762 research outputs found
Hardware Impairments Aware Transceiver Design for Full-Duplex Amplify-and-Forward MIMO Relaying
In this work we study the behavior of a full-duplex (FD) and
amplify-and-forward (AF) relay with multiple antennas, where hardware
impairments of the FD relay transceiver is taken into account. Due to the
inter-dependency of the transmit relay power on each antenna and the residual
self-interference in an FD-AF relay, we observe a distortion loop that degrades
the system performance when the relay dynamic range is not high. In this
regard, we analyze the relay function in presence of the hardware inaccuracies
and an optimization problem is formulated to maximize the signal to
distortion-plus-noise ratio (SDNR), under relay and source transmit power
constraints. Due to the problem complexity, we propose a
gradient-projection-based (GP) algorithm to obtain an optimal solution.
Moreover, a nonalternating sub-optimal solution is proposed by assuming a
rank-1 relay amplification matrix, and separating the design of the relay
process into multiple stages (MuStR1). The proposed MuStR1 method is then
enhanced by introducing an alternating update over the optimization variables,
denoted as AltMuStR1 algorithm. It is observed that compared to GP, (Alt)MuStR1
algorithms significantly reduce the required computational complexity at the
expense of a slight performance degradation. Finally, the proposed methods are
evaluated under various system conditions, and compared with the methods
available in the current literature. In particular, it is observed that as the
hardware impairments increase, or for a system with a high transmit power, the
impact of applying a distortion-aware design is significant.Comment: Submitted to IEEE Transactions on Wireless Communication
Improving Bandwidth Efficiency in E-band Communication Systems
The allocation of a large amount of bandwidth by regulating bodies in the
70/80 GHz band, i.e., the E-band, has opened up new potentials and challenges
for providing affordable and reliable Gigabit per second wireless
point-to-point links. This article first reviews the available bandwidth and
licensing regulations in the E-band. Subsequently, different propagation
models, e.g., the ITU-R and Cane models, are compared against measurement
results and it is concluded that to meet specific availability requirements,
E-band wireless systems may need to be designed with larger fade margins
compared to microwave systems. A similar comparison is carried out between
measurements and models for oscillator phase noise. It is confirmed that phase
noise characteristics, that are neglected by the models used for narrowband
systems, need to be taken into account for the wideband systems deployed in the
E-band. Next, a new multi-input multi-output (MIMO) transceiver design, termed
continuous aperture phased (CAP)-MIMO, is presented. Simulations show that
CAP-MIMO enables E-band systems to achieve fiber-optic like throughputs.
Finally, it is argued that full-duplex relaying can be used to greatly enhance
the coverage of E-band systems without sacrificing throughput, thus,
facilitating their application in establishing the backhaul of heterogeneous
networks.Comment: 16 pages, 6 Figures, Journal paper. IEEE Communication Magazine 201
Hybrid Transceiver Optimization for Multi-Hop Communications
Multi-hop communication with the aid of large-scale antenna arrays will play
a vital role in future emergence communication systems. In this paper, we
investigate amplify-and-forward based and multiple-input multiple-output
assisted multi-hop communication, in which all nodes employ hybrid
transceivers. Moreover, channel errors are taken into account in our hybrid
transceiver design. Based on the matrix-monotonic optimization framework, the
optimal structures of the robust hybrid transceivers are derived. By utilizing
these optimal structures, the optimizations of analog transceivers and digital
transceivers can be separated without loss of optimality. This fact greatly
simplifies the joint optimization of analog and digital transceivers. Since the
optimization of analog transceivers under unit-modulus constraints is
non-convex, a projection type algorithm is proposed for analog transceiver
optimization to overcome this difficulty. Based on the derived analog
transceivers, the optimal digital transceivers can then be derived using
matrix-monotonic optimization. Numeral results obtained demonstrate the
performance advantages of the proposed hybrid transceiver designs over other
existing solutions.Comment: 32 pages, 6 figures. This manuscript has been submitted to IEEE
Journal on Selected Areas in Communications (special issue on Multiple
Antenna Technologies for Beyond 5G
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
Rate Balancing in Full-Duplex MIMO Two-Way Relay Networks
Maximizing the minimum rate for a full-duplex multiple-input multiple-output
(MIMO) wireless network encompassing two sources and a two-way (TW) relay
operating in a two hop manner is investigated. To improve the overall
performance, using a zero-forcing approach at the relay to suppress the
residual self-interference arising from full-duplex (FD) operation, the
underlying max-min problem is cast as an optimization problem which is
non-convex. To circumvent this issue, semidefinite relaxation technique is
employed, leading to upper and lower bound solutions for the optimization
problem. Numerical results verify that the upper and lower bound solutions
closely follow each other, showing that the proposed approach results in a
close-to-optimal solution. In addition, the impact of residual
self-interference upon the overall performance of the network in terms of the
minimum rate is illustrated by numerical results, and for low residual
self-interference scenarios the superiority of the proposed method compared to
an analogous half-duplex (HD) counterpart is shown
- …