A Cost-Effective Fault Tolerance Technique for Functional TSV in 3-D ICs

Regular and redundant through-silicon via (TSV) interconnects are used in fault tolerance techniques of 3-D IC. However, the fabrication process of TSVs results in defects that reduce the yield and reliability of TSVs. On the other hand, each TSV is associated with a significant amount of on-chip area overhead. Therefore, unlike the state-of-the-art fault tolerance architectures, here we propose the time division multiplexing access (TDMA)-based fault tolerance technique without using any redundant TSVs, which reduces the area overhead and enhances the yield. In the proposed technique, by means of TDMA, we reroute the signal through defect-free TSV. Subsequently, an architecture based on the proposed technique has been designed, evaluated, and validated on logic-on-logic 3-D IWLS'05 benchmark circuits using 130-nm technology node. The proposed technique is found to reduce the area overhead by 28.70%-40.60%, compared to the state-of-the-art architectures and results in a yield of 98.9%-99.8%

High performance algorithms for large scale placement problem

Placement is one of the most important problems in electronic design automation (EDA). An inferior placement solution will not only affect the chip’s performance but might also make it nonmanufacturable by producing excessive wirelength, which is beyond available routing resources. Although placement has been extensively investigated for several decades, it is still a very challenging problem mainly due to that design scale has been dramatically increased by order of magnitudes and the increasing trend seems unstoppable. In modern design, chips commonly integrate millions of gates that require over tens of metal routing layers. Besides, new manufacturing techniques bring out new requests leading to that multi-objectives should be optimized simultaneously during placement. Our research provides high performance algorithms for placement problem. We propose (i) a high performance global placement core engine POLAR; (ii) an efficient routability-driven placer POLAR 2.0, which is an extension of POLAR to deal with routing congestion; (iii) an ultrafast global placer POLAR 3.0, which explore parallelism on POLAR and can make full use of multi-core system; (iv) some efficient triple patterning lithography (TPL) aware detailed placement algorithms

Placement for fast and reliable through-silicon-via (TSV) based 3D-IC layouts

The objective of this research is to explore the feasibility of addressing the major performance and reliability problems or issues, such as wirelength, stress-induced carrier mobility variation, temperature, and quality trade-offs, found in three-dimensional integrated circuits (3D ICs) that use through-silicon vias (TSVs) at placement stage. Four main works that support this goal are included. In the first work, wirelength of TSV-based 3D ICs is the main focus. In the second work, stress-induced carrier mobility variation in TSV-based 3D ICs is examined. In the third work, temperature inside TSV-based 3D ICs is investigated. In the final work, the quality trade-offs of TSV-based 3D-IC designs are explored. In the first work, a force-directed, 3D, and gate-level placement algorithm that efficiently handles TSVs is developed. The experiments based on synthesized benchmarks indicate that the developed algorithm helps generate GDSII layouts of 3D-IC designs that are optimized in terms of wirelength. In addition, the impact of TSVs on other physical aspects of 3D-IC designs is also studied by analyzing the GDSII layouts. In the second work, the model for carrier mobility variation caused by TSV and STI stresses is developed as well as the timing analysis flow considering the stresses. The impact of TSV and STI stresses on carrier mobility variation and performance of 3D ICs is studied. Furthermore, a TSV-stress-driven, force-directed, and 3D placement algorithm is developed. It exploits carrier mobility variation, caused by stress around TSVs after fabrication, to improve the timing and area objectives during placement. In addition, the impact of keep-out zone (KOZ) around TSVs on stress, carrier mobility variation, area, wirelength, and performance of 3D ICs is studied. In the third work, two temperature-aware global placement algorithms are developed. They exploit die-to-die thermal coupling in 3D ICs to improve temperature during placement. In addition, a framework used to evaluate the results from temperature-aware global placements is developed. The main component of the framework is a GDSII-level thermal analysis that considers all structures inside a TSV-based 3D IC while computing temperature. The developed placers are compared with several state-of-the-art placers published in recent literature. The experimental results indicate that the developed algorithms help improve the temperature of 3D ICs effectively. In the final work, three block-level design styles for TSV-based die-to-wafer bonded 3D ICs are discussed. Several 3D-IC layouts in the three styles are manually designed. The main difference among these layouts is the position of TSVs. Finally, the area, wirelength, timing, power, temperature, and mechanical stress of all layouts are compared to explore the trade-offs of layout quality.PhDCommittee Chair: Lim, Sung Kyu; Committee Member: Bakir, Muhannad; Committee Member: Kim, Hyesoon; Committee Member: Mukhopadhyay, Saibal; Committee Member: Swaminathan, Madhava

Investigation into yield and reliability enhancement of TSV-based three-dimensional integration circuits

