowledge on People\u27s Waste Minimization Behaviour in Terban, YOGYAKARTA)

Environmental quality in Indonesia today is in poor condition. Many of these problems root in human behaviour. One way to solve this problem is by increasing people\u27s environmental knowledge which is translated into pro-environmental behaviour. However, empirical evidence showed that high level of environmental knowledge is not always followed by high level of environmental behaviour. Attitude toward behaviour plays a significant role in behavioural change. This research will focus on one kind of pro-environmental behaviour namely waste minimisastion behaviour. The purpose of this research is to find out the relationship between waste minimization knowledge, attitude, and behaviour. This research was conducted in Kelurahan Terban, RW 02 and RW 11, Yogyakarta in January until February 2014. Total of the subjects are 105. Data were collected using three scales that is: waste minimization behaviour scale, waste minimization attitude scale, and waste minimization knowledge scale. Data were analysed using regression analysis with path analysis model. Sobel Test was used to estimate the mediation effect. Indirect effect analysis showed the indirect effect coeficient was 0,742 with z=3,42 and p <0,01. It is showed that there was an indirect effect of waste minimization knowledge to waste minimization behaviour through waste minimization attitude. Thus, we can conclude that waste minimization attitude mediates the relationship between waste minimization knowledge and waste minimization behaviour

Economic analysis and optimization for bio-hydrogen production from oil palm waste via steam gasification

Biomass steam gasification with in-situ carbon dioxide capture using CaO exhibits good prospects for the production of hydrogen rich gas. In Malaysia, due to abundance of palm waste, it is a good candidate to be used as a feedstock for hydrogen production. The present work focuses on the mathematical modeling of detailed economic analysis and cost minimization of the flowsheet design for hydrogen production from palm waste using MATLAB. The influence of the operating parameters on the economics is performed. It is predicted that hydrogen cost decreasing by increasing both temperature and steam/biomass ratio. Meanwhile, the hydrogen cost increases when increasing sorbent/biomass ratio. Cost minimization solves to give optimum cost of 1.9105 USD/kg with hydrogen purity, hydrogen yield, hydrogen efficiency and thermodynamic efficiency are 79.9 mol%, 17.97 g/hr, 81.47% and 79.85% respectively. The results indicate that this system has the potential to offer low production cost for hydrogen production from palm waste

Causative factors of construction and demolition waste generation in Iraq Construction Industry

The construction industry has hurt the environment from the waste generated during construction activities. Thus, it calls for serious measures to determine the causative factors of construction waste generated. There are limited studies on factors causing construction, and demolition (C&D) waste generation, and these limited studies only focused on the quantification of construction waste. This study took the opportunity to identify the causative factors for the C&D waste generation and also to determine the risk level of each causal factor, and the most important minimization methods to avoiding generating waste. This study was carried out based on the quantitative approach. A total of 39 factors that causes construction waste generation that has been identified from the literature review were considered which were then clustered into 4 groups. Improved questionnaire surveys by 38 construction experts (consultants, contractors and clients) during the pilot study. The actual survey was conducted with a total of 380 questionnaires, received with a response rate of 83.3%. Data analysis was performed using SPSS software. Ranking analysis using the mean score approach found the five most significant causative factors which are poor site management, poor planning, lack of experience, rework and poor controlling. The result also indicated that the majority of the identified factors having a high-risk level, in addition, the better minimization method is environmental awareness. A structural model was developed based on the 4 groups of causative factors using the Partial Least Squared-Structural Equation Modelling (PLS-SEM) technique. It was found that the model fits due to the goodness of fit (GOF ≥ 0.36= 0.658, substantial). Based on the outcome of this study, 39 factors were relevant to the generation of construction and demolition waste in Iraq. These groups of factors should be avoided during construction works to reduce the waste generated. The findings of this study are helpful to authorities and stakeholders in formulating laws and regulations. Furthermore, it provides opportunities for future researchers to conduct additional research’s on the factors that contribute to construction waste generation

A study on awareness of household waste separation in Parit Raja, Batu Pahat, Johor: rural areas

Malaysia is embarking on green initiatives which have been expressly stipulated in the Eleventh Malaysia Plan (2016-2020). In order to transform ideas into reality, the government has identified six strategic thrusts and six game changers that will help Malaysia to stay ahead of global challenges and opportunities in the next five years. In one of the strategic thrusts, the government has planned a greener trajectory for sustainability and resilience [1]. As a result, governmental agencies such as the Department of Environment (DOE) has been given the mandate to conserve and protect the environment and its natural resources for present and future generations. Among the ways applied by the government for solving environmental problems, especially waste generation, include waste minimization, compost and incineration. The Public Cleansing Management Act 2007 (SWPCM Act 2007) came into force on 1 September 2011. It was administered by the Ministry of Housing and Local Government. The main objective of the act is to regulate the management of controlled solid waste and to ensure high-quality services in solid waste management [2]. Apart from the government, the community should also play its role in minimizing waste generation at household level

