Energy Saving Techniques for Phase Change Memory (PCM)

In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory (PCM), which has low read latency and power; and nearly zero leakage power. However, the write latency and power of PCM are very high and this, along with limited write endurance of PCM present significant challenges in enabling wide-spread adoption of PCM. To address this, several architecture-level techniques have been proposed. In this report, we review several techniques to manage power consumption of PCM. We also classify these techniques based on their characteristics to provide insights into them. The aim of this work is encourage researchers to propose even better techniques for improving energy efficiency of PCM based main memory.Comment: Survey, phase change RAM (PCRAM

A Study on Performance and Power Efficiency of Dense Non-Volatile Caches in Multi-Core Systems

In this paper, we present a novel cache design based on Multi-Level Cell Spin-Transfer Torque RAM (MLC STTRAM) that can dynamically adapt the set capacity and associativity to use efficiently the full potential of MLC STTRAM. We exploit the asymmetric nature of the MLC storage scheme to build cache lines featuring heterogeneous performances, that is, half of the cache lines are read-friendly, while the other is write-friendly. Furthermore, we propose to opportunistically deactivate ways in underutilized sets to convert MLC to Single-Level Cell (SLC) mode, which features overall better performance and lifetime. Our ultimate goal is to build a cache architecture that combines the capacity advantages of MLC and performance/energy advantages of SLC. Our experiments show an improvement of 43% in total numbers of conflict misses, 27% in memory access latency, 12% in system performance, and 26% in LLC access energy, with a slight degradation in cache lifetime (about 7%) compared to an SLC cache

The Design of A High Capacity and Energy Efficient Phase Change Main Memory

Higher energy-efficiency has become essential in servers for a variety of reasons that range from heavy power and thermal constraints, environmental issues and financial savings. With main memory responsible for at least 30% of the energy consumed by a server, a low power main memory is fundamental to achieving this energy efficiency DRAM has been the technology of choice for main memory for the last three decades primarily because it traditionally combined relatively low power, high performance, low cost and high density. However, with DRAM nearing its density limit, alternative low-power memory technologies, such as Phase-change memory (PCM), have become a feasible replacement. PCM limitations, such as limited endurance and low write performance, preclude simple drop-in replacement and require new architectures and algorithms to be developed. A PCM main memory architecture (PMMA) is introduced in this dissertation, utilizing both DRAM and PCM, to create an energy-efficient main memory that is able to replace a DRAM-only memory. PMMA utilizes a number of techniques and architectural changes to achieve a level of performance that is par with DRAM. PMMA achieves gains in energy-delay of up to 65%, with less than 5% of performance loss and extremely high energy gains. To address the other major shortcoming of PCM, namely limited endurance, a novel, low- overhead wear-leveling algorithm that builds on PMMA is proposed that increases the lifetime of PMMA to match the expected server lifetime so that both server and memory subsystems become obsolete at about the same time. We also study how to better use the excess capacity, traditionally available on PCM devices, to obtain the highest lifetime possible. We show that under specific endurance distributions, the naive choice does not achieve the highest lifetime. We devise rules that empower the designer to select algorithms and parameters to achieve higher lifetime or simplify the design knowing the impact on the lifetime. The techniques presented also apply to other storage class memories (SCM) memories that suffer from limited endurance

