Effect and Compensation of Timing Jitter in Through-Wall Human Indication via Impulse Through-Wall Radar

Impulse through-wall radar (TWR) is considered as one of preferred choices for through-wall human indication due to its good penetration and high range resolution. Large bandwidth available for impulse TWR results in high range resolution, but also brings an atypical adversity issue not substantial in narrowband radars — high timing jitter effect, caused by the non-ideal sampling clock at the receiver. The fact that impulse TWR employs very narrow pulses makes little jitter inaccuracy large enough to destroy the signal correlation property and then degrade clutter suppression performance. In this paper, we focus on the timing jitter impact on clutter suppression in through-wall human indication via impulse TWR. We setup a simple timing jitter model and propose a criterion namely average range profile (ARP) contrast is to evaluate the jitter level. To combat timing jitter, we also develop an effective compensation method based on local ARP contrast maximization. The proposed method can be implemented pulse by pulse followed by exponential average background subtraction algorithm to mitigate clutters. Through-wall experiments demonstrate that the proposed method can dramatically improve through-wall human indication performance

An Extended Virtual Aperture Imaging Model for Through-the-wall Sensing and Its Environmental Parameters Estimation

Through-the-wall imaging (TWI) radar has been given increasing attention in recent years. However, prior knowledge about environmental parameters, such as wall thickness and dielectric constant, and the standoff distance between an array and a wall, is generally unavailable in real applications. Thus, targets behind the wall suffer from defocusing and displacement under the conventional imag¬ing operations. To solve this problem, in this paper, we first set up an extended imaging model of a virtual aperture obtained by a multiple-input-multiple-output array, which considers the array position to the wall and thus is more applicable for real situations. Then, we present a method to estimate the environmental parameters to calibrate the TWI, without multiple measurements or dominant scatter¬ers behind-the-wall to assist. Simulation and field experi¬ments were performed to illustrate the validity of the pro¬posed imaging model and the environmental parameters estimation method

Design and application of microstrip leaky wave antennas for radar sensing

textThis dissertation investigates the application of the frequency-scanned beam of a microstrip leaky wave antenna (LWA) to track humans in the two-dimensional (2-D) range-azimuth plane. The history, operating principles and frequency-scanned properties of a microstrip LWA are first reviewed. The basic concept of using a microstrip LWA to track humans is verified by designing, building and testing a broadband microstrip LWA, developing the necessary processing algorithm, and collecting data using a vector network analyzer. A number of topics are then investigated to further advance the concept. First, the idea of combining the frequency-scanned antenna with a short-pulse ultra-wideband (UWB) radar is developed to realize a portable, real-time system for human tracking. The radar concept and the components of the system are discussed in detail. Line-of-sight and through-wall measurements of a human subject are carried out to demonstrate the performance. Second, a new LWA structure is proposed to achieve a narrower azimuth beam, which requires both a small leaky-wave attenuation constant and a long aperture. The transverse resonance method (TRM) is applied to analyze the proposed structure and the results are verified with measurements of a built prototype. Third, a new signal processing technique, compressive sensing, is applied to further improve the resolution in both the azimuth and down range dimensions. The technique is tested with simulation and measurement data and is shown to produce sharper target responses in both the down range and azimuth dimensions. Lastly, the radar cross-section (RCS) of a microstrip LWA is studied. The antenna mode scattering and structural mode scattering are modeled separately. A ray picture is provided to explain the observed time-domain features using the group delay of the leaky wave.Electrical and Computer Engineerin