1,511 research outputs found
Device-to-Device Communication and Multihop Transmission for Future Cellular Networks
The next generation wireless networks i.e. 5G aim to provide multi-Gbps data traffic, in order to satisfy the increasing demand for high-definition video, among other high data rate services, as well as the exponential growth in mobile subscribers. To achieve this dramatic increase in data rates, current research is focused on improving the capacity of current 4G network standards, based on Long Term Evolution (LTE), before radical changes are exploited which could include acquiring additional/new spectrum. The LTE network has a reuse factor of one; hence neighbouring cells/sectors use the same spectrum, therefore making the cell edge users vulnerable to inter-cell interference. In addition, wireless transmission is commonly hindered by fading and pathloss.
In this direction, this thesis focuses on improving the performance of cell edge users in LTE and LTE-Advanced (LTE-A) networks by initially implementing a new Coordinated Multi-Point (CoMP) algorithm to mitigate cell edge user interference. Subsequently Device-to-Device (D2D) communication is investigated as the enabling technology for maximising Resource Block (RB) utilisation in current 4G and emerging 5G networks. It is demonstrated that the application, as an extension to the above, of novel power control algorithms, to reduce the required D2D TX power, and multihop transmission for relaying D2D traffic, can further enhance network performance. To be able to develop the aforementioned technologies and evaluate the performance of new algorithms in emerging network scenarios, a beyond-the-state-of-the-art LTE system-level simulator (SLS) was implemented. The new simulator includes Multiple-Input Multiple-Output (MIMO) antenna functionalities, comprehensive channel models (such as Wireless World initiative New Radio II i.e. WINNER II) and adaptive modulation and coding schemes to accurately emulate the LTE and LTE-A network standards. Additionally, a novel interference modelling scheme using the ‘wrap around’ technique was proposed and implemented that maintained the topology of flat surfaced maps, allowing for use with cell planning tools while obtaining accurate and timely results in the SLS compared to the few existing platforms.
For the proposed CoMP algorithm, the adaptive beamforming technique was employed to reduce interference on the cell edge UEs by applying Coordinated Scheduling (CoSH) between cooperating cells. Simulation results show up to 2-fold improvement in terms of throughput, and also shows SINR gain for the cell edge UEs in the cooperating cells. Furthermore, D2D communication underlaying the LTE network (and future generation of wireless networks) was investigated. The technology exploits the proximity of users in a network to achieve higher data rates with maximum RB utilisation (as the technology reuses the cellular RB simultaneously), while taking some load off the Evolved Node B (eNB) i.e. by direct communication between User Equipment (UE). Simulation results show that the proximity and transmission power of D2D transmission yields high performance gains for a D2D receiver, which was demonstrated to be better than that of cellular UEs with better channel conditions or in close proximity to the eNB in the network. The impact of interference from the simultaneous transmission however impedes the achievable data rates of cellular UEs in the network, especially at the cell edge. Thus, a power control algorithm was proposed to mitigate the impact of interference in the hybrid network (network consisting of both cellular and D2D UEs). It was implemented by setting a minimum SINR threshold so that the cellular UEs achieve a minimum performance, and equally a maximum SINR threshold to establish fairness for the D2D transmission as well. Simulation results show
an increase in the cell edge throughput and notable improvement in the overall SINR distribution of UEs in the hybrid network. Additionally, multihop transmission for D2D UEs was investigated in the hybrid network: traditionally, the scheme is implemented to relay cellular traffic in a homogenous network. Contrary to most current studies where D2D UEs are employed to relay cellular traffic, the use of idle nodes to relay D2D traffic was implemented uniquely in this thesis. Simulation results show improvement in D2D receiver throughput with multihop transmission, which was significantly better than that of the same UEs performance with equivalent distance between the D2D pair when using single hop transmission
TD-SCDMA Relay Networks
PhDWhen this research was started, TD-SCDMA (Time Division Synchronous Code
Division Multiple Access) was still in the research/ development phase, but
now, at the time of writing this thesis, it is in commercial use in 10 large cities in
China including Beijing and Shang Hai. In all of these cities HSDPA is enabled.
