634 research outputs found
Towards dynamically consistent real-time gait pattern generation for full-size humanoid robots
We propose a two-stage gait pattern generation scheme for the full-scale humanoid robots, that considers the dynamics of the system throughout the process. The fist stage is responsible for generating semi-dynamically consistent step position and step time information, while the second stage incorporated with multi-body dynamics system is responsible for generation of gait pattern that is feasible and stable on the full-scale multi-degree-of-freedom humanoid robot. The approach allows for very rapid gait pattern regeneration during the swing phase of motion and includes information about present dynamic state when regenerating the new pattern. The paper contains description of a developed method, as well as experimental results proving its effectiveness
Simulation and Framework for the Humanoid Robot TigerBot
Walking humanoid robotics is a developing field. Different humanoid robots allow for different kinds of testing. TigerBot is a new full-scale humanoid robot with seven degrees-of-freedom legs and with its specifications, it can serve as a platform for humanoid robotics research. Currently TigerBot has encoders set up on each joint, allowing for position control, and its sensors and joints connect to Teensy microcontrollers and the ODroid XU4 single-board computer central control unit. The components’ communication system used the Robot Operating System (ROS). This allows the user to control TigerBot with ROS. It’s important to have a simulation setup so a user can test TigerBot’s capabilities on a model before using the real robot. A working walking gait in the simulation serves as a test of the simulator, proves TigerBot’s capability to walk, and opens further development on other walking gaits. A model of TigerBot was set up using the simulator Gazebo, which allowed testing different walking gaits with TigerBot. The gaits were generated by following the linear inverse pendulum model and the basic zero-moment point (ZMP) concept. The gaits consisted of center of mass trajectories converted to joint angles through inverse kinematics. In simulation while the robot follows the predetermined joint angles, a proportional-integral controller keeps the model upright by modifying the flex joint angle of the ankles. The real robot can also run the gaits while suspended in the air. The model has shown the walking gait based off the ZMP concept to be stable, if slow, and the actual robot has been shown to air walk following the gait. The simulation and the framework on the robot can be used to continue work with this walking gait or they can be expanded on for different methods and applications such as navigation, computer vision, and walking on uneven terrain with disturbances
On Time Optimization of Centroidal Momentum Dynamics
Recently, the centroidal momentum dynamics has received substantial attention
to plan dynamically consistent motions for robots with arms and legs in
multi-contact scenarios. However, it is also non convex which renders any
optimization approach difficult and timing is usually kept fixed in most
trajectory optimization techniques to not introduce additional non convexities
to the problem. But this can limit the versatility of the algorithms. In our
previous work, we proposed a convex relaxation of the problem that allowed to
efficiently compute momentum trajectories and contact forces. However, our
approach could not minimize a desired angular momentum objective which
seriously limited its applicability. Noticing that the non-convexity introduced
by the time variables is of similar nature as the centroidal dynamics one, we
propose two convex relaxations to the problem based on trust regions and soft
constraints. The resulting approaches can compute time-optimized dynamically
consistent trajectories sufficiently fast to make the approach realtime
capable. The performance of the algorithm is demonstrated in several
multi-contact scenarios for a humanoid robot. In particular, we show that the
proposed convex relaxation of the original problem finds solutions that are
consistent with the original non-convex problem and illustrate how timing
optimization allows to find motion plans that would be difficult to plan with
fixed timing.Comment: 7 pages, 4 figures, ICRA 201
Push recovery with stepping strategy based on time-projection control
In this paper, we present a simple control framework for on-line push
recovery with dynamic stepping properties. Due to relatively heavy legs in our
robot, we need to take swing dynamics into account and thus use a linear model
called 3LP which is composed of three pendulums to simulate swing and torso
dynamics. Based on 3LP equations, we formulate discrete LQR controllers and use
a particular time-projection method to adjust the next footstep location
on-line during the motion continuously. This adjustment, which is found based
on both pelvis and swing foot tracking errors, naturally takes the swing
dynamics into account. Suggested adjustments are added to the Cartesian 3LP
gaits and converted to joint-space trajectories through inverse kinematics.