Three dimensional integrated circuits (3D ICs) have been acknowledged as a promising technology to overcome the interconnect delay bottleneck brought by continuous CMOS scaling. Recent research shows that through-silicon-vias (TSVs), which act as vertical links between layers, pose yield and reliability challenges for 3D design. This thesis presents three original contributions.The first contribution presents a grouping-based technique to improve the yield of 3D ICs under manufacturing TSV defects, where regular and redundant TSVs are partitioned into groups. In each group, signals can select good TSVs using rerouting multiplexers avoiding defective TSVs. Grouping ratio (regular to redundant TSVs in one group) has an impact on yield and hardware overhead. Mathematical probabilistic models are presented for yield analysis under the influence of independent and clustering defect distributions. Simulation results using MATLAB show that for a given number of TSVs and TSV failure rate, careful selection of grouping ratio results in achieving 100% yield at minimal hardware cost (number of multiplexers and redundant TSVs) in comparison to a design that does not exploit TSV grouping ratios. The second contribution presents an efficient online fault tolerance technique based on redundant TSVs, to detect TSV manufacturing defects and address thermal-induced reliability issue. The proposed technique accounts for both fault detection and recovery in the presence of three TSV defects: voids, delamination between TSV and landing pad, and TSV short-to-substrate. Simulations using HSPICE and ModelSim are carried out to validate fault detection and recovery. Results show that regular and redundant TSVs can be divided into groups to minimise area overhead without affecting the fault tolerance capability of the technique. Synthesis results using 130-nm design library show that 100% repair capability can be achieved with low area overhead (4% for the best case). The last contribution proposes a technique with joint consideration of temperature mitigation and fault tolerance without introducing additional redundant TSVs. This is achieved by reusing spare TSVs that are frequently deployed for improving yield and reliability in 3D ICs. The proposed technique consists of two steps: TSV determination step, which is for achieving optimal partition between regular and spare TSVs into groups; The second step is TSV placement, where temperature mitigation is targeted while optimizing total wirelength and routing difference. Simulation results show that using the proposed technique, 100% repair capability is achieved across all (five) benchmarks with an average temperature reduction of 75.2? (34.1%) (best case is 99.8? (58.5%)), while increasing wirelength by a small amount