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generatio

Approaches to Construction Waste Management in Malaysia

The concept of construction waste management was introduced a long time ago but the effort of waste minimization has, for the most part, merely been observed and not practiced. Additionally, an increasing allocation of landfills has indicated a growing production of waste. However, the allocation of funding or skills for the prevention of waste has been scarce as waste minimization has not been given enough attention. One such example is the undertaking of different stages of construction, which often does not account for future problems in construction waste. Hence, this study is intended to investigate common waste management practices on construction sites in Malaysia. As part of this investigation, site observations and questionnaires were conducted to collect information from the respondents. Comprehensive literature reviews also helped to understand the latest norms as well as previous practices in waste management. The results reflected that certain areas of knowledge and implementation showed great gaps with the same mistakes appearing frequently, pointing to the conclusion that known causes of excess waste are often not rectified and suggestions for improvement are not fully incorporated in standard practices

The Waste Minimizing Economy: A Consideration of Set Up Problems on the Production Side

In this paper we shall be concerned principally with the problem of waste-minimization in the production process. We shall not be concerned with the technological aspect which tends to consider waste-minimization as an isolated problem relative to a particular process or processes, but rather with the systems aspect which considers waste minimization relative to an entire system of processes by highlighting on the possible interrelations between all the processes and their wastes

Food waste minimisation practices

In order to achieve an efficient waste minimisation, there is a need to be an understanding on the awareness of the waste minimisation in the major food operator including cafeteria. Thus, this chapter provide an observation of the waste minimisation at several cafeterias which include of manageable and unmanageable waste systems. This chapter will explain how the cafeteria is doing to cut back on or at least recycle the huge amount of food waste or cooking waste for waste minimization. Case studies were conducted at the Sis Wani House of Catering, Enayati Cafeteria and Hadramawt Cafeteria in UTHM campus. Determination of the level of knowledge about waste minimization among cafeteria workers and customers (students) were studied to measure the awareness on waste minimization

The impact of green buildings accreditation on construction and demolition waste minimization: A study of Hong Kong Building Environment Assessment Method using big data.

Workshop 8: WS8.12Construction and demolition (C&D) waste often constitutes a prodigious portion of the total municipal solid waste in contributing to the environment degradation. C&D waste minimization, which is a sustainable activity for both environment and material resources, serves as an indispensible element of green building assessment systems worldwide. How green building accreditation impacts on C&D waste minimization is a valid and important research question for green building award applicants, policy-makers and other stakeholders, which was seldom studied using a quantitative approach. Therefore, this paper aims to quantify the waste minimization which existing green building assessment system can be used to achieve by analyzing a big dataset of C&D waste management recorded in 2011, 2012, 2013, 2014 and 2015 in Hong Kong. The waste generation rates are compared between buildings awarded with and without Hong Kong Building Environment Assessment Method (HK-BEAM) prizes to illustrate the impact of HK-BEAM on C&D waste minimization. The research findings will not only present accurately quantified effect on CWM led by green building accreditation, but also provide stakeholders with a reference for making strategies and policies on C&D waste management and green building.preprin

Landfill aeration for emission control before and during landfill mining

The landfill of Modena, in northern Italy, is now crossed by the new high velocity railway line connecting Milan and Bologna. Waste was completely removed from a part of the landfill and a trench for the train line was built. With the aim of facilitating excavation and further disposal of the material extracted, suitable measures were defined. In order to prevent undesired emissions into the excavation area, the aerobic in situ stabilisation by means of the Airflow technology took place before and during the Landfill Mining. Specific project features involved the pneumatic leachate extraction from the aeration wells (to keep the leachate table low inside the landfill and increase the volume of waste available for air migration) and the controlled moisture addition into a limited zone, for a preliminary evaluation of the effects on process enhancement. Waste and leachate were periodically sampled in the landfill during the aeration before the excavation, for quality assessment over time; the evolution of biogas composition in the landfill body and in the extraction system for different plant set-ups during the project was monitored, with specific focus on uncontrolled migration into the excavation area. Waste biological stability significantly increased during the aeration (waste respiration index dropped to 33% of the initial value after six months). Leachate head decreased from 4 to 1.5m; leachate recirculation tests proved the beneficial effects of moisture addition on temperature control, without hampering waste aerobization. Proper management of the aeration plant enabled the minimization of uncontrolled biogas emissions into the excavation area