Memory Management for Emerging Memory Technologies

The Memory Wall, or the gap between CPU speed and main memory latency, is ever increasing. The latency of Dynamic Random-Access Memory (DRAM) is now of the order of hundreds of CPU cycles. Additionally, the DRAM main memory is experiencing power, performance and capacity constraints that limit process technology scaling. On the other hand, the workloads running on such systems are themselves changing due to virtualization and cloud computing demanding more performance of the data centers. Not only do these workloads have larger working set sizes, but they are also changing the way memory gets used, resulting in higher sharing and increased bandwidth demands. New Non-Volatile Memory technologies (NVM) are emerging as an answer to the current main memory issues. This thesis looks at memory management issues as the emerging memory technologies get integrated into the memory hierarchy. We consider the problems at various levels in the memory hierarchy, including sharing of CPU LLC, traffic management to future non-volatile memories behind the LLC, and extending main memory through the employment of NVM. The first solution we propose is “Adaptive Replacement and Insertion" (ARI), an adaptive approach to last-level CPU cache management, optimizing the cache miss rate and writeback rate simultaneously. Our specific focus is to reduce writebacks as much as possible while maintaining or improving miss rate relative to conventional LRU replacement policy, with minimal hardware overhead. ARI reduces writebacks on benchmarks from SPEC2006 suite on average by 32.9% while also decreasing misses on average by 4.7%. In a PCM based memory system, this decreases energy consumption by 23% compared to LRU and provides a 49% lifetime improvement beyond what is possible with randomized wear-leveling. Our second proposal is “Variable-Timeslice Thread Scheduling" (VATS), an OS kernel-level approach to CPU cache sharing. With modern, large, last-level caches (LLC), the time to fill the LLC is greater than the OS scheduling window. As a result, when a thread aggressively thrashes the LLC by replacing much of the data in it, another thread may not be able to recover its working set before being rescheduled. We isolate the threads in time by increasing their allotted time quanta, and allowing larger periods of time between interfering threads. Our approach, compared to conventional scheduling, mitigates up to 100% of the performance loss caused by CPU LLC interference. The system throughput is boosted by up to 15%. As an unconventional approach to utilizing emerging memory technologies, we present a Ternary Content-Addressable Memory (TCAM) design with Flash transistors. TCAM is successfully used in network routing but can also be utilized in the OS Virtual Memory applications. Based on our layout and circuit simulation experiments, we conclude that our FTCAM block achieves an area improvement of 7.9× and a power improvement of 1.64× compared to a CMOS approach. In order to lower the cost of Main Memory in systems with huge memory demand, it is becoming practical to extend the DRAM in the system with the less-expensive NVMe Flash, for a much lower system cost. However, given the relatively high Flash devices access latency, naively using them as main memory leads to serious performance degradation. We propose OSVPP, a software-only, OS swap-based page prefetching scheme for managing such hybrid DRAM + NVM systems. We show that it is possible to gain about 50% of the lost performance due to swapping into the NVM and thus enable the utilization of such hybrid systems for memory-hungry applications, lowering the memory cost while keeping the performance comparable to the DRAM-only system

Extending Memory Capacity in Consumer Devices with Emerging Non-Volatile Memory: An Experimental Study

The number and diversity of consumer devices are growing rapidly, alongside their target applications' memory consumption. Unfortunately, DRAM scalability is becoming a limiting factor to the available memory capacity in consumer devices. As a potential solution, manufacturers have introduced emerging non-volatile memories (NVMs) into the market, which can be used to increase the memory capacity of consumer devices by augmenting or replacing DRAM. Since entirely replacing DRAM with NVM in consumer devices imposes large system integration and design challenges, recent works propose extending the total main memory space available to applications by using NVM as swap space for DRAM. However, no prior work analyzes the implications of enabling a real NVM-based swap space in real consumer devices. In this work, we provide the first analysis of the impact of extending the main memory space of consumer devices using off-the-shelf NVMs. We extensively examine system performance and energy consumption when the NVM device is used as swap space for DRAM main memory to effectively extend the main memory capacity. For our analyses, we equip real web-based Chromebook computers with the Intel Optane SSD, which is a state-of-the-art low-latency NVM-based SSD device. We compare the performance and energy consumption of interactive workloads running on our Chromebook with NVM-based swap space, where the Intel Optane SSD capacity is used as swap space to extend main memory capacity, against two state-of-the-art systems: (i) a baseline system with double the amount of DRAM than the system with the NVM-based swap space; and (ii) a system where the Intel Optane SSD is naively replaced with a state-of-the-art (yet slower) off-the-shelf NAND-flash-based SSD, which we use as a swap space of equivalent size as the NVM-based swap space