908 research outputs found
An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications
The millimeter wave (mmWave) frequencies offer the potential of orders of
magnitude increases in capacity for next-generation cellular systems. However,
links in mmWave networks are susceptible to blockage and may suffer from rapid
variations in quality. Connectivity to multiple cells - at mmWave and/or
traditional frequencies - is considered essential for robust communication. One
of the challenges in supporting multi-connectivity in mmWaves is the
requirement for the network to track the direction of each link in addition to
its power and timing. To address this challenge, we implement a novel uplink
measurement system that, with the joint help of a local coordinator operating
in the legacy band, guarantees continuous monitoring of the channel propagation
conditions and allows for the design of efficient control plane applications,
including handover, beam tracking and initial access. We show that an
uplink-based multi-connectivity approach enables less consuming, better
performing, faster and more stable cell selection and scheduling decisions with
respect to a traditional downlink-based standalone scheme. Moreover, we argue
that the presented framework guarantees (i) efficient tracking of the user in
the presence of the channel dynamics expected at mmWaves, and (ii) fast
reaction to situations in which the primary propagation path is blocked or not
available.Comment: Submitted for publication in IEEE Transactions on Wireless
Communications (TWC
Multi-layer Utilization of Beamforming in Millimeter Wave MIMO Systems
mmWave frequencies ranging between (30-300GHz) have been considered the perfect solution to the scarcity of bandwidth in the traditional sub-6GHz band and to the ever increasing demand of many emerging applications in today\u27s era. 5G and beyond standards are all considering the mmWave as an essential part of there networks. Beamforming is one of the most important enabling technologies for the mmWave to compensate for the huge propagation lose of these frequencies compared to the sub-6GHz frequencies and to ensure better spatial and spectral utilization of the mmWave channel space. In this work, we tried to develop different techniques to improve the performance of the systems that use mmWave. In the physical layer, we suggested several hybrid beamforming architectures that both are relatively simple and spectrally efficient by achieving fully digital like spectral efficiency (bits/sec/Hz). For the mobility management, we derived the expected degradation that can affect the performance of a special type of beamforming that is called the Random Beamforming (RBF) and optimized the tunable parameters for such systems when working in different environments. Finally, in the networking layer, we first studied the effect of using mmWave frequencies on the routing performance comparing to the performance achieved when using sub-6 GHz frequencies. Then we developed a novel opportunistic routing protocol for Mobile Ad-Hoc Networks (MANET) that uses a modified version of the Random Beamforming (RBF) to achieve better end to end performance and to reduce the overall delay in delivering data from transmitting nodes to the intended receiving nodes. From all these designs and studies, we conclude that mmWave frequencies and their enabling technologies (i.e. Beamforming, massive MIMO, ...etc.) are indeed the future of wireless communicatons in a high demanding world of Internet of Things (IoT), Augmented Reality (AR), Virtual Reality (VR), and self driving cars
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
Beam Alignment for Millimetre Wave Links with Motion Prediction of Autonomous Vehicles
Intelligent Transportation Systems (ITSs) require ultra-low end-to-end delays
and multi-gigabit-per-second data transmission. Millimetre Waves (mmWaves)
communications can fulfil these requirements. However, the increased mobility
of Connected and Autonomous Vehicles (CAVs), requires frequent beamforming -
thus introducing increased overhead. In this paper, a new beamforming algorithm
is proposed able to achieve overhead-free beamforming training. Leveraging from
the CAVs sensory data, broadcast with Dedicated Short Range Communications
(DSRC) beacons, the position and the motion of a CAV can be estimated and
beamform accordingly. To minimise the position errors, an analysis of the
distinct error components was presented. The network performance is further
enhanced by adapting the antenna beamwidth with respect to the position error.
Our algorithm outperforms the legacy IEEE 802.11ad approach proving it a viable
solution for the future ITS applications and services.Comment: Proc. of IET Colloquium on Antennas, Propagation & RF Technology for
Transport and Autonomous Platforms, to appea
Improved Handover Through Dual Connectivity in 5G mmWave Mobile Networks
The millimeter wave (mmWave) bands offer the possibility of orders of
magnitude greater throughput for fifth generation (5G) cellular systems.
However, since mmWave signals are highly susceptible to blockage, channel
quality on any one mmWave link can be extremely intermittent. This paper
implements a novel dual connectivity protocol that enables mobile user
equipment (UE) devices to maintain physical layer connections to 4G and 5G
cells simultaneously. A novel uplink control signaling system combined with a
local coordinator enables rapid path switching in the event of failures on any
one link. This paper provides the first comprehensive end-to-end evaluation of
handover mechanisms in mmWave cellular systems. The simulation framework
includes detailed measurement-based channel models to realistically capture
spatial dynamics of blocking events, as well as the full details of MAC, RLC
and transport protocols. Compared to conventional handover mechanisms, the
study reveals significant benefits of the proposed method under several
metrics.Comment: 16 pages, 13 figures, to appear on the 2017 IEEE JSAC Special Issue
on Millimeter Wave Communications for Future Mobile Network
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
MAC Aspects of Millimeter-Wave Cellular Networks
The current demands for extremely high data rate wireless services and the spectrum scarcity at the sub-6 GHz bands are forcefully motivating the use of the millimeter-wave (mmWave) frequencies. MmWave communications are characterized by severe attenuation, sparse-scattering environment, large bandwidth, high penetration loss, beamforming with massive antenna arrays, and possible noise-limited operation. These characteristics imply a major difference with respect to legacy communication technologies, primarily designed for the sub-6 GHz bands, and are posing major design challenges on medium access control (MAC) layer. This book chapter discusses key MAC layer issues at the initial access and mobility management (e.g., synchronization, random access, and handover) as well as resource allocation (interference management, scheduling, and association). The chapter provides an integrated view on MAC layer issues for cellular networks and reviews the main challenges and trade-offs and the state-of-the-art proposals to address them
- …