Visual servoing of nonholonomic cart

This paper presents a visual feedback control scheme for a nonholonomic cart without capabilities for dead reckoning. A camera is mounted on the cart and it observes cues attached on the environment. The dynamics of the cart are transformed into a coordinate system in the image plane. An image-based controller which linearizes the dynamics is proposed. Since the positions of the cues in the image plane are controlled directly, possibility of missing cues is reduced considerably. Simulations are carried out to evaluate the validity of the proposed scheme. Experiments on a radio controlled car with a CCD camera are also given</p

Technical report on Optimization-Based Bearing-Only Visual Homing with Applications to a 2-D Unicycle Model

We consider the problem of bearing-based visual homing: Given a mobile robot which can measure bearing directions with respect to known landmarks, the goal is to guide the robot toward a desired "home" location. We propose a control law based on the gradient field of a Lyapunov function, and give sufficient conditions for global convergence. We show that the well-known Average Landmark Vector method (for which no convergence proof was known) can be obtained as a particular case of our framework. We then derive a sliding mode control law for a unicycle model which follows this gradient field. Both controllers do not depend on range information. Finally, we also show how our framework can be used to characterize the sensitivity of a home location with respect to noise in the specified bearings. This is an extended version of the conference paper [1].Comment: This is an extender version of R. Tron and K. Daniilidis, "An optimization approach to bearing-only visual homing with applications to a 2-D unicycle model," in IEEE International Conference on Robotics and Automation, 2014, containing additional proof

Active Sensing for Dynamic, Non-holonomic, Robust Visual Servoing

We consider the problem of visually servoing a legged vehicle with unicycle-like nonholonomic constraints subject to second-order fore-aft dynamics in its horizontal plane. We target applications to rugged environments characterized by complex terrain likely to perturb significantly the robot’s nominal dynamics. At the same time, it is crucial that the camera avoid “obstacle” poses where absolute localization would be compromised by even partial loss of landmark visibility. Hence, we seek a controller whose robustness against disturbances and obstacle avoidance capabilities can be assured by a strict global Lyapunov function. Since the nonholonomic constraints preclude smooth point stabilizability we introduce an extra degree of sensory freedom, affixing the camera to an actuated panning axis mounted on the robot’s back. Smooth stabilizability to the robot-orientation-indifferent goal cycle no longer precluded, we construct a controller and strict global Lyapunov function with the desired properties. We implement several versions of the scheme on a RHex robot maneuvering over slippery ground and document its successful empirical performance. For more information: Kod*La

Visual Servoing for Nonholonomically Constrained Three Degree of Freedom Kinematic Systems

This paper addresses problems of robot navigation with nonholonomic motion constraints and perceptual cues arising from onboard visual servoing in partially engineered environments. We propose a general hybrid procedure that adapts to the constrained motion setting the standard feedback controller arising from a navigation function in the fully actuated case. This is accomplished by switching back and forth between moving down and across the associated gradient field toward the stable manifold it induces in the constrained dynamics. Guaranteed to avoid obstacles in all cases, we provide conditions under which the new procedure brings initial configurations to within an arbitrarily small neighborhood of the goal. We summarize simulation results on a sample of visual servoing problems with a few different perceptual models. We document the empirical effectiveness of the proposed algorithm by reporting the results of its application to outdoor autonomous visual registration experiments with the robot RHex guided by engineered beacons

Challenges and Solutions for Autonomous Robotic Mobile Manipulation for Outdoor Sample Collection

In refinery, petrochemical, and chemical plants, process technicians collect uncontaminated samples to be analyzed in the quality control laboratory all time and all weather. This traditionally manual operation not only exposes the process technicians to hazardous chemicals, but also imposes an economical burden on the management. The recent development in mobile manipulation provides an opportunity to fully automate the operation of sample collection. This paper reviewed the various challenges in sample collection in terms of navigation of the mobile platform and manipulation of the robotic arm from four aspects, namely mobile robot positioning/attitude using global navigation satellite system (GNSS), vision-based navigation and visual servoing, robotic manipulation, mobile robot path planning and control. This paper further proposed solutions to these challenges and pointed the main direction of development in mobile manipulation

An optimization approach to bearing-only visual homing with applications to a 2-D unicycle model

Abstract-We consider the problem of bearing-based visual homing: Given a mobile robot which can measure bearing directions corresponding to known landmarks, the goal is to guide the robot toward a desired &quot;home&quot; location. We propose a control law based on the gradient field of a Lyapunov function, and give sufficient conditions for global convergence. We show that the well-known Average Landmark Vector method (for which no convergence proof was known) can be obtained as a particular case of our framework. We then derive a sliding mode control law for a unicycle model which follows this gradient field. Both controllers do not depend on range information. Finally, we also show how our framework can be used to characterize the sensitivity of a home location with respect to noise in the specified bearings