Improving Displacement Measurement for Evaluating Longitudinal Road Profiles

2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper introduces a half-wavelength peak matching (HWPM) model, which improves the accuracy of vehicle based longitudinal road profilers used in evaluating road unevenness and mega-textures. In this application, the HWPM model is designed for profilers which utilize a laser displacement sensor with an accelerometer for detecting surface irregularities. The process of converting acceleration to displacement by double integration (which is used in most rofilers) is error-prone, and although there are techniques to minimize the effect of this error, this paper proposes a novel approach for improving the generated road profile results. The technique amends the vertical displacement derived from the accelerometer samples, by using data from the laser displacement sensor as a reference. The vehicle based profiler developed for this experiment (which uses the HWPM model) shows a huge improvement in detected longitudinal irregularities when compared with pre-processed results, and uses a 3-m rolling straight edge as a benchmark.Peer reviewe

Microwave detection of buried mines using non-contact, synthetic near-field focusing

Existing ground penetrating radars (GPR) are limited in their 3-D resolution. For the detection of buried land-mines, their performance is also seriously restricted by `clutter'. Previous work by the authors has concentrated on removing these limitations by employing multi-static synthetic focusing from a 2-D real aperture. This contribution presents this novel concept, describes the proposed implementation, examines the influence of clutter and of various ground features on the system's performance, and discusses such practicalities as digitisation and time-sharing of a single transmitter and receiver. Experimental results from a variety of scenarios are presented

Radar systems for a polar mission, volume 3, appendices A-D, S, T

Success is reported in the radar monitoring of such features of sea ice as concentration, floe size, leads and other water openings, drift, topographic features such as pressure ridges and hummocks, fractures, and a qualitative indication of age and thickness. Scatterometer measurements made north of Alaska show a good correlation with a scattering coefficient with apparent thickness as deduced from ice type analysis of stereo aerial photography. Indications are that frequencies from 9 GHz upward seem to be better for sea ice radar purposes than the information gathered at 0.4 GHz by a scatterometer. Some information indicates that 1 GHz is useful, but not as useful as higher frequencies. Either form of like-polarization can be used and it appears that cross-polarization may be more useful for thickness measurement. Resolution requirements have not been fully established, but most of the systems in use have had poorer resolution than 20 meters. The radar return from sea ice is found to be much different than that from lake ice. Methods to decrease side lobe levels of the Fresnel zone-plate processor and to decrease the memory requirements of a synthetic radar processor are discussed

Classification of Targets Using Statistical Features from Range FFT of mmWave FMCW Radars

publishedVersio