110,652 research outputs found
Optimization of the SiC Powder Source Material for Improved Process Conditions During PVT Growth of SiC Boules
We have studied the influence of different SiC powder size distributions and the sublimation behavior during physical vapor transport growth of SiC in a 75 mm and 100 mm crystal processing configuration. The evolution of the source material as well as of the crystal growth interface was carried out using in situ 3D X-ray computed tomography (75 mm crystals) and in situ 2D X-ray visualization (100 mm crystals). Beside the SiC powder size distribution, the source materials differed in the maximum packaging density and thermal properties. In this latter case of the highest packaging density, the in situ X-ray studies revealed an improved growth interface stability that enabled a much longer crystal growth process. During process time, the sublimation-recrystallization behavior showed a much smoother morphology change and slower materials consumption, as well as a much more stable shape of the growth interface than in the cases of the less dense SiC source. By adapting the size distribution of the SiC source material we achieved to significantly enhance stable growth conditions
Electro-osmotic Instability of Concentration Enrichment in Curved Geometries for an Aqueous Electrolyte
We report that an electro-osmotic instability of concentration enrichment in
curved geometries for an aqueous electrolyte, as opposed to the well-known one,
is initiated exclusively at the enriched interface (anode), rather than at the
depleted one (cathode). For this instability, the limitation of unrealistically
high material Peclet number in planar geometry is eliminated by the strong
electric field arising from the line charge singularity. In a model setup of
concentric circular electrodes, we show by stability analysis, numerical
simulation, and experimental visualization that instability occurs at the inner
anode, below a critical radius of curvature. The stability criterion is also
formulated in terms of a critical electric field and extended to arbitrary (2d)
geometries by conformal mapping. This discovery suggests that transport may be
enhanced in processes limited by salt enrichment, such as reverse osmosis, by
triggering this instability with needle-like electrodes.Comment: 5 pages, 4 figure
Recommended from our members
Requirements for building information modeling based lean production management systems for construction
Smooth flow of production in construction is hampered by disparity between individual trade teams' goals and the goals of stable production flow for the project as a whole. This is exacerbated by the difficulty of visualizing the flow of work in a construction project. While the addresses some of the issues in Building information modeling provides a powerful platform for visualizing work flow in control systems that also enable pull flow and deeper collaboration between teams on and off site. The requirements for implementation of a BIM-enabled pull flow construction management software system based on the Last
Planner System™, called ‘KanBIM’, have been specified, and a set of functional mock-ups of the proposed system has been implemented and evaluated in a series of three focus group workshops. The requirements cover the areas of maintenance of work flow stability, enabling negotiation and commitment between teams, lean production planning with sophisticated pull flow control, and effective communication and visualization of flow. The evaluation results show that the system holds the potential to improve work flow and reduce waste by providing both process and product visualization at the work face
Structures in stratified plane mixing layers and the effects of cross-shear
A two-dimensional temporal mixing layer is generated in a stratified tilting tank similar to that used by Thorpe (1968). Extensive flow dynamics visualization is carried out using, for the top and bottom layers, fluids of different densities but of the same index of refraction. The two-dimensional density field is measured with the laser-induced fluorescence technique (LIF). The study examines further the classical problem of the two-dimensional mixing layer and explores the effects of cross-shear on a nominally two-dimensional mixing layer, a situation widespread in complex industrial and natural flows. Cross-shear is another component of shear, in plane with but perpendicular to the main shear of the base flow, generated by tilting the tank around a second axis
Recommended from our members
Revealing Nanoscale Solid-Solid Interfacial Phenomena for Long-Life and High-Energy All-Solid-State Batteries.
Enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against sulfide solid electrolytes. While protective oxide coating layers such as LiNbO3 (LNO) have been proposed, its precise working mechanisms are still not fully understood. Existing literature attributes reductions in interfacial impedance growth to the coating's ability to prevent interfacial reactions. However, its true nature is more complex, with cathode interfacial reactions and electrolyte electrochemical decomposition occurring simultaneously, making it difficult to decouple each effect. Herein, we utilized various advanced characterization tools and first-principles calculations to probe the interfacial phenomenon between solid electrolyte Li6PS5Cl (LPSCl) and high-voltage cathode LiNi0.85Co0.1Al0.05O2 (NCA). We segregated the effects of spontaneous reaction between LPSCl and NCA at the interface and quantified the intrinsic electrochemical decomposition of LPSCl during cell cycling. Both experimental and computational results demonstrated improved thermodynamic stability between NCA and LPSCl after incorporation of the LNO coating. Additionally, we revealed the in situ passivation effect of LPSCl electrochemical decomposition. When combined, both these phenomena occurring at the first charge cycle result in a stabilized interface, enabling long cyclability of all-solid-state batteries
MFC: An open-source high-order multi-component, multi-phase, and multi-scale compressible flow solver
MFC is an open-source tool for solving multi-component, multi-phase, and bubbly compressible flows. It is capable of efficiently solving a wide range of flows, including droplet atomization, shock–bubble interaction, and bubble dynamics. We present the 5- and 6-equation thermodynamically-consistent diffuse-interface models we use to handle such flows, which are coupled to high-order interface-capturing methods, HLL-type Riemann solvers, and TVD time-integration schemes that are capable of simulating unsteady flows with strong shocks. The numerical methods are implemented in a flexible, modular framework that is amenable to future development. The methods we employ are validated via comparisons to experimental results for shock–bubble, shock–droplet, and shock–water-cylinder interaction problems and verified to be free of spurious oscillations for material-interface advection and gas–liquid Riemann problems. For smooth solutions, such as the advection of an isentropic vortex, the methods are verified to be high-order accurate. Illustrative examples involving shock–bubble-vessel-wall and acoustic–bubble-net interactions are used to demonstrate the full capabilities of MFC
Controlled interfacial assembly of 2D curved colloidal crystals and jammed shells
Assembly of colloidal particles on fluid interfaces is a promising technique
for synthesizing two-dimensional micro-crystalline materials useful in fields
as diverse as biomedicine1, materials science2, mineral flotation3 and food
processing4. Current approaches rely on bulk emulsification methods, require
further chemical and thermal treatments, and are restrictive with respect to
the materials employed5-9. The development of methods that exploit the great
potential of interfacial assembly for producing tailored materials have been
hampered by the lack of understanding of the assembly process. Here we report a
microfluidic method that allows direct visualization and understanding of the
dynamics of colloidal crystal growth on curved interfaces. The crystals are
periodically ejected to form stable jammed shells, which we refer to as
colloidal armour. We propose that the energetic barriers to interfacial crystal
growth and organization can be overcome by targeted delivery of colloidal
particles through hydrodynamic flows. Our method allows an unprecedented degree
of control over armour composition, size and stability.Comment: 18 pages, 5 figure
A novel haptic model and environment for maxillofacial surgical operation planning and manipulation
This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone
- …