170 research outputs found

    Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks

    Full text link
    Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the usage of the 60 GHz unlicensed band for wireless local area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved to support bandwidth-intensive multimedia applications. Exhaustive search along with beamforming (BF) is usually used to overcome 60 GHz channel propagation loss and accomplish data transmissions in such mmw WLANs. Because of its short range transmission with a high susceptibility to path blocking, multiple number of mmw access points (APs) should be used to fully cover a typical target environment for future high capacity multi-Gbps WLANs. Therefore, coordination among mmw APs is highly needed to overcome packet collisions resulting from un-coordinated exhaustive search BF and to increase the total capacity of mmw WLANs. In this paper, we firstly give the current status of mmw WLANs with our developed WiGig AP prototype. Then, we highlight the great need for coordinated transmissions among mmw APs as a key enabler for future high capacity mmw WLANs. Two different types of coordinated mmw WLAN architecture are introduced. One is the distributed antenna type architecture to realize centralized coordination, while the other is an autonomous coordination with the assistance of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet) architectures are also introduced to efficiently extend the coordinated mmw WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper

    Belaidžio ryšio tinklų terpės prieigos valdymo tyrimas

    Get PDF
    Over the years, consumer requirements for Quality of Service (QoS) has been growing exponentially. Recently, the ratification process of newly IEEE 802.11ad amendment to IEEE 802.11 was finished. The IEEE 802.11ad is the newly con-sumer wireless communication approach, which will gain high spot on the 5G evolution. Major players in wireless market, such as Qualcomm already are inte-grating solutions from unlicensed band, like IEEE 802.11ac, IEEE 802.11ad into their architecture of LTE PRO (the next evolutionary step for 5G networking) (Qualcomm 2013; Parker et al. 2015). As the demand is growing both in enter-prise wireless networking and home consumer markets. Consumers started to no-tice the performance degradation due to overcrowded unlicensed bands. The un-licensed bands such as 2.4 GHz, 5 GHz are widely used for up-to-date IEEE 802.11n/ac technologies with upcoming IEEE 802.11ax. However, overusage of the available frequency leads to severe interference issue and consequences in to-tal system performance degradation, currently existing wireless medium access method can not sustain the increasing intereference and thus wireless needs a new methods of wireless medium access. The main focal point of this dissertation is to improve wireless performance in dense wireless networks. In dissertation both the conceptual and multi-band wireless medium access methods are considered both from theoretical point of view and experimental usage. The introduction chapter presents the investigated problem and it’s objects of research as well as importance of dissertation and it’s scientific novelty in the unlicensed wireless field. Chapter 1 revises used literature. Existing and up-to-date state-of-the-art so-lution are reviewed, evaluated and key point advantages and disadvantages are analyzed. Conclusions are drawn at the end of the chapter. Chapter 2 describes theoretical analysis of wireless medium access protocols and the new wireless medium access method. During analysis theoretical simula-tions are performed. Conclusions are drawn at the end of the chapter. Chapter 3 is focused on the experimental components evaluation for multi-band system, which would be in line with theoretical concept investigations. The experimental results, showed that components of multi-band system can gain sig-nificant performance increase when compared to the existing IEEE 802.11n/ac wireless systems. General conclusions are drawn after analysis of measurement results

    Millimeter Wave Cellular Networks: A MAC Layer Perspective

    Full text link
    The millimeter wave (mmWave) frequency band is seen as a key enabler of multi-gigabit wireless access in future cellular networks. In order to overcome the propagation challenges, mmWave systems use a large number of antenna elements both at the base station and at the user equipment, which lead to high directivity gains, fully-directional communications, and possible noise-limited operations. The fundamental differences between mmWave networks and traditional ones challenge the classical design constraints, objectives, and available degrees of freedom. This paper addresses the implications that highly directional communication has on the design of an efficient medium access control (MAC) layer. The paper discusses key MAC layer issues, such as synchronization, random access, handover, channelization, interference management, scheduling, and association. The paper provides an integrated view on MAC layer issues for cellular networks, identifies new challenges and tradeoffs, and provides novel insights and solution approaches.Comment: 21 pages, 9 figures, 2 tables, to appear in IEEE Transactions on Communication

    A Survey on Multi-AP Coordination Approaches over Emerging WLANs: Future Directions and Open Challenges