Interconnect Planning for Physical Design of 3D Integrated Circuits

Vertical stacking—based on modern manufacturing and integration technologies—of multiple 2D chips enables three-dimensional integrated circuits (3D ICs). This exploitation of the third dimension is generally accepted for aiming at higher packing densities, heterogeneous integration, shorter interconnects, reduced power consumption, increased data bandwidth, and realizing highly-parallel systems in one device. However, the commercial acceptance of 3D ICs is currently behind its expectations, mainly due to challenges regarding manufacturing and integration technologies as well as design automation. This work addresses three selected, practically relevant design challenges: (i) increasing the constrained reusability of proven, reliable 2D intellectual property blocks, (ii) planning different types of (comparatively large) through-silicon vias with focus on their impact on design quality, as well as (iii) structural planning of massively-parallel, 3D-IC-specific interconnect structures during 3D floorplanning. A key concept of this work is to account for interconnect structures and their properties during early design phases in order to support effective and high-quality 3D-IC-design flows. To tackle the above listed challenges, modular design-flow extensions and methodologies have been developed. Experimental investigations reveal the effectiveness and efficiency of the proposed techniques, and provide findings on 3D integration with particular focus on interconnect structures. We suggest consideration of these findings when formulating guidelines for successful 3D-IC design automation.:1 Introduction 1.1 The 3D Integration Approach for Electronic Circuits 1.2 Technologies for 3D Integrated Circuits 1.3 Design Approaches for 3D Integrated Circuits 2 State of the Art in Design Automation for 3D Integrated Circuits 2.1 Thermal Management 2.2 Partitioning and Floorplanning 2.3 Placement and Routing 2.4 Power and Clock Delivery 2.5 Design Challenges 3 Research Objectives 4 Planning Through-Silicon Via Islands for Block-Level Design Reuse 4.1 Problems for Design Reuse in 3D Integrated Circuits 4.2 Connecting Blocks Using Through-Silicon Via Islands 4.2.1 Problem Formulation and Methodology Overview 4.2.2 Net Clustering 4.2.3 Insertion of Through-Silicon Via Islands 4.2.4 Deadspace Insertion and Redistribution 4.3 Experimental Investigation 4.3.1 Wirelength Estimation 4.3.2 Configuration 4.3.3 Results and Discussion 4.4 Summary and Conclusions 5 Planning Through-Silicon Vias for Design Optimization 5.1 Deadspace Requirements for Optimized Planning of Through-Silicon Vias 5.2 Multiobjective Design Optimization of 3D Integrated Circuits 5.2.1 Methodology Overview and Configuration 5.2.2 Techniques for Deadspace Optimization 5.2.3 Design-Quality Analysis 5.2.4 Planning Different Types of Through-Silicon Vias 5.3 Experimental Investigation 5.3.1 Configuration 5.3.2 Results and Discussion 5.4 Summary and Conclusions 6 3D Floorplanning for Structural Planning of Massive Interconnects 6.1 Block Alignment for Interconnects Planning in 3D Integrated Circuits 6.2 Corner Block List Extended for Block Alignment 6.2.1 Alignment Encoding 6.2.2 Layout Generation: Block Placement and Alignment 6.3 3D Floorplanning Methodology 6.3.1 Optimization Criteria and Phases and Related Cost Models 6.3.2 Fast Thermal Analysis 6.3.3 Layout Operations 6.3.4 Adaptive Optimization Schedule 6.4 Experimental Investigation 6.4.1 Configuration 6.4.2 Results and Discussion 6.5 Summary and Conclusions 7 Research Summary, Conclusions, and Outlook Dissertation Theses Notation Glossary BibliographyDreidimensional integrierte Schaltkreise (3D-ICs) beruhen auf neuartigen Herstellungs- und Integrationstechnologien, wobei vor allem “klassische” 2D-ICs vertikal zu einem neuartigen 3D-System gestapelt werden. Dieser Ansatz zur Erschließung der dritten Dimension im Schaltkreisentwurf ist nach Expertenmeinung dazu geeignet, höhere Integrationsdichten zu erreichen, heterogene Integration zu realisieren, kürzere Verdrahtungswege zu ermöglichen, Leistungsaufnahmen zu reduzieren, Datenübertragungsraten zu erhöhen, sowie hoch-parallele Systeme in einer Baugruppe umzusetzen. Aufgrund von technologischen und entwurfsmethodischen Schwierigkeiten bleibt jedoch bisher die kommerzielle Anwendung von 3D-ICs deutlich hinter den Erwartungen zurück. In dieser Arbeit werden drei ausgewählte, praktisch relevante Problemstellungen der Entwurfsautomatisierung von 3D-ICs bearbeitet: (i) die Verbesserung der (eingeschränkten) Wiederverwendbarkeit von zuverlässigen 2D-Intellectual-Property-Blöcken, (ii) die komplexe Planung von verschiedenartigen, verhältnismäßig großen Through-Silicion Vias unter Beachtung ihres Einflusses auf die Entwurfsqualität, und (iii) die strukturelle Einbindung von massiv-parallelen, 3D-IC-spezifischen Verbindungsstrukturen während der Floorplanning-Phase. Das Ziel dieser Arbeit besteht darin, Verbindungsstrukturen mit deren wesentlichen Eigenschaften bereits in den frühen Phasen des Entwurfsprozesses zu berücksichtigen. Dies begünstigt einen qualitativ hochwertigen Entwurf von 3D-ICs. Die in dieser Arbeit vorgestellten modularen Entwurfsprozess-Erweiterungen bzw. -Methodiken dienen zur effizienten Lösung der oben genannten Problemstellungen. Experimentelle Untersuchungen bestätigen die Wirksamkeit sowie die Effektivität der erarbeiten Methoden. Darüber hinaus liefern sie praktische Erkenntnisse bezüglich der Anwendung von 3D-ICs und der Planung deren Verbindungsstrukturen. Diese Erkenntnisse sind zur Ableitung von Richtlinien für den erfolgreichen Entwurf von 3D-ICs dienlich.:1 Introduction 1.1 The 3D Integration Approach for Electronic Circuits 1.2 Technologies for 3D Integrated Circuits 1.3 Design Approaches for 3D Integrated Circuits 2 State of the Art in Design Automation for 3D Integrated Circuits 2.1 Thermal Management 2.2 Partitioning and Floorplanning 2.3 Placement and Routing 2.4 Power and Clock Delivery 2.5 Design Challenges 3 Research Objectives 4 Planning Through-Silicon Via Islands for Block-Level Design Reuse 4.1 Problems for Design Reuse in 3D Integrated Circuits 4.2 Connecting Blocks Using Through-Silicon Via Islands 4.2.1 Problem Formulation and Methodology Overview 4.2.2 Net Clustering 4.2.3 Insertion of Through-Silicon Via Islands 4.2.4 Deadspace Insertion and Redistribution 4.3 Experimental Investigation 4.3.1 Wirelength Estimation 4.3.2 Configuration 4.3.3 Results and Discussion 4.4 Summary and Conclusions 5 Planning Through-Silicon Vias for Design Optimization 5.1 Deadspace Requirements for Optimized Planning of Through-Silicon Vias 5.2 Multiobjective Design Optimization of 3D Integrated Circuits 5.2.1 Methodology Overview and Configuration 5.2.2 Techniques for Deadspace Optimization 5.2.3 Design-Quality Analysis 5.2.4 Planning Different Types of Through-Silicon Vias 5.3 Experimental Investigation 5.3.1 Configuration 5.3.2 Results and Discussion 5.4 Summary and Conclusions 6 3D Floorplanning for Structural Planning of Massive Interconnects 6.1 Block Alignment for Interconnects Planning in 3D Integrated Circuits 6.2 Corner Block List Extended for Block Alignment 6.2.1 Alignment Encoding 6.2.2 Layout Generation: Block Placement and Alignment 6.3 3D Floorplanning Methodology 6.3.1 Optimization Criteria and Phases and Related Cost Models 6.3.2 Fast Thermal Analysis 6.3.3 Layout Operations 6.3.4 Adaptive Optimization Schedule 6.4 Experimental Investigation 6.4.1 Configuration 6.4.2 Results and Discussion 6.5 Summary and Conclusions 7 Research Summary, Conclusions, and Outlook Dissertation Theses Notation Glossary Bibliograph

