Electricity from photovoltaic solar cells: Flat-Plate Solar Array Project final report. Volume VI: Engineering sciences and reliability

The Flat-Plate Solar Array (FSA) Project, funded by the U.S. Government and managed by the Jet Propulsion Laboratory, was formed in 1975 to develop the module/array technology needed to attain widespread terrestrial use of photovoltaics by 1985. To accomplish this, the FSA Project established and managed an Industry, University, and Federal Government Team to perform the needed research and development. This volume of the series of final reports documenting the FSA Project deals with the Project's activities directed at developing the engineering technology base required to achieve modules that meet the functional, safety and reliability requirements of large-scale terrestrial photovoltaic systems applications. These activities included: (1) development of functional, safety, and reliability requirements for such applications; (2) development of the engineering analytical approaches, test techniques, and design solutions required to meet the requirements; (3) synthesis and procurement of candidate designs for test and evaluation; and (4) performance of extensive testing, evaluation, and failure analysis to define design shortfalls and, thus, areas requiring additional research and development. During the life of the FSA Project, these activities were known by and included a variety of evolving organizational titles: Design and Test, Large-Scale Procurements, Engineering, Engineering Sciences, Operations, Module Performance and Failure Analysis, and at the end of the Project, Reliability and Engineering Sciences. This volume provides both a summary of the approach and technical outcome of these activities and provides a complete Bibliography (Appendix A) of the published documentation covering the detailed accomplishments and technologies developed

Design and analysis of a UHF transmission line coupler for telemetry and power harvesting in a passive sensor system

The intra-coaxial transmission line coupler TXC is a four port device designed to harvest power from a host coaxial transmission line and to provide telemetry for remote sensing applications via the same host transmission line. Seven different TXC structures were designed and fabricated to study the effects of varying specific geometric features on the electrical characteristics of the TXC. Each TXC structure was tested using a RF vector network analyzer and analyzed using a commercially available finite-element numerical simulator. Two main observations resulted from the study: 1) the resonant frequency depends mainly on the value of the tuning capacitor and the loop inductance of the TXC, and 2) the electrical characteristics are relatively insensitive to variations in all geometric features except the TXC loop surface area and, to a lesser extent, the separation distance between the coax center conductor and the TXC loop. It was found that the output impedance, Q-factor, voltage transfer characteristic, and power transfer characteristic computed from simulations were systematically greater than those computed from experiment. It was shown that by using experimental results to fit the simulations, a much better agreement could be obtained between experimental and simulation results

Via transition modeling and charge replenishment of the power delivery network in multilayer PCBs

In the first article of this thesis, the charge delivery in the power distribution network for printed circuit board has been analyzed in the time-domain. Performing all the simulations and analyzing the PDN physics and modeling, I contributed to a better understanding of the time-domain decoupling mechanism. The second paper studies the noise coupling sing a segmentation approach combined with a via-to-antipad capacitance model and a plane-pair cavity model. Building equivalent circuit models as well as analyzing design strategies, I contributed to a new approach for the PDN analysis in multilayer PCBs. The third article discusses how to estimate the amount of current needed for large ICs and how to evaluate the amount of noise voltage due to this current draw. After accurate discussion of the design strategies, I modeled and simulated the free evolution of a charged PCB with and without decoupling capacitors. The depletion of charges stored between the power buses in time and frequency-domain has been investigated as a function of the plane thickness, SMT decoupling closeness in the fourth paper. With my contribution, the time and frequency-domain in the PDN have been related using circuit approach. In the fifth paper, I analyzed a 26-layer printed circuit board performing milling, measurements and building circuit models. It is the first time that the segmentation approach has been used for differential geometry. In addition, Debye materials have been implemented in the cavity model --Abstract, page iv

Embedded dynamic programming networks for networks-on-chip

PhD ThesisRelentless technology downscaling and recent technological advancements in three dimensional integrated circuit (3D-IC) provide a promising prospect to realize heterogeneous system-on-chip (SoC) and homogeneous chip multiprocessor (CMP) based on the networks-onchip (NoCs) paradigm with augmented scalability, modularity and performance. In many cases in such systems, scheduling and managing communication resources are the major design and implementation challenges instead of the computing resources. Past research efforts were mainly focused on complex design-time or simple heuristic run-time approaches to deal with the on-chip network resource management with only local or partial information about the network. This could yield poor communication resource utilizations and amortize the benefits of the emerging technologies and design methods. Thus, the provision for efficient run-time resource management in large-scale on-chip systems becomes critical. This thesis proposes a design methodology for a novel run-time resource management infrastructure that can be realized efficiently using a distributed architecture, which closely couples with the distributed NoC infrastructure. The proposed infrastructure exploits the global information and status of the network to optimize and manage the on-chip communication resources at run-time. There are four major contributions in this thesis. First, it presents a novel deadlock detection method that utilizes run-time transitive closure (TC) computation to discover the existence of deadlock-equivalence sets, which imply loops of requests in NoCs. This detection scheme, TC-network, guarantees the discovery of all true-deadlocks without false alarms in contrast to state-of-the-art approximation and heuristic approaches. Second, it investigates the advantages of implementing future on-chip systems using three dimensional (3D) integration and presents the design, fabrication and testing results of a TC-network implemented in a fully stacked three-layer 3D architecture using a through-silicon via (TSV) complementary metal-oxide semiconductor (CMOS) technology. Testing results demonstrate the effectiveness of such a TC-network for deadlock detection with minimal computational delay in a large-scale network. Third, it introduces an adaptive strategy to effectively diffuse heat throughout the three dimensional network-on-chip (3D-NoC) geometry. This strategy employs a dynamic programming technique to select and optimize the direction of data manoeuvre in NoC. It leads to a tool, which is based on the accurate HotSpot thermal model and SystemC cycle accurate model, to simulate the thermal system and evaluate the proposed approach. Fourth, it presents a new dynamic programming-based run-time thermal management (DPRTM) system, including reactive and proactive schemes, to effectively diffuse heat throughout NoC-based CMPs by routing packets through the coolest paths, when the temperature does not exceed chip’s thermal limit. When the thermal limit is exceeded, throttling is employed to mitigate heat in the chip and DPRTM changes its course to avoid throttled paths and to minimize the impact of throttling on chip performance. This thesis enables a new avenue to explore a novel run-time resource management infrastructure for NoCs, in which new methodologies and concepts are proposed to enhance the on-chip networks for future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)

Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP.Postprint (published version