    Full text link
    Recent advancements in wireless local area network (WLAN) technology include IEEE 802.11be and 802.11ay, often known as Wi-Fi 7 and WiGig, respectively. The goal of these developments is to provide Extremely High Throughput (EHT) and low latency to meet the demands of future applications like as 8K videos, augmented and virtual reality, the Internet of Things, telesurgery, and other developing technologies. IEEE 802.11be includes new features such as 320 MHz bandwidth, multi-link operation, Multi-user Multi-Input Multi-Output, orthogonal frequency-division multiple access, and Multiple-Access Point (multi-AP) coordination (MAP-Co) to achieve EHT. With the increase in the number of overlapping APs and inter-AP interference, researchers have focused on studying MAP-Co approaches for coordinated transmission in IEEE 802.11be, making MAP-Co a key feature of future WLANs. Moreover, similar issues may arise in EHF bands WLAN, particularly for standards beyond IEEE 802.11ay. This has prompted researchers to investigate the implementation of MAP-Co over future 802.11ay WLANs. Thus, in this article, we provide a comprehensive review of the state-of-the-art MAP-Co features and their shortcomings concerning emerging WLAN. Finally, we discuss several novel future directions and open challenges for MAP-Co.Comment: The reason for the replacement of the previous version of the paper is due to a change in the author's list. As a result, a new version has been created, which serves as the final draft version before acceptance. This updated version contains all the latest changes and improvements made to the pape

    A Detailed Characterization of 60 GHz Wi-Fi (IEEE 802.11ad)

    Get PDF
    The emergence of wireless local area network (WLAN) standards and the global system of mobile communication (GSM) in the early 1990s incited tremendous growth in the demand for wireless connectivity. Iterative technological enhancements to cellular and WLAN improved wireless capacity and created a breadth of new mobile applications. The continued increase in display resolutions and image quality combined with streaming displacing satellite/cable has created unprecedented demands on wireless infrastructure. Data-caps on cellular networks deter over consumption and increasingly shift the growing burden to Wi-Fi networks. The traditional 2.4/5 GHz Wi-Fi bands have become overloaded and the increasing number of wireless devices in the home, public, and workplace create difficult challenges to deliver quality service to large numbers of client stations. In dense urban areas, the wireless medium is subjected to increased interference due to overlapping networks and other devices communicating in the same frequency bands. Improvements to conventional Wi-Fi are approaching their theoretical limits and higher order enhancements require idealized conditions which are seldom attainable in practice. In an effort to supplant to scaling capacity requirements a very high frequency WLAN amendment has been proposed (IEEE 802.11ad). IEEE 802.11ad, also referred to as Wireless Gigabit (WiGig), operates in the globally unlicensed 60 GHz band and offers channel bandwidths nearly 100x as wide as 802.11n. The higher bandwidth facilitates multi-Gbps throughput even with the use of lower complexity modulation coding schemes (MCS). IEEE 802.11ad relies heavily on rate adaptation and high beamforming gain to mitigate interference and fading as signals in the 60 GHz band suffer from higher atmospheric ab- sorption and free space path loss (FSPL). Due to the unique nature of 60 GHz wireless there have been numerous research efforts. Many studies have been directed at simulation and modeling of the 60 GHz channel. However modeling the channel is difficult as real- world environments are highly dynamic with varying link quality and conditions which cannot be accurately predicted by conventional techniques. Some research is focused on medium access control (MAC) enhancements to improve overall capacity by coordinating concurrent links or reducing communication overhead for example. Lastly, there has been a limited amount of real world testing of 802.11ad due to lack of availability of commercial platforms and measurement instrumentation. Some researchers tested early generation devices in certain use cases such as in vehicles for media streaming, in data centers to augment the wired network, or in basic indoor and outdoor environments. This research contains two main components. In the first study, analytical models are applied to estimate line of sight (LOS) 802.11ad performance for realistic antenna param- eters. The second part contains a comprehensive evaluation of performance and reliability of early generation 802.11ad hardware. This characterization emphasizes environmen- tal performance (e.g. conference room, cubical farm, open office), multiple-client testing (multiclient), multiple network interference (spatial re-use), and stability in the presence of station mobility, physical obstructions, and antenna misalignment. In order to evaluate 802.11ad, early generation platforms from technology vendors were used in extensive test suites. The hardware tested included docks for wireless personal area networking (WPAN) applications, client laptop stations, and reference design access points (APs). Finally, a customized proof-of-concept (PoC) platform was engineered which allowed finer control over front end antenna configuration parameters such as: topology, placement and orienta- tion. The PoC also served as a suitable means to identify practical limitations and system design engineering challenges associated with supporting directional multi-Gbps (DMG) communication in the 60 GHz band

    Improving the Performance of Wireless LANs

    Get PDF
    This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids
    corecore