Fixed and adaptive foot lift strategies also ensure enough ground clearance in
perturbed walking conditions. The proposed structure is robust, yet uses very
simple state estimation and basic position tracking. We rely on the physical
series elastic actuators to absorb impacts while introducing simple laws to
compensate their tracking bias. Extensive experiments demonstrate the
functionality of different control blocks and prove the effectiveness of
time-projection in extreme push recovery scenarios. We also show self-produced
and emergent walking gaits when the robot is subject to continuous dragging
forces. These gaits feature dynamic walking robustness due to relatively soft
springs in the ankles and avoiding any Zero Moment Point (ZMP) control in our
proposed architecture.Comment: 20 pages journal pape
Dynamic Walking: Toward Agile and Efficient Bipedal Robots
Dynamic walking on bipedal robots has evolved from an idea in science fiction to a practical reality. This is due to continued progress in three key areas: a mathematical understanding of locomotion, the computational ability to encode this mathematics through optimization, and the hardware capable of realizing this understanding in practice. In this context, this review article outlines the end-to-end process of methods which have proven effective in the literature for achieving dynamic walking on bipedal robots. We begin by introducing mathematical models of locomotion, from reduced order models that capture essential walking behaviors to hybrid dynamical systems that encode the full order continuous dynamics along with discrete footstrike dynamics. These models form the basis for gait generation via (nonlinear) optimization problems. Finally, models and their generated gaits merge in the context of real-time control, wherein walking behaviors are translated to hardware. The concepts presented are illustrated throughout in simulation, and experimental instantiation on multiple walking platforms are highlighted to demonstrate the ability to realize dynamic walking on bipedal robots that is agile and efficient
Development of a Locomotion and Balancing Strategy for Humanoid Robots
The locomotion ability and high mobility are the most distinguished features of humanoid robots. Due to the non-linear dynamics of walking, developing and controlling the locomotion of humanoid robots is a challenging task. In this thesis, we study and develop a walking engine for the humanoid robot, NAO, which is the official robotic platform used in the RoboCup Spl. Aldebaran Robotics, the manufacturing company of NAO provides a walking module that has disadvantages, such as being a black box that does not provide control of the gait as well as the robot walk with a bent knee. The latter disadvantage, makes the gait unnatural, energy inefficient and exert large amounts of torque to the knee joint. Thus creating a walking engine that produces a quality and natural gait is essential for humanoid robots in general and is a factor for succeeding in RoboCup competition.
Humanoids robots are required to walk fast to be practical for various life tasks. However, its complex structure makes it prone to falling during fast locomotion. On the same hand, the robots are expected to work in constantly changing environments alongside humans and robots, which increase the chance of collisions. Several human-inspired recovery strategies have been studied and adopted to humanoid robots in order to face unexpected and avoidable perturbations. These strategies include hip, ankle, and stepping, however, the use of the arms as a recovery strategy did not enjoy as much attention. The arms can be employed in different motions for fall prevention. The arm rotation strategy can be employed to control the angular momentum of the body and help to regain balance. In this master\u27s thesis, I developed a detailed study of different ways in which the arms can be used to enhance the balance recovery of the NAO humanoid robot while stationary and during locomotion. I model the robot as a linear inverted pendulum plus a flywheel to account for the angular momentum change at the CoM. I considered the role of the arms in changing the body\u27s moment of inertia which help to prevent the robot from falling or to decrease the falling impact. I propose a control algorithm that integrates the arm rotation strategy with the on-board sensors of the NAO. Additionally, I present a simple method to control the amount of recovery from rotating the arms. I also discuss the limitation of the strategy and how it can have a negative impact if it was misused. I present simulations to evaluate the approach in keeping the robot stable against various disturbance sources. The results show the success of the approach in keeping the NAO stable against various perturbations. Finally,I adopt the arm rotation to stabilize the ball kick, which is a common reason for falling in the soccer humanoid RoboCup competitions
Humanoid Robot Soccer Locomotion and Kick Dynamics: Open Loop Walking, Kicking and Morphing into Special Motions on the Nao Robot
Striker speed and accuracy in the RoboCup (SPL) international robot soccer league is becoming
increasingly important as the level of play rises. Competition around the ball is now decided in a
matter of seconds. Therefore, eliminating any wasted actions or motions is crucial when attempting to
kick the ball.
It is common to see a discontinuity between walking and kicking where a robot will return to an
initial pose in preparation for the kick action. In this thesis we explore the removal of this behaviour
by developing a transition gait that morphs the walk directly into the kick back swing pose. The
solution presented here is targeted towards the use of the Aldebaran walk for the Nao robot.
The solution we develop involves the design of a central pattern generator to allow for controlled
steps with realtime accuracy, and a phase locked loop method to synchronise with the Aldebaran walk
so that precise step length control can be activated when required. An open loop trajectory mapping
approach is taken to the walk that is stabilized statically through the use of a phase varying joint
holding torque technique. We also examine the basic princples of open loop walking, focussing on the
commonly overlooked frontal plane motion.
The act of kicking itself is explored both analytically and empirically, and solutions are provided
that are versatile and powerful. Included as an appendix, the broader matter of striker behaviour
(process of goal scoring) is reviewed and we present a velocity control algorithm that is very accurate
and efficient in terms of speed of execution
- …