Thermal, Power Delivery and Reliability Management for 3D ICS

Three-dimensional (3D) integration technology is promising to continuously improve the performance of electronic devices by vertically stacking multiple active layers and connecting them with Through-Silicon-Vias (TSVs). Meanwhile, the thermal and power integrity problems are exacerbated since the power flux in 3D integrated circuits (3D ICs) increases linearly with the number of stacked layers. Moreover, the TSV structure in 3D ICs introduces new reliability problems since TSVs are vulnerable to various failure mechanisms (e.g. electromigration) and the failure of power-ground TSVs will cause voltage drop thereby significantly degrading the performance of 3D ICs. To make things worse, the high temperature, thermal gradient and power load in 3D ICs accelerate the failure of TSVs. Therefore, in order to push the 3D integration technology to full commercialization, the thermal, power integrity and reliability problem should be properly addressed in both design-time and run-time. In 3D ICs, the heat flux will easily exceed the capability of the traditional air cooling. Therefore, several aggressive cooling methods are applied to remove heat from the 3D IC, which include micro-fluidic cooling, the phase change material based cooling etc. These cooling schemes are usually implemented close to the heat source to gain high heat removal capability, thus causing more challenges to the design of 3D ICs. Unfortunately, physical design tools for 3D ICs with those aggressive cooling methods are lack. In this thesis, we will focus on 3D ICs with micro-fluidic (MF) cooling. The physical design for this kind of 3D ICs involves complex trade-offs between the circuit performance, power delivery noise, and temperature. For example, both TSVs and micro-cavities for MF cooling are fabricated in the substrate region. Therefore, they will compete in space: the allocation of signal TSVs should avoid micro-cavities to realize a feasible design, thus enforcing more constraints to the physical placement of 3D ICs. Moreover, power delivery networks (PDNs) in 3D ICs are enabled by power-ground (P/G) TSVs. The number and distribution of P/G TSVs are also constrained by micro-cavities which will influence the power integrity of the 3D IC. In addition, the capability of MF cooling degrades downstream the flow of coolant thereby causing large in-layer temperature gradient. The spatial temperature variance will affect the reliability of 3D ICs. in order to avoid it, the gate/modules in 3D ICs should be placed properly. In order to address the trade-offs 3D ICs with MF cooling, different design-time methods for application specific ICs (ASICs) and field programmable gate arrays (FPGAs) are proposed, respectively. For 3D ASICs, we propose a co-design method that integrates the design of MF cooling heat sink and P/G TSVs to the physical placement for 3D ICs. Experiments on publicly available benchmarks show that using our method, we can achieve better results compared to the traditional sequential design flow. The case for 3D FPGAs is more complicated than ASICs since the routing and logic resources are fixed and the chip power and temperature is hard to estimate until the circuit is routed. Therefore, in this thesis, we first build a design space exploration (DSE) framework to study how MF cooling affects the design of 3D FPGAs. Following this, we utilize an existing 3D FPGA placement and routing tool to develop a cooling-aware placement framework for 3D FPGAs to reduce the temperature gradient. Since the activity of 3D ICs cannot be completely estimated at the design stage, the run-time management, besides design-time methods, is required to address the thermal, power and reliability problems in 3D ICs. However, the vertically stacked structure makes the run-time management for 3D ICs more complicated than 2D ICs. The major reason of this is that the power supply noise and temperature can be coupled across layers in 3D ICs. This means the activity of one layer may affect the performance and reliability of other layers through voltage/temperature coupling. As a result, we cannot perform run-time management for each layer (perhaps implemented with dierent chips) of 3D ICs separately as in 2D systems. Therefore, the space of control nodes will become larger and more complicated. To make things worse, the existing run-time management techniques have various drawbacks (e.g. large off-line characterization overhead, poor scalability etc. ), which needs more eort to improve. In this thesis, we propose a phase-driven Q-learning based run-time management technique which can tune the activity of the processor to maximize the 3D CPU performance subject to the reliability constraint