Massive MIMO 시스템을 위한 채널 추정 및 피드백 기법

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2017. 2. 이정우.To meet the demand of high throughput in next generation wireless systems, various directions for physical layer evolution are being explored. Massive multiple-input multiple-output (MIMO) systems, characterized by a large number of antennas at the transmitter, are expected to become a key enabler for spectral efficiency improvement. In massive MIMO systems, thanks to the orthogonality between different users' channels, high spectral and energy efficiency can be achieved through simple signal processing techniques. However, to get such advantages, accurate channel state information (CSI) needs to be available, and acquiring CSI in massive MIMO systems is challenging due to the increased channel dimension. In frequency division duplexing (FDD) systems, where CSI at the transmitter is achieved through downlink training and uplink feedback, the overhead for the training and feedback increases proportionally to the number of antennas, and the resource for data transmission becomes scarce in massive MIMO systems. In time division duplexing (TDD) systems, where the channel reciprocity holds and the downlink CSI can be obtained through uplink training, pilot contamination due to correlated pilots becomes a performance bottleneck when the number of antennas increases. In this dissertation, I propose efficient CSI acquisition techniques for various massive MIMO systems. First, I develop a downlink training technique for FDD massive MIMO systems, which estimates the downlink channel with small overhead. To this end, compressed sensing tools are utilized, and the training overhead can be highly reduced by exploiting the previous channel information. Next, a limited feedback scheme is developed for FDD massive MIMO systems. The proposed scheme reduces the feedback overhead using a dimension reduction technique that exploits spatial and temporal correlation of the channel. Lastly, I analyze the effect of pilot contamination, which has been regarded as a performance bottleneck in multi-cell massive MIMO systems, and propose two uplink training strategies. An iterative pilot design scheme is developed for small networks, and a scalable training framework is also proposed for networks with many cells.1 Introduction 1 1.1 Massive MIMO 1 1.2 CSI Acquisition in Massive MIMO Systems 3 1.3 Contributions and Organization 6 1.4 Notations 7 2 Compressed Sensing-Aided Downlink Training 9 2.1 Introduction 10 2.2 System Model 13 2.2.1 Channel Model 13 2.2.2 Downlink Channel Estimation 16 2.3 CS-Aided Channel Training 19 2.3.1 Training Sequence Design 20 2.3.2 Channel Estimation 21 2.3.3 Estimation Error 23 2.4 Discussions 26 2.4.1 Design of Measurement Matrix 26 2.4.2 Extension to MIMO Systems 27 2.4.3 Comparison to CS with Partial Support Information 28 2.5 Simulation Results 29 2.6 Conclusion 37 3 Projection-Based Differential Feedback 39 3.1 Introduction 40 3.2 System Model 44 3.2.1 Multi-User Beamforming with Limited Feedback 45 3.2.2 Massive MIMO Channel 47 3.3 Projection-Based Differential Feedback 48 3.3.1 Projection-Based Differential Feedback Framework 48 3.3.2 Projection for PBDF Framework 51 3.3.3 Efficient Algorithm 57 3.4 Discussions 58 3.4.1 Projection with Imperfect CSIR 58 3.4.2 Acquisition of Channel Statistics 61 3.5 Simulation Results 62 3.6 Conclusion 69 4 Mitigating Pilot Contamination via Pilot Design 71 4.1 Introduction 72 4.2 System Model 73 4.2.1 Multi-cell Massive MIMO Systems 74 4.2.2 Uplink Channel Training 75 4.2.3 Data Transmission 77 4.3 Iterative Pilot Design Algorithm 78 4.3.1 Algorithm 79 4.3.2 Proof of Convergence 81 4.4 Generalized Pilot Reuse 81 4.4.1 Concept of Pilot Reuse Schemes 81 4.4.2 Pilot Design based on Grassmannian Subspace Packing 82 4.5 Simulation Results 85 4.5.1 Iterative Pilot Design 85 4.5.2 Generalized Pilot Reuse 87 4.6 Conclusion 89 5 Conclusion 91 5.1 Summary 91 5.2 Future Directions 93 Bibliography 96 Abstract (In Korean) 109Docto

A Generalized Framework on Beamformer Design and CSI Acquisition for Single-Carrier Massive MIMO Systems in Millimeter Wave Channels

In this paper, we establish a general framework on the reduced dimensional channel state information (CSI) estimation and pre-beamformer design for frequency-selective massive multiple-input multiple-output MIMO systems employing single-carrier (SC) modulation in time division duplex (TDD) mode by exploiting the joint angle-delay domain channel sparsity in millimeter (mm) wave frequencies. First, based on a generic subspace projection taking the joint angle-delay power profile and user-grouping into account, the reduced rank minimum mean square error (RR-MMSE) instantaneous CSI estimator is derived for spatially correlated wideband MIMO channels. Second, the statistical pre-beamformer design is considered for frequency-selective SC massive MIMO channels. We examine the dimension reduction problem and subspace (beamspace) construction on which the RR-MMSE estimation can be realized as accurately as possible. Finally, a spatio-temporal domain correlator type reduced rank channel estimator, as an approximation of the RR-MMSE estimate, is obtained by carrying out least square (LS) estimation in a proper reduced dimensional beamspace. It is observed that the proposed techniques show remarkable robustness to the pilot interference (or contamination) with a significant reduction in pilot overhead

Beamspace Aware Adaptive Channel Estimation for Single-Carrier Time-varying Massive MIMO Channels

In this paper, the problem of sequential beam construction and adaptive channel estimation based on reduced rank (RR) Kalman filtering for frequency-selective massive multiple-input multiple-output (MIMO) systems employing single-carrier (SC) in time division duplex (TDD) mode are considered. In two-stage beamforming, a new algorithm for statistical pre-beamformer design is proposed for spatially correlated time-varying wideband MIMO channels under the assumption that the channel is a stationary Gauss-Markov random process. The proposed algorithm yields a nearly optimal pre-beamformer whose beam pattern is designed sequentially with low complexity by taking the user-grouping into account, and exploiting the properties of Kalman filtering and associated prediction error covariance matrices. The resulting design, based on the second order statistical properties of the channel, generates beamspace on which the RR Kalman estimator can be realized as accurately as possible. It is observed that the adaptive channel estimation technique together with the proposed sequential beamspace construction shows remarkable robustness to the pilot interference. This comes with significant reduction in both pilot overhead and dimension of the pre-beamformer lowering both hardware complexity and power consumption.Comment: 7 pages, 3 figures, accepted by IEEE ICC 2017 Wireless Communications Symposiu