Obstacle Detection Based on Fusion Between Stereovision and 2D Laser Scanner

International audienceObstacle detection is an essential task for mobile robots. This subject has been investigated for many years by researchers and a lot of obstacle detection systems have been proposed so far. Yet designing an accurate and totally robust and reliable system remains a challenging task, above all in outdoor environments. Thus, the purpose of this chapter is to present new techniques and tools to design an accurate, robust and reliable obstacle detection system in outdoor environments based on a minimal number of sensors. So far, experiments and assessments of already developed systems show that using a single sensor is not enough to meet the requirements: at least two complementary sensors are needed. In this chapter a stereovision sensor and a 2D laser scanner are considered

Small UAS Detect and Avoid Requirements Necessary for Limited Beyond Visual Line of Sight (BVLOS) Operations

Potential small Unmanned Aircraft Systems (sUAS) beyond visual line of sight (BVLOS) operational scenarios/use cases and Detect And Avoid (DAA) approaches were collected through a number of industry wide data calls. Every 333 Exemption holder was solicited for this same information. Summary information from more than 5,000 exemption holders is documented, and the information received had varied level of detail but has given relevant experiential information to generalize use cases. A plan was developed and testing completed to assess Radio Line Of Sight (RLOS), a potential key limiting factors for safe BVLOS ops. Details of the equipment used, flight test area, test payload, and fixtures for testing at different altitudes is presented and the resulting comparison of a simplified mathematical model, an online modeling tool, and flight data are provided. An Operational Framework that defines the environment, conditions, constraints, and limitations under which the recommended requirements will enable sUAS operations BVLOS is presented. The framework includes strategies that can build upon Federal Aviation Administration (FAA) and industry actions that should result in an increase in BVLOS flights in the near term. Evaluating approaches to sUAS DAA was accomplished through five subtasks: literature review of pilot and ground observer see and avoid performance, survey of DAA criteria and recommended baseline performance, survey of existing/developing DAA technologies and performance, assessment of risks of selected DAA approaches, and flight testing. Pilot and ground observer see and avoid performance were evaluated through a literature review. Development of DAA criteria—the emphasis here being well clear— was accomplished through working with the Science And Research Panel (SARP) and through simulations of manned and unmanned aircraft interactions. Information regarding sUAS DAA approaches was collected through a literature review, requests for information, and direct interactions. These were analyzed through delineation of system type and definition of metrics and metric values. Risks associated with sUAS DAA systems were assessed by focusing on the Safety Risk Management (SRM) pillar of the SMS (Safety Management System) process. This effort (1) identified hazards related to the operation of sUAS in BVLOS, (2) offered a preliminary risk assessment considering existing controls, and (3) recommended additional controls and mitigations to further reduce risk to the lowest practical level. Finally, flight tests were conducted to collect preliminary data regarding well clear and DAA system hazards

Removing Orbital Debris with Lasers

Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collisional cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoule lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.Comment: 37 pages, 15 figures, in preparation for submission to Advances in Space Researc

The International Linear Collider

In this article, we describe the key features of the recently completed technical design for the International Linear Collider (ILC), a 200-500 GeV linear electron-positron collider (expandable to 1 TeV) that is based on 1.3 GHz superconducting radio-frequency (SCRF) technology. The machine parameters and detector characteristics have been chosen to complement the Large Hadron Collider physics, including the discovery of the Higgs boson, and to further exploit this new particle physics energy frontier with a precision instrument. The linear collider design is the result of nearly twenty years of R&D, resulting in a mature conceptual design for the ILC project that reflects an international consensus. We summarize the physics goals and capability of the ILC, the enabling R&D and resulting accelerator design, as well as the concepts for two complementary detectors. The ILC is technically ready to be proposed and built as a next generation lepton collider, perhaps to be built in stages beginning as a Higgs factory.Comment: 41 page

Galileo and EGNOS as an asset for UTM safety and security

GAUSS (Galileo-EGNOS as an Asset for UTM Safety and Security) is a H2020 project1 that aims at designing and developing high performance positioning systems for drones within the U-Space framework focusing on UAS (Unmanned Aircraft System) VLL (Very Low Level) operations. The key element within GAUSS is the integration and exploitation of Galileo and EGNOS exceptional features in terms of accuracy, integrity and security, which will be key assets for the safety of current and future drone operations. More concretely, high accuracy, authentication, precise timing (among others) are key GNSS (Global Navigation Satellite System) enablers of future integrated drone operations under UTM (UAS Traffic Management) operations, which in Europe will be deployed under U-Space [1]. The U-Space concept helps control, manage and integrate all UAS in the VLL airspace to ensure the security and efficiency of UAS operations. GAUSS will enable not only safe, timely and efficient operations but also coordination among a higher number of RPAS (Remotely Piloted Aircraft System) in the air with the appropriate levels of security, as it will improve anti-jamming and anti-spoofing capabilities through a multi-frequency and multi-constellation approach and Galileo authentication operations. The GAUSS system will be validated with two field trials in two different UTM real scenarios (in-land and sea) with the operation of a minimum of four UTM coordinated UAS from different types (fixed and rotary wing), manoeuvrability and EASA (European Aviation Safety Agency) operational categories. The outcome of the project will consist of Galileo-EGNOS based technological solutions to enhance safety and security levels in both, current UAS and future UTM operations. Increased levels of efficiency, reliability, safety, and security in UAS operations are key enabling features to foster the EU UAS regulation, market development and full acceptance by the society.Peer ReviewedPostprint (author's final draft