The roll-out of the commercial deployment is progressing fast with installations
in another 28 cities being underway now.
However, during the pre-commercial TD-SCDM trail in China, which started
from year 2006, some interference problems have been noticed especially in the
network planning and initialization phases. Interference is always an issue in
any network and the goal of the work reported in this thesis is to improve
network coverage and capacity in the presence of interference.
Based on an analysis of TD-SCDMA issues and how network interference arises,
this thesis proposes two enhancements to the network in addition to the
standard N-frequency technique. These are (i) the introduction of the concentric
circle cell concept and (ii) the addition of a relay network that makes use of
other users at the cell boundary. This overall approach not only optimizes the
resilience to interference but increases the network coverage without adding
more Node Bs.
Based on the cell planning parameters from the research, TD-SCDMA HSDPA
services in dense urban area and non-HSDPA services in rural areas were
simulated to investigate the network performance impact after introducing the
relay network into a TD-SCDMA network.
The results for HSDPA applications show significant improvement in the TDSCDMA
relay network both for network capacity and network interference
aspects compared to standard TD-SCDMA networks. The results for non-
HSDPA service show that although the network capacity has not changed after
adding in the relay network (due to the code limitation in TD-SCDMA), the
TD-SCDMA relay network has better interference performance and greater
coverage
Recommended from our members
Performance Modelling and Analysis of a New CoMP-based Handover Scheme for Next Generation Wireless Networks. Performance Modelling and Analysis for the Design and Development of a New Handover Scheme for Cell Edge Users in Next Generation Wireless Networks (NGWNs) Based on the Coordinated Multi-Point (CoMP) Joint Transmission (JT) Technique
Inter-Cell Interference (ICI) will be one of main problems for degrading the performance of future wireless networks at cell edge. This adverse situation will become worst in the presence of dense deployment of micro and macro cells. In this context, the Coordinated Multi-Point (CoMP) technique was introduced to mitigate ICI in Next Generation Wireless Networks (NGWN) and increase their network performance at cell edge. Even though the CoMP technique provides satisfactory solutions of various problems at cell edge, nevertheless existing CoMP handover schemes do not prevent unnecessary handover initialisation decisions and never discuss the drawbacks of CoMP handover technique such as excessive feedback and resource sharing among UEs. In this research, new CoMP-based handover schemes are proposed in order to minimise unnecessary handover decisions at cell edge and determine solution of drawbacks of CoMP technique in conjunction with signal measurements such as Reference Signal Received Power (RSRP) and Received Signal Received Quality (RSRQ). A combination of calculations of RSRP and RSRQ facilitate a credible decision making process of CoMP mode and handover mode at cell edge. Typical numerical experiments indicate that by triggering the CoMP mode along with solutions of drawbacks, the overall network performance is constantly increase as the number of unnecessary handovers is progressively reduced
Harmonized Cellular and Distributed Massive MIMO: Load Balancing and Scheduling
Multi-tier networks with large-array base stations (BSs) that are able to
operate in the "massive MIMO" regime are envisioned to play a key role in
meeting the exploding wireless traffic demands. Operated over small cells with
reciprocity-based training, massive MIMO promises large spectral efficiencies
per unit area with low overheads. Also, near-optimal user-BS association and
resource allocation are possible in cellular massive MIMO HetNets using simple
admission control mechanisms and rudimentary BS schedulers, since scheduled
user rates can be predicted a priori with massive MIMO.
Reciprocity-based training naturally enables coordinated multi-point
transmission (CoMP), as each uplink pilot inherently trains antenna arrays at
all nearby BSs. In this paper we consider a distributed-MIMO form of CoMP,
which improves cell-edge performance without requiring channel state
information exchanges among cooperating BSs. We present methods for harmonized
operation of distributed and cellular massive MIMO in the downlink that
optimize resource allocation at a coarser time scale across the network. We
also present scheduling policies at the resource block level which target
approaching the optimal allocations. Simulations reveal that the proposed
methods can significantly outperform the network-optimized cellular-only
massive MIMO operation (i.e., operation without CoMP), especially at the cell
